2004 (T5) Volkswagen Transporter 2.5L Diesel Clutch Replacement

07376369067
www.williamsmobileclutch.co.uk
Support the Channel Donate:
www.paypal.com/donate?hosted_...

[@Mr53T]

Good camera work and lighting. No silly music and long winded explanations. A pleasure to watch !

[@WMCS]

Thanks for taking time to leave us a a review. Much appreciated

[@markb1487]

Bloody hell,, dropping the sub frame to change a clutch, on your back... Man,, that is hard graft... Totally awesome.. 👌👍💯💯

[@taipoio1]

Hey Kev, can't thank you enough. Just finished the job today and was literally following you step by step. The only difference was I found it easier to remove the suspension arm from the 2 bolts rather than the ball joint. I did panic a little bit when I couldn't work out where the speedo drive is. I though I ripped it off but its all working. Thanks for the great video. There is only one small thing that could elevate it, if you had subtitles or something showing which size tools you are using. P.S. YOU BEAST !!! THAT GEARBOX WEIGHS A F**K TON. I bitched out and used a jack to help me lift it :D

[@johnpayne2465]

Thanks Kevin - this really helped my friend get his van back on the road safely. Appreciate your post.

[@balazscsoi5198]

I really enjoy your videos. You are a very professional mechanic. Without unnecessary movements, very enjoyable content for those who respect manual work and profession. Under the car in the cold windy weather, totally alone. It can be hard paralell with this complex work to handle the camera. Respect for your work! Thank you!

[@fazzeg3]

Working on the ground like a real man, I’ve got to say you are strong Kev 💪🏽

[@omarsalamah2359]

Yesterday a mechanic replaced my clutch , but really you're an expert. I love your way.

[@WMCS]

Thank you Omar. Hope your vehicle is in full working order. That’s the main thing.

[@Youtube_executive999]

Worked under cars alot, and let me say it aint easy..... this guy is a master at clutches. Like an art form 😎🏅👍🏻

[@dld8087]

You have my respect for what you do and how you are doing it. On the cars and on the internet you are just great. Thank you for all your videos and the time you spend doing it and responding to comments

[@johnmccrank7170]

A job well done by a man who knows exactly what he's doing. Let me tell you its not an easy job.

[@ding0925]

Nice to see a mobile mechanic that actually knows how to fix a car...

[@ChrizRockster]

I feel exhausted just watching this - amazing work by a great Mechanic.

[@sterling6860]

Brave Man hard worker,,20 years ago I use to work from home in minus 20c out in Canada,,Back then nothing was too hard,,Today I removed my glow plugs on 2014 Mokka,,Iwas sore all over simply too old..I admire your determination to do that job outside,,Good man.

[@alessandrer3616]

The best mechanic in UK ! Thanks for sharing ! Have a good day man !

[@florineusebio]

la sprintere m-am bagat si eu.

[@sajidullah4490]

Lali 9110

[@michaelchapman4269]

Great video, thinking of doing mine, watching this I’m not sure I’ll bother, looks a beast of a gearbox to move!

[@CoolAirVw]

I'm super impressed! Hard working man. Tough! Strong! Enduring the weather out in the cold. Obviously, knows what he's doing! Excellent filming! I now feel like I've now done a transporter diesel. We don't have those here in USA. Mobile clutch business? Interesting business model, but I'm impressed that he's doing it! I'm a Vw diesel mechanic and a transmission guy so I would know. Subscribed.

