2005-2011 5 Speed Swap Issue Explained! ( How to get STARTED! )

[@neverendingcarproject]

On a 2005+ You can loop the neutral wire, and jump the pins on the ECU to avoid it shutting off without a tune. No matter what it won’t run 100% without the tune

[@JohnArnold-dc3wm]

Yes! I looped mine, and it worked, but when I just used the neutral safety switch, it ran better. The tune is needed to run 100%

[@neverendingcarproject]

@@JohnArnold-dc3wm your ECU doesn’t know the difference. The important note is you have to pull it off when it’s in neutral not park. The final resistance reading to the ECU is what determines that the way it’s going to behave.

[@JohnArnold-dc3wm]

@@neverendingcarproject you are so on! Mine is in neutral right now.

[@neverendingcarproject]

@@JohnArnold-dc3wm this is why I love panther platform. Real conversations in the comments!

[@bstfordchannel923]

I have to PIN your comment.... ,Cause this is solid info,... I was just getting his car to run.... It runs now so he is good ( for now for sure needs that tune) hey you should make very very detailed info about this subject Vince...

[@tmseh]

You make it look easy but I know it won't be. Knowledge is pow-ah! ThanQ for the videos.

[@bstfordchannel923]

The clutch master and slave is the hard part( oh! ) and cross member ( taking that out ) everthing else seems smooth...Thank you for the support brother!

[@robertdiehl9003]

Amazing. Absolutely awesome build. I'm magnetized to the knowledge Smooth, rock solid and undisputed education. Bless this man !

[@bstfordchannel923]

Thank you for the support bro... I just want to give some game out there...Just for those that want to do this...Thank you so much for the blessings and everything Rob!

[@Nathan-ct6ym]

Great video man lookin forward to what's next

[@bstfordchannel923]

thank you for the support bro...Next video should be starting ( the white vic )

[@tmseh]

Yesssssss!

[@bstfordchannel923]

right on bro!

[@KR-qs3rt]

Thanks for the great video

[@bstfordchannel923]

I am honored that you watched and comment bro! Thank you

[@misermikemodifies3827]

Share the knowledge feel the love. Good video

[@bstfordchannel923]

i left a few things out , but i wanted the guy to get the car running ( he did ) so we are good.... Thank you so much brother for the support... going Binge watch your channel now.... did you create a pl;ay list? i have to go check

[@misermikemodifies3827]

@@bstfordchannel923 I have a few play lists

[@jntcustomcars]

BST!!! My brother. How are you doing. You are really starting to kill it on your videos. This KZbin is getting serious for you now, i see. Great job. Be well sir.

[@bstfordchannel923]

thank you for all the support brother... I have been watching you videos also... I just put on play and just watch as i work or doing stuff around the house...

[@jntcustomcars]

@bstfordchannel923 sweet thankyou. My next video will be how the 2011 mustang drive shaft tranny mount and 6r80 fits right into a 2005-2010 hint hint. Lol, I know you're gonna probably go for a T56, but just in case you change your mind.

[@bstfordchannel923]

@@jntcustomcars ahhh? More Mustang stuff.... I was sitting debating something I seen a engine bay of a s197 with a 351 and it looked retro... I may give the motor mount thing a try ( i just to have a level surface ) .... Also may switch 4.6 aluminum block to iron... I think this will be better... Just debating a little right now as i write this

[@jntcustomcars]

@bstfordchannel923 Sky is the limit. we were first looking into a 6.4l from f150 385hp to start with. But we found the 4v first, and since they did use it in the gt500, we figured it should be easy. It is so far but it's time we need. Maybe 30 hours in a day instead of 12 would do it. Lol.

[@mokann7453]

Hey Wayne whats happening with your bikes these days ?

[@bstfordchannel923]

Just started to move the bikes around a bit... 1 or 2 things going to happen .. either i fix them or trash them... Simple math bro...I am going to ather the parts needed to start the 2 bikes if it works well then we do the other bike

[@sirsendit9770]

I miss the budget turbo vic

[@Befindox7]

if u set the camera down and live stream while u work and think aloud and just chat with viewers i guarantee you will have a good audience, nothing bad would come of it just sayin🤷‍♂️👍

[@ralphjones-w3g]

I have to agree I would not mind seeing this...

[@462ANIMAL]

Yeah man ! I’ll watch if I’m able to.

[@Befindox7]

@@ralphjones-w3g not to overdo things but i see your comment history on this channel and let me tell you ive been watching for 2+ years this guy has good real info, not like other "panther" youtubers, if you want real work with real results stop looking just check out his other videos. im only 23 but had only owned panthers since i was 16. ive gotten more knowledge from this guy than i have all the other panther channels combined no joke.

[@bstfordchannel923]

I was thinking about that... I do videos but i am not internet tech advanced at all bro..I would love to do it.... crazy deal i though of something driving today so i am going to make a move on something ( a idea 0) maybe that can be live...

[@ralphjones-w3g]

@@bstfordchannel923 You just have to try Befindox is right all the way...

[@moneymovest]

Could you drop a link to the longer flywheel bolts please

[@bstfordchannel923]

www.cjponyparts.com/ford-racing-flywheel-bolts-4-6l-1996-2010/p/M6379B/?year=2002&gad_source=1&gclid=Cj0KCQjw6oi4BhD1ARIsAL6pox1l7sx0htBZqFpS0Dr2UY9LPUC1u_vEJ45s7vPWnHD8ZBgG1bMQSOIaAg1HEALw_wcB

[@bstfordchannel923]

sorry for the late reply i am sitting here for about 2hrs trying to reply to everyone

[@2H2521]

Has anyone ever told you that you sound like the actor Cuba Gooding Jr?