2006 Honda CRV Brake Light Fuse & Stop Light Switch Replacement - Check for Brake Light Stuck On

[@seabcarolan]

Grommet was the issues. So grateful for this video. Temporary fix was to layer two sided tape until brake light was off. Three layers did it.

[@Mr.CollectingEverything]

Great video -- the 45 degree tip to lock back the brake light switch was gold!

[@msmcjanmcgill5976]

Thank you....I was lucky because I noticed the lights still on ( don't want to imagine where I'd be if my first warning of a problem was a dead battery).Saw your KZbin video that night and tried the fuses first ,nope..checked and found plastic pieces on the floor.Bought $5 grommet followed your instructions and VOILA break lights work as they should. #female62thanksU👏

[@thespaniard5312]

Just checked my car and that was exactly the problem! Thanks friend!

[@BeardedBored]

Perfect video. I saw the busted pressure pad on the floor board, replaced it for $8 and she's back in business. Thanks!

[@frankgoodale5214]

Very handy video, I used a small teflon slider with a sticky back that is used for chair legs for an emergency fix for the evening.

[@AardaerimusDAritonyss]

Totally nailed it... My pad is disintegrated. Now, I just need to figure out where to get a new one and attempt to install it. Great video! Thank you!

[@ATXVisions]

Thanks! I should of watched this before taking it to be repaired. They did not even notice the missing disintegrated grommet. I bought the replacement for 7 dollars and the guy at the auto parts store gave me an ever cheaper hack...2 pennies and duck tape.

[@gretchenbignolet7393]

Thank you for sharing! 2 pennies & tape it will be for me until I can get a new grommet. Wonderful!! (I put a stick in the space to save my battery overnight. Tmro pennies!)

[@Songs2mySavior]

Thanks dude!!! $10 part 10 minute fix! You probably saved me $100 trip to my mechanic. 🤙🏼👍🏼

[@LehewTech]

That's outstanding my dude glad to have helped.

[@jimmyminhinnett1522]

Great video. Replaced fuses, replaced switch, replaced bulbs on left and right side. Still no brake lights.

[@russell802208]

I have the same problem

[@JorgeGonzalez-yp6ls]

What did u do to fix it?

[@eringemini7091]

You might try checking if that rubber grommet at the end of brake pedal assembly is disintegrated. I just replaced that, and the brake lights are now off, thank God( and Lehew tech).

[@mikedixon8741]

Great video. As a large dad, fixing my sons switch will require removing his drivers seat, but I never thought about the cushion the switch rests upon. Probably a tough part to find on Rock Auto!

[@kimberlywaddell4662]

Thanks for making it simple and easy to follow!! I watched 10 videos that confused the heck out of me until I found this one.

[@FrankGould]

Thank you for sharing this valuable information. Very concise instructions for dummies like me. One point to note is that when this part fails, either the switch or the pad, the cruise control stops operating until the parts work again, and the brake lights turn off. In my case, it was the pad that had disintegrated and fell onto the brake cover panel. Once I opened the panel, the broken parts fell to the floor. So, others might want to note the unoperable cruise control is the clue to what the problem really is since no pieces of the broken pad are obvious until opening the brake cover panel.

[@ronnielee7310]

Excellent video and narrating the process. Terrific job. What I thought was difficult, you made much much more manageable. Thanks

[@googlerep366]

Man you are a lifesaver I just replaced this piece and was so excited that it was only $10 piece and the brakes felt like they were locking up pulling it out and adjusting it and snapping it back in worked and that saved me thank you so much for this video You are an amazing human 🎉

[@mred9037]

THANK YOU !!!!!!!!!!!!!!!!! great instructions and saved me a trip to the repair shop, plus I can exaggerate to my friends about how I fixed an electrical problem on my wife's car

[@dbs2796]

Very useful thank you for taking the time to make this video. We got to fix my mom's car

[@mousedance]

Thank you for the assist. You just made my weekend.

[@gretchenbignolet7393]

THANKS sooo much for this video!! You saved my battery tonight & spared me lots of headache too. Now I know how to fix the issue. Yay! Thank you!

[@Jess_E2024]

Thank you! This is exactly what I needed today. Thanks for your video. 😃

[@magform]

Got it. Thank you. My switch rotated forty-five degrees counter clockwise, but no sweat? It is 104F and 52% humidity here. Could not have fixed so quickly without you.

[@xdecatron2985]

Thanks! Helped me to find the grommet issue!

[@pabloduchovny6078]

Thanks from Argentina! This video helped me fix my 2006 fit 👍

[@samulaq]

I was looking for that THANK YOU mate!

[@eringemini7091]

Aloha Lehew Tech! Mahalo Nui Loa (Thank you very much), it was a disintegrated rubber grommet, brake lights off!😁 Now I can return the brake light switch to Napa. Next; figuring out WHY the a/c & fan quit working.🙄

[@espritpath6568]

This video absolutely saved me time and money.

[@waseemquraby4125]

Such a great guy at explanation this issue, thank you so much

[@julianesq]

Thanks for this - found the disintegrated grommet on the floorboard like you said 😂

[@_ttreyy_3763]

Great Video. Very helpful and easy to follow!

[@duanet5]

Thanks for the video! It helped me greatly.

[@glengullickson6538]

BEST VIDEO! Got that fixed. Thanks.