[@WMCS]

CoolAirVw Rm thanks for a great review. Really appreciate it coming from a VW mechanic makes it the more valuable. Since I launched the business i have yet to have a day without booking. Usually it’s two weeks waiting list. I suppose it works well as a lot of my customers are at work and they come out. Vehicle is ready to head home. Or for anyone having a day off work I’m there at their premise.... so the convenience is the USP. Thanks again for taking time to visit and subscribe to the channel. Very much appreciated

[@robenhenni8463]

First time viewer, your a very talented man, will follow you, my self did a 1998 on my back so a hole lot of respect for you , from Holland 👍🇪🇬

[@Intruderzz]

Excellent work young man,a proper good wrencher,love all your vids 🧰🛠🪛⚙️🔩

[@selmanyorulmaz6619]

Hey Kevin .I watched your video with admiration. you have done really good workmanship👑👍👏👏👏👏

[@noelmason2305]

Proper!!, and all done on axle stands on your back on the floor . . . Respect bro nice to see a grafter who knows his game 💯👌🏼👍🏼

[@daryldove6236]

Kevin I’m a mechanic in bristol mate your killing these clutch jobs awesome work if you’re ever in bristol hit me up and come over for a brew stay safe bro 😎👍

[@WMCS]

Daryl Dove I might just drive up there one of these weekends and take you up on that drink.., I can be a bit of a bottomless pit I have to warn you., we drink by the cask ..🍻🍻🍻

[@boualemaitsegeur8478]

@@WMCS pornx Pppp

[@tomascz2169]

Very good work, many greetings from the Czech Republic.

[@Dcs-Brasil]

Colleague, I'm a mechanic here in Brazil. You impressed me! Congratulations!

[@WMCS]

Thanks for your feedback. Always nice to hear from a fellow mechanic

[@stevemacbr]

Ele é mesmo. Vivi 5 anos no Brasil,... e nunca vi um fazer este trabalho tão rápido,... e no chçao nas costas. Abraço.

[@dougdays8095]

You are fabulous at what you do. Im floored watching how easy you make it look

[@WMCS]

Douglas G thanks for the great review. Means a lot. Very much appreciated

[@vincentvalentin4493]

Respect !!! To do this Job on the ground. Grettings from Germany

[@WMCS]

Greetings Vincent and big helloo to Germany 🇩🇪

[@rusurextion]

I had to drop the sub-frame of a 99 Toyota Camry , to change the transmission on my back . Very nice job Sir

[@user-cs6us5px1s]

Another 1st class video many thanks stay well and safe.

[@brucequirin1754]

Keep up man, really nice to see this type or clean work

[@billrimmer5596]

This was before u got your new Milwaukee 1/2 inch and that extended fuel ratchet. Love that new ratchet. I think my wife will b buying me one of those real soon!! Great work ethic!!

[@WMCS]

Bill that’s it. The days of just spanners and ratchet. Power tools have literally cut repair times by about 1.5 hrs.

[@mrnatty122]

That clutch looked like a bloody nightmare Kev

[@dilgesbehcet866]

ف

[@trucktalkvideos]

I do them on a ramp all the time.your braver than me mate well done.

[@alanwakefield6425]

Respect to you. Amazing job 👌

[@amostecumseh6931]

fantastic video, really enjoyed it. your camera angles are the best with good light... top notch... looking forward to watching more 😃

[@markb1487]

Over 800,000 views... This is a testament to your experience and great work... None of these clutch jobs are easy.. Far from it.. Especially lay down... Great Great video.. 💯👌💯

[@WMCS]

Thank you

[@1961UK]

Watching as an old mechanic made me feel tired. Respect to you Kevin good job.

[@mjk8710]

Good work Kev ,not an easy job video excellent mate👍🏻🇬🇧

[@williamellington7708]

I recommend this guy he did a brilliant job of our car and had a little chat with him aswell 😀

[@WMCS]

William Ellington ... hey William thanks for that... that was a KIA Sorento 3.0L. Started filming and SD cars ran out of memory 😁😆

[@williamellington7708]

Kevin Williams is there anyway u could send me the video of what u recorded

[@WMCS]

William Ellington I’ll put the video together and address it to you via KZbin.

[@williamellington7708]

Did u put that video together

[@felipefernandezvilches5277]

Muy buen mecánico, bastante habilidoso, me gustan estos vídeos en los que se hace desde el suelo, con elevadores cualquiera cambia un embrague, en el suelo es otra historia. Enhorabuena

[@abdltefsd6607]

X .? Zone zhen4 b nm?

