How to Replace Headlights 2003-2008 Toyota Corolla

Buy Now!
New Headlight Assembly from 1AAuto.com 1aau.to/ib/1ALH...
This video shows you how to install headlights on your 2003-2008 Toyota Corolla. Over time, headlight lenses become dull and hazy. You'd be surprised how much that affects your night time visibility! Replacing your headlight assembly is an easy way to improve safety and appearance on your vehicle.
This process should be similar on the following vehicles:
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla
Tools you will need:
• Phillips Head Screwdriver 1aau.to/obek/1A...
• 10mm Socket 1aau.to/oa2o/1A...
• Trim Tool Set 1aau.to/o5V/1AX...
• Ratchet 1aau.to/obtT/1A...
• Gloves 1aau.to/oR7/1AX...
• Safety Glasses 1aau.to/oKr/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@TaylorZ2]

Excellent, concise video and no annoying background music. Thank you!

[@jimpaddock7745]

This took me just under a hour to complete. Thank you for the detailed video it worked out perfect with no problems!

[@kriegcore]

Extremely helpful video! Took me an hour since some of the screws/bolts were a little rusted but for a first timer I did an awesome job. 🎉

[@danstamper1475]

Waring the little rubber bumper pad screw he used little screw driver. Spray with PB blaster first. If it strips out. Pop little rubber pad off with flate head. Then can grip with visegrips.

[@Radioaktivitet]

Excellent! I have a 2004 Toyota Corolla Verso. It wasn't quite the same setup but the video helped a lot!

[@acid_bxth]

This took me about an hour, I love how my headlights look 🙏

[@EinhanderPilotSantos]

Wow here I thought this was gonna be super complicated and scary. I can do this!!

[@bucwild3158]

Love this installation instructions‼️ 😎👍

[@DrVenom14]

Thanks for the video! Can you tell me what screw sizes are used on the front bumper? I also need to know what screw is the one that has the rubber piece on it that attaches to the front grille. Any help is appreciated!

[@natepieske9382]

Very good video. Thank you.

[@agentgammer3919]

Could you please tell ua how to adjust toyota 2003 -2006 corolla headlight?

[@MrRagglefra]

When adjusting the beam, is it your low beam or do you have you high beams on?

[@teresagarmany4470]

This video was very helpful !! I replaced the headlights in my 2008 Corolla, I couldn't have done it without the video! Thank you !

[@ayshaarafath9937]

Very clear instructions! Thank you. Just wondering if it's different with a 2011 Corolla?

[@JirenVegeta]

Does anyone know the specific name of the silver ring that holds the headlight bulbs?

[@mikead24]

best video i've seen for this, took me 1.5hours, i went slow

[@pss2755]

Wow, you make looks easy, thank you

[@kimaunykreations]

Do you sell the front valance?

[@OdXUK]

Really good video - well done!

[@ratecoudo]

It is complicated