Upgrading the speaker system on my brothers Toyota Corolla. Replaced the front and rear speakers with some upgraded kicker speakers. #ModdingAddiction #Toyota # Corolla
Пікірлер: 52
@JayCeeMax3 жыл бұрын
I like the step-by-step nature of your replacement. You inspired me to finally tackle the rear door speaker removal replacement of my 1992 Toyota Century V8 import (JDM). Thanks Modding Addiction.
@summer-west3 жыл бұрын
4:00 heads up.. Don't get that step wrong. Reversing polarity in any of your speakers will offset any quality gains you invested in elsewhere.
@JNT40675 жыл бұрын
IT DEFINITELY MATTER'S WHICH IS POSITIVE+NEGATIVE!!! IT'S CALLED CHECKING POLARITY. I'D ALSO HIGHLY RECOMMEND DISCONNECTING THE NEGATIVE TERMINAL ON THE BATTERY PRIOR ‼️‼️‼️
@bdog38693 жыл бұрын
Awesome step by step example. Thanks for the wonderful explanation.
@urveshgoswami70703 жыл бұрын
Thank you guys your video is very helpful.
@jakemiles77175 жыл бұрын
Believe or not I used this whole video for my guide in replacing my speakers in my Corolla very helpful!!!
@ModdingAddiction5 жыл бұрын
Heck yeah it’s m glad that it helped you. What speakers did you get?
@jakemiles77175 жыл бұрын
@@ModdingAddiction I did both 6.5 and 6x9 with kickers I also replaced my stereo with a new jvc and I have a Sony 1200w amp with (as of right now) one 10 inch sub but I was pretty glad I found a guide to this
@Dorganzola5 жыл бұрын
Dang you are gonna be bumping. That sounds like a nice setup
@jakemiles77175 жыл бұрын
@@Dorganzola I hope so the sub is a 10 inch kicker comp vr old car but all i wanted to do was upgrade the sound system.
@nickeyfynn32704 жыл бұрын
where is the wiring diagram that says the details of these Toyota cars, (Echo) sound systems. How their speakers are wired and wire colors for USA spec models? thank you.
@luisaramirez71964 жыл бұрын
I still not understand how to fit the front speakers adapter to the fabric holes. Could you explain me what you do in the video?
@BluePatch-pc7sx3 жыл бұрын
Cool, thanks guys
@Lxdeez4 жыл бұрын
I wish I would've found this video earlier today. Attempted to do my speakers and ran into that hideous factory mounting bracket. 🤦🏻♂️ So gotta wait till Saturday for the new ones. Good job.
@ModdingAddiction4 жыл бұрын
AWW man im sorry to hear that. well at least you know now. I hope that everything else is going smoothly with the install
@DoubleColt50006 жыл бұрын
Informative video! I have a question about the rear deck speakers. Firstly, I have the same speakers for the rear as you and I was wondering how you installed the rear ones. The speaker is slightly smaller than the factory speaker hole so a modified adapter bracket is needed I think. But I saw in the video you just screwed it in. Did you just drill new holes and secure it that way or how did you do it? Kind of stuck at this point...
@ModdingAddiction6 жыл бұрын
We ordered the adapter plates for it but they never came in the mail so we just drilled into the rear deck. Everything turned out ok though with a little weather stripping for vibrations and some self tappers. The rear plastics cover the speakers so looks aren’t super important
@yuluenortega35752 жыл бұрын
so if the backs are 6 ×9 what size whats the size for the front
@fatihdoner89253 жыл бұрын
Which cm this one for front door?
@AlexRomero-vb2qg3 жыл бұрын
are front and rear speakers the same size
@spacemonkey17082 жыл бұрын
How did you drill the holes ?
@tevitaloketi98393 жыл бұрын
Did u have to use for the speakers?
@arnoldoranger70503 жыл бұрын
Is there a link to these speakers on amazon
@Pallidus_Rider Жыл бұрын
KZbin recommended this video 👍
@videos86014 жыл бұрын
Thanks
@PhilsGaming6 жыл бұрын
Hello, I am planning to replace the rear deck. Can it be remove just by moving the belts out?
@ModdingAddiction6 жыл бұрын
Unfortunately no it can not. There is a couple pieces that have to come out even before you can get to the bolts for the seat belts. It’s not very hard just be carful with the c pillars. They proved to be the hardest part of the rear deck
@kalbo7074 жыл бұрын
Where did you get that speaker adapter?. The one my aftermarket speakers came with are not even close to the original bracket holes
@ModdingAddiction4 жыл бұрын
I ordered a set off of amazon. They weren’t a perfect fit but at least they worked. The Toyota has a special adapter outside of the adapter that comes with the speakers. Hope this helps
@segacorpceo5 жыл бұрын
Is there a way to do the rear without soldering like buying a connector?
@comickahn55425 жыл бұрын
segacorpceo yes. They sell connectors
@williamknowles37092 жыл бұрын
I forgot to buy the adapter plate for the rear so just laid them in for now. Did you put the speaker cover on or just left yours off. I left mine off thinking the panel would go back on better. What is your thoughts
@williamknowles37092 жыл бұрын
Plus the weather stripping doesn't seam to go on all.the way or is that how it is
@ModdingAddiction2 жыл бұрын
I just screwed the speakers into the metal. I left the covers off because the deck cover has a grate on it
@williamknowles37092 жыл бұрын
@@ModdingAddiction thanks
@aaronguenther35775 жыл бұрын
Can i have the link to those exact speakers
@ModdingAddiction5 жыл бұрын
Hopefully these show up for you. 6x9 speakers www.amazon.com/gp/aw/d/B01BLVEWLE?psc=1&ref=ppx_pop_mob_b_asin_title 6.5 inch www.amazon.com/gp/aw/d/B01BLVEVNS?psc=1&ref=ppx_pop_mob_b_asin_title Speaker adapter www.amazon.com/gp/aw/d/B007ZQGZWO?psc=1&ref=ppx_pop_mob_b_asin_title
@athero02yt3 Жыл бұрын
You know, is there any capacitor for bottom speaker?
@ModdingAddiction Жыл бұрын
I didn’t have any on mine that was stock
@LuvinooIce4 жыл бұрын
What size are the back ones
@ModdingAddiction4 жыл бұрын
They are a 6x9. The stock housing is a little bigger but the standard 6x9 will fit
@slowgoat60894 жыл бұрын
Why is it better to solder?
@ModdingAddiction4 жыл бұрын
Soldering ensures a better contact both in connectivity as there is a better contact between both wires but it is a also stronger connection. That being said butt Connected’s will work fine as the cord will never be under strain. Soldering can be less bulky too if you are taping everything up together
@r.pzr.75037 ай бұрын
did you installed it with stock stereo?
@ModdingAddiction7 ай бұрын
The stock head unit was used just a speaker upgrade
@e.r.videography62092 жыл бұрын
Twins?
@ModdingAddiction2 жыл бұрын
Little Brother
@e.r.videography62092 жыл бұрын
@@ModdingAddiction Oh cool! You look alike.
@thumperliciouz Жыл бұрын
8:27
@ModdingAddiction Жыл бұрын
Haha you got me
@mohamedyussufali85124 жыл бұрын
Not professional but don't change the terminal instead of positive to negative or negative to positive for the speaker it will affect bass in the speakers
@ModdingAddiction4 жыл бұрын
Yeah I miss spoke with that. While they still work it’s not ideal