[@lawrenceanderson6167]

good info and video. Found the grommet your talked about but in pieces. Just have to find where I can get a replacement grommet

[@bipenshrestha4095]

Thank u very much this video helps me a lottttt thank u thank u

[@drewrok78]

Thanks for the video. Well explained and to the point.

[@Adventureforever82]

Super help. Thank you!

[@tommiewatt]

Well I just went and bought a new switch but as I get under here I realize that the switch is fine it just seems it’s the grommet that’s broken and missing… How do I find a new one, because one didn’t come with the switch…

[@eringemini7091]

That was awesome! Now, let's see if I can do this tomorrow! (Having my brake lights stuck in the "on" position sure explains why a few cars have been "less than polite" today!😉

[@snnysnflwrgrl3835]

thank you for making this video

[@Xexsut]

A BIG THANK you!

[@10083607]

TKS, awsome explanation. I solved my problem

[@lazyfig5367]

Great video! Thanks!

[@betog3437]

This saves a lot... Thanks...

[@mariobravo9838]

Thank you thank you !!!!!!!!!! This fixed my problem!!!!!!! Sooooooo happyyyyyyy!!!!

[@mikelloyd520]

Dam good mate. Really appreciate. Thank you

[@FitzLyn]

Thank very much for help. Good Video.

[@jambangoni]

Man, excellent video

[@mikeyush79]

Very helpful, thank you

[@georgelee1829]

Holy moly best hack ever!

[@IXxCRUCIFIEDxXI]

HEY MAN BIG THANK YOU

[@johnnyViDeO]

Superb video.

[@hellercane]

Thank you. $5 grommet. 5 minute replacement. Problem solved. 👍👍

[@glengullickson6538]

Great! Thank you.

[@eddycoronado8381]

👍😊

[@craigcarter5276]

My right side brake light won't come on I clean it with electrical cleaner and changed the bulb plus checked the fuse ?

[@BigBlackDogStudio]

Thank you for this, man

[@gregorymcgraw3681]

My brake lights go off when u turn the CRV off; when I crank it the brake lights are stuck on

[@elizabethjohn577]

Super helpful

[@GlassEagle]

Thanks!

[@TheMaggiemay77]

So needing a new brake light switch is not only for brake lights on constantly but also for brake lights not working at all?

[@user-ji2dq1ni3d]

Do u have a part number for the rubber gromet

[@orlandoluthier6167]

On my wifes to 07 crv only the top brake light turns on when depressing the brakes, fuses are good, switch appears to be working. All the bulbs are new. Do you think theres a short in a wire somewhere?

[@y.g.nb-loc6443]

Where do I get the rubber peice from my came out and I don't know where to get it from

[@chackoalex1990]

Thank you. Do you happen to know the exact brake light fuse for the 2011 Honda CR-V? In the manual it does not say break light fuse.

[@24framedavinci39]

Would a faulty brake light switch cause the lights to not come on at all? My fuse is good but all the brake lights went out at once.

[@randomyoutube1277]

Hi there,why on my honda crv 2003 when pressing brake pedal left signal comes on eny solution thank you.

[@mds2465]

I have a 2005 Honda CR-V that is identical to this one featured in the video but mine is a stick shift. I have a VSA warning light that came on yesterday and when I scanned the system for codes it said that the brake light switch was faulty so I’m assuming that is probably the culprit in my case. I’ve also had another concern with the clutch pedal. Recently I removed the clutch pedal assembly from the car so that I could grease the bushings and hardware inside of the assembly because it was squeaking every time I depressed the clutch pedal and I did my very best to line everything up correctly when I mounted it back inside the car but since then I noticed that the pedal feels slightly different in terms of the biting point. It’s not bad, just different. So my question for you is do you know if you have to “fine tune” the clutch pedal the same way as you would with the brake light switch?

[@lisbethyanthonyespinal8791]

Damn old car were better and thank you

[@jambangoni]

Saved me a lot of hassle

[@Deathhead198]

It’s a long shot but anyone have an idea as to why my driver side back break lights don’t turn on/flicker when I hit the breaks? Like when I turn on the accessorial lighting the bulbs all turn on back there, but when I hit the breaks only the middle and passenger side break lights flicker on and off when I step on the break pedal…

[@RandySellsNY]

What if the brake lights aren’t turning on at all?

[@williamsmith8041]

Can you buy just the grommet???? How can I get 1???

[@jenniferjasmin136]

If I press the break while my car is off dash lights come on. If I do so while the door is open there is also a continuous beep. Will I get zapped if I take the switch off? Am I missing a step?

[@SteveMatthewsrealestate]

Excellent video probably best I’ve seen. I am assumed I have a bad switch. The part that is confusing me is that the brake lights work fine during the day however the problem starts when I turn on the lights and the brake lights stay locked on. Any advice or just replace the switch and see what happens?

[@SteveMatthewsrealestate]

Here is a video to help explain kzbin.info/www/bejne/hF7CoqmHfrGLfLM

[@serenavega4676]

How about stuck off

[@SuperDrmojo]

Thank you for showing me this

[@mileswhittington9971]

I like you

[@mostafahassan7654]

That was really helpful man thanks so much!

[@likeasparrowinthewildernes8333]

2 Esdras 2: 31 -100 ''''''''''''''''''

[@MANILABORACAY1]

great video man - i needed this today 🫡🫡🫡🫡