2005 Mazda 3 Crankshaft Sensor Replacement EASY

[@housepumpinpc3983]

You are the only person saying the 9th tooth from the gap. I placed the screw in the harmonic balancer and lined up the sensor in the middle of the 9th tooth with the line in the middle of the sensor. Thanks tremendously.

[@gqautodiagnostics]

Hello! Thank you for the comment, I really appreciate it. Keep up the good work and God bless you 🙏

[@ykmalachi]

This is the only video showing the part about the 9th tooth. Thank you.

[@gqautodiagnostics]

Thank you for your comment. I am glad that you found the video helpful. Please consider subscribing to the channel and God bless you.

[@Tavinho502]

@@gqautodiagnostics I'm confused cause another video suggested 20th tooth 😔

[@nyeahgarner2420]

@@Tavinho502 5th tooth from a larger gap.

[@squallluis03]

Was having a bad day, you made this look relatively easy. I will try this tomorrow and update. Thank you!

[@gqautodiagnostics]

Hello, keep me posted with your repair. Have a great day and God bless you 🙏

[@jodiehighroller9820]

How did it go

[@squallluis03]

@@jodiehighroller9820 It was a bit more challenging given some unforeseen setbacks and the weather but I wouldn’t have been able to do it without this video.

[@Pwickrebuilds]

Working in a shop at school and about to do this as a job thank you for the awesome video!

[@gqautodiagnostics]

Thank you for the kind comment. Good luck with your repair. Please consider subscribing to the channel and God bless you.

[@joselepez5854]

@@gqautodiagnostics will the car not start if the crankshaft sensor is not lined up ? I am currently working on a 2010 Mazda3i 2.0 & I took the crankshaft sensor off to seal the timing cover before installing the new engine since my old engine got rod knock, but the car won’t start

[@marcelinodiaz7599]

Thank you, you saved me a lot of money for my mazda 3 2006 2.3 lt.

[@gqautodiagnostics]

Hello, thank you for posting your comment. Glad that the video helped you. Keep up the good work and God bless you 🙏

[@ericwilson369]

Thanks very informative

[@tollefreyerson6710]

Good job!! Nice video!

[@gqautodiagnostics]

Hello. Thank you. I am glad you liked the video and you found value on it. Please consider subscribing to the channel and God bless you.

[@robertwareheim3018]

Nice video man!

[@gqautodiagnostics]

Thank you for the comment!!

[@MirrorlessFrame]

Awesome thanks for this!

[@gqautodiagnostics]

Hello. Glad to help. please keep me posted. God bless!

[@stevenniewiedzial4883]

great video ,,god bless you also

[@gqautodiagnostics]

Thank you so much for the comment, I appreciate it. Have a great day and God bless you 🙏

[@hankhilll4651]

thanks

[@sketch8307]

My 08 mazda have 2 gaps which one do I use to start counting from left?

[@vincentbandolon-jl6nn]

How about for mazda 3 2004 1.6. Same no. of tooth to align the sensor?

[@staystrong5924]

Great video, what is purpose of the 6mm bolt m6?

[@gqautodiagnostics]

Hello. The bolt is to prevent the pulley from moving. Keep me posted

[@sketch8307]

Is it the same on a 2008 Mazda3 with 2.0 L ?

[@pedroechevarria971]

I like the ending

[@gqautodiagnostics]

Thank you for the comment and keep up the good work.

[@luisurrutia2503]

👍

[@harakelebogang7474]

My Mazda 2 crank sensor connector was cut by the belt, so now it's not starting what could be the problem? I came across so many mechanics, they are unable to fix it. Please help

[@gqautodiagnostics]

Thank you for posting your question. If you fixed the pig tail check the fuses that nothing got blown. Keep me posted.

[@kondwanimunthalimusic]

My car has a had start more especially if it has been parked some time, mazda3 2007.you literally have to crank it several times for it to start. Changed the fuel pump but there isn't much change. Sometimes it cuts when you are driving. What could be the problem?.. By the way i appreciate the works that you are doing, God bless

[@gqautodiagnostics]

Good morning, I just saw your message. Do you have a code? Check the camshaft sensor and the connector. Keep me posted. God bless

[@kondwanimunthalimusic]

@@gqautodiagnostics Hi, thank you so much for the reply. Where exactly is the camshaft sensor this model?

[@gqautodiagnostics]

@@kondwanimunthalimusic it is located o top of the valve cover by the drivers side. Keep me posted

[@kondwanimunthalimusic]

@@gqautodiagnostics ok i will thanks. Great job that you are doing🙏

[@kareemchambers6590]

Hu my fors focus 2007 have a code p2004 the idle go high when I'm in park and feels like the gas pedal being pushed it say bank 1 stuck open how do I fix

[@gqautodiagnostics]

signals that the vehicle's Powertrain Control Module (PCM) has detected that the Bank 1 Intake Manifold Runner Control (IMRC) is stuck in the open position. Check the manifold runner first. Keep me posted.

[@Tattoos.by.cristian]

Why did you change out the sensor? Was it because the car has no spark?

[@gqautodiagnostics]

Hello, excellent question. The reason was after 45 min of driving the car the sensor stopped working and the car stopped. Thank you for posting your question. Please, consider subscribing to the channel and God bless you.

[@alexg.823]

@@gqautodiagnosticshey I might be a little late but does the car started again after a while ? Mine stops working but eventually starts if I wait an hour

[@marksteen2990]

Would the Mazda 6 be the same?

[@gqautodiagnostics]

I am not sure

[@staystrong5924]

It has to be on the 20 tooth on top dead center not number 9 tooth.

[@eshperaldoamaible5435]

What is the problem when it starts but doesn't idle? But if you keep pushing the gas pedal constantly it runs... Why please help me 😭

[@gqautodiagnostics]

Hello thank younfor posting your question. It could be that you need to clean up the throttle body. Try that first. Keep me posted. Have a great day and God bless you 🙏

[@westwardsmile]

Is that ac belt a stretch belt?

[@gqautodiagnostics]

Hello. Yes, it is.

[@kenadams1224]

How do you know if the sensor is bad

[@turkish430]

​@@kenadams1224The car shuts down suddenly while driving.. sometimes will not start.. Also the Check engine light comes on so you can diagnose that using an OBD tool.