2006 polaris sportsman 700 efi fuel injector replacement

[@chipdavis1]

I was trying to figure out how to get them out also. Sounds like a bargain on the new injectors. Thanks for posting.

[@davidcooper2951]

good info . . . I was going to get those you mention and on AMAZON for nearly the same price they have the input cables, so I went that route !

[@Exhalation19]

Not sure why the downvotes, this was very helpful. I took a pick and cleaned out the epoxy, then applied heat like #Michael. Filipenses said, then proceeded to pry it off by putting the injector in a vice and leveraging just as you did. Came right off, did both in 15 minutes thanks to this video. Tyvm #74chevyman1!

[@user-nf7ui7dz1z]

My 2006 Sportsman 500 ho efi was just a clip, no epoxy. At that age the plastics are losing strength so don't mess with it in the cold unless you're feeling lucky! I bought it used so who knows what all has been changed. The more I learn the more I find wrong with the ATV. One thing is for sure, it is highly unlikely I will ever buy another used one but if you do, check every square inch and read the entire service manual prior.

[@brentbanning8200]

Yes warm with heat gun after removing wire retainer. Heat 20 seconds and wiggle harness off. Super easy

[@cbstewart-fineart]

Are you working on the fuel injection system with a lit cigarette in your hand???! 🤣

[@74chevyman1]

It was break time lol plus OSHA isnt present in my garage lol

[@mrtraumaboyy4098]

How do you get the injector out??

[@chevymanZ7188]

Use a pick and a heat gun like the other guys commented on here I didn't have one at the time. Its much easier with one

[@mrtraumaboyy4