[@stevemacbr]

Concordo,... ele é muito bom e rápido.

[@spudtrainspotting9149]

Mr clutch has nothing on you matey, top job, done properly, I always drop the sub frame too, lost count of how many t5 dmf and clutches I've done, keep up the good work. A very good quality camera you have there.👍👍👍👍

[@WMCS]

Spud thanks for that vote of confidence.,, I do try and make sure the customers are getting good value for money .., when I take their hard earned cash it’s with gratitude 🙏🏽...

[@dannzx]

great video as always, it appears your hard work is getting the views it deserves soon you will have to leave your autograph! 🔧👍

[@bigjase6481]

Well done mate for sharing,you're a star pal. I will share on all t5 forums. 👍

[@WMCS]

Much appreciated

[@geraldfahey8411]

Hi Kevin just watched you on the T5 well I worked on vw 25 years and we did not like doing them well done you made it look easy.(bit puffy lifting the box back)

[@WMCS]

That 2.5 gearbox is something be to reckon with. .. big heavy lump in a small space.

[@miroslavkapuija4368]

Super,bravo!

[@BRM101]

The clutch Jedi does it again 👍

[@WMCS]

Thanks for the support as always...

[@retromechanic2238]

Fantastic watch, your work is very impressive - I know how long it can take to film & edit a video like this to this detail and that’s not even factoring in the job itself - what a machine! Great work

[@ALADDIN9999]

Big up kevin , your video help me a lot for changing my clutch ...

[@TraceElements-ti5ke]

Your camera shots are fantastic. What an artist!

[@WMCS]

Thanks for the feedback 🍻🍻

[@markb1487]

Wow,, Dual mass flywheel too.. Man.. Top top work... VW engines are notorious for the DMF packing up... 💯💯💯💯

[@daibennett9224]

These older diesels will go for every if service often,I had a Audi 1.9 tdi pd engine on a 2003,I payed 1350 for it on 160 thousand miles,4 year later it was on 300 thousand miles,the only thing I changed on that car was the bottom arms one rear spring and a window regulator,and disk pads cambelt water pump,and serviced it every ten thousand miles my self,the car was unstable,loved it,what a engine

[@aslandageev1413]

Молодец мужик руки от куда надо растут.😃

[@forddoctorforddoctor5918]

It was a fantastic time you managed to change it in but you were lucky not all VW’s come apart like this I know that from doing a few my self👍👍👍👍great vid tho👍👍👍👍👍👍👍👍👍👍😉

[@Brad-lt6mr]

You're a remarkable grafter. It bad enough doing them in a workshop on a nice ramp. Doing clutches on your back every day in all weathers. You're made of stronger stuff than me.

[@maSHEALY]

Hard work mechanics are not appreciated enough for there work good vid

[@WMCS]

spycrow lye thanks for for the support and great words of encouragement. I suppose I really enjoy what I do. I left a land rover dealership and haven’t looked back since. Been 6 years through all the seasons Monday to Friday. ... No back, knees or shoulder issues as of yet ... but then again I’m very cautious .... how about yourself do you do a bit of your own repair or a full time mechanic

[@Brad-lt6mr]

@@WMCS Yeah was on spanners for 20 years. Various dealers and AA patrol. Work for myself doing steel fab now. The rate you're going you'll be managing a fleet of vans before your back gives out. Best of luck Kev.

[@WMCS]

spycrow lye thanks a lot for the great words of inspiration. I suppose I’ve still got young age on my side ... really appreciate the fact you took time to leave some great words. Thanks again.

[@piotrogrodnik376]

Szacun koleś jesteś dobry

[@EndOf_Reason]

You always make me wanna get up and do something!

[@WMCS]

😁🍻

[@TheRobbie40]

Great work Kevin, a great video, one of the best ive seen on Utube for mechanical stuff.

[@Bizl3y]

So satisfying to watch, love your videos! How are you not sponsored yet, look at the views!!

[@WMCS]

Thanks.

[@izanami6345]

A Warrior is born Very good job ,👍👍👍

[@fjjunker8388]

Great video, great job.

[@oscarmontero5724]

6k subscribers!. Congrats! No rain at last! The owners seem not to believe that you did it all 😂 It seems also that the alternator belt is linked to the engine on gearbox side. I have never seen it. By the way, it seemed to me that you lubed a socket and the square with the red grease at near the end of the video. Is it because it is not an impact socket? Many thanks and waiting for next video! After a year I have time to watch them all.

[@darraghlenihan06]

you made lining up that clutch and lifting the box look very easy ....... 10 for effort all day long

[@WMCS]

Thank you.

[@brendn1264]

if 10 is max level this guy is easily level 11 . like awesome stuff

[@craigthompson1794]

Top job mate no messing about

[@ltramdomiser]

Really well put together instructional video. 👍🏼

[@WMCS]

Thank you 🍻✨

[@Mantvisz]

Don't forget to do a wheel aligment afterwards :) great job

[@tecksiongkung7121]

i like your pushup strength to get the gearbox in place. i once done a clutch on my own too me 2 hours just to get the input shaft spline into the clutch. still gives me nightmares.

[@2187catalin]

Nice to see that committed and hardworking men! That are not afraid to get hands dirty

[@WMCS]

Really appreciate the feedback

[@daryldove6236]

Little tip mate keep all the little rubber boots that come on new brake wheel cylinders and scutch they make great little covers to fit the ends of the hydraulic clutch lines to stop them bleeding out

[@bmwx5540]

Молодец мужик

[@sudinebabz8651]

Great vidéo again 👏👍🏽

[@joaobizarro7564]

44min to replace a clutch is not bad! ahahah Excellent video!

[@lrdisco2005]

I am way to old for that now, working outside on your back, respect.

[@WMCS]

It’s not too bad still for me. Thanks for the review

[@stevemacbr]

@@WMCS - Kev - This transporter was a big job, and you took it in your stride. Bravo !!! - You should be training up 3 or 4 young apprentices,... so you can grow your business & they can do all the heavy lifting,... and in a few years later on, ... when you feel more like lifting a pen & phone, instead of gear-boxes, they can take over. .

[@adrianalbertopanuccio8497]

Hola Kevin ! Hay que tener habilidad y fortaleza para trabajar a pocos centímetros del suelo en el cemento y con el peso de la caja de velocidades y el embrague !! Nos damos la mano mutuamente porque yo lo ise en mi VW Bora tdi en el suelo y con una espectacular pistola 18 fuel !! La diferencia fue que utilice un puente motor para soportar el mismo y moniobrar la caja de. Cambios con un pequeño aparejo de cadena ,ya que varias de las cajas de los VW poseen un cáncamo para poder hacer el izaje sin necesidad de un gato carro . Pero en tu caso excelente labor !! Saludos de argentina de Adrián !!!

[@VortechBand]

Man, the Germans really love their bolts :D

[@Anonymous-vo6dg]

Extra viel schrauben

[@cahernandezhe]

Thank you for these videos mate. I am planning to change a Mitsubishi Colt's transmission myself. How much torque needs to be the impact wrench to do that job?

[@briandanmark1886]

Great job 😊 I have been wondering how difficult it was. I am amased to see it done, even how heavy the gearbox are. Those 4 bolts/nuts in the subframe, is for the stearing gear? So left or rigththand stearing should not matter, I surpose. If one have patience it should be possible 😊

[@NSC-Modz]

At last a good work :)

[@teamalgeriaboys2008]

Great experience for me thank you

[@sebcaps59]

Very good work, you are very brave, it's a pleasure to watch! Best wishes ! Seb from France 👍🛠️😉

[@WMCS]

Thank you.

[@sivathasanmathyvannan8003]

You’re very good man 👍🙏🇩🇪

[@traconitide]

Great job!!! Thanks!!!

[@desiefiautoelectrician7150]

Your work is as good as your voice. May Allah give you more progress I watch all your videos

[@taphasamb821]

👍👍👍👍👍👍

[@user-in2hr1de4m]

Спасибо ! Все очень подробно ! Успехов вам !

[@predanyj3x797]

Красава. Мне это тоже предстоит.

[@300whisper1]

This guy doesn`t f**k around, he gets it done. 💪👍

[@henrygarcia7778]

Compadre lo felicito le hecho' pelotas solo ,es un trabajo muy rudo mis respetos...

[@pcm9656]

Excellent excellent excellence 🙏thanks much, dsmn good video..

[@WMCS]

Thanks 🍻🍻

[@matys137]

great job !!

[@colintx800]

Top man! 2000 more subscribers than 2 weeks ago :)

[@WMCS]

colintx800 thanks as always .... you’re an original member... might have to recruit you on the team 😁

[@colintx800]

@@WMCS Lol I like that 😂👍

[@WMCS]

colintx800 I’m being serious 😁... anyway hope you’re doing well as always. The sun is starting to come through and nicer longer days are back.

[@colintx800]

@@WMCS 😁 I feel like a VIP now lol. Done a brake job on my aunts car today and the sun was shining down which is always nice :) I don't always comment but I'm always here. I've seen people fighting in Tesco and Sainsbury's over toilet rolls, People are crazy lol. Hope you're doing well man :)

[@WMCS]

colintx800 mate that’s not fair at all. How come you had sunshine. ... I was pretty much in the rain all day ... filming a C4😁

[@Sadiqansari8686]

Great job perfect 👍👍

[@harryalhassan5201]

I like this work 👍👍👍

[@daiusdaius5792]

you are awesome bro I really appreciate what you are doing god bless you

[@WMCS]

Thank you

[@tanveerkhan9221]

Can't believe you done that withought ramps you are so skilled take care bro

[@WMCS]

Thanks tanveer.,, they’re not bad repairs but very heavy gearboxes

[@tanveerkhan9221]

Ur too good

[@frankbing1]

I’ve watched this guy more than once and give credit where credit is due, I’m 55 and also done these kind of things but always with the help of someone else either to pass tools or to pump up on an engine lift at least to take the weight of the box, no doubt sir your good but please don’t kill yourself lifting gear boxes on your own.

[@WMCS]

Thanks for the word of advice much appreciated

[@stevemacbr]

Kev - This transporter was a big job, and you took it in your stride. Bravo !!! - You should be training up 3 or 4 young apprentices,... so you can grow your business & they can do all the heavy lifting,... and in a few years later on, ... when you feel more like lifting a pen & phone, instead of gear-boxes, they can take over. .

[@WMCS]

Steve I don’t know if they’ll have the minerals for it. I’m training my 7yr old boy in the meantime.

[@zbigniewzylka7425]

dobra praca kevin ja tez tak naprawiam samochody swoje i kolegow ciezko bez garazu i kanalu ale damy rade pozdro z polski

[@sahamisevih6013]

Работа супер молодец

[@kappaj01]

Man.. where are the days when we pulled a Beetle engine at 18:00, pullled the gearbox, transfer the side-shafts to a new one, replace box, bleed brakes, engine back and test drive at 21:00.... This is one serious job!

[@motswadiwamonna3880]

great job man.

[@125sm3]

Another great job, dread to think the cost of the dual mass clutch replacement lol. Noticed your subs are increasing nicely. 👏👏

[@MegaMetinMetin]

~500

[@Naughty_Squad]

440-470 sasch kit

[@marklittle9342]

My 2.5 tdi taps from the top could this be a tappet are Dmf ? Loved the video top man

[@patadanut71]

Frumos,,, imi place ,,, Bravo.

[@A16LES]

very good job sir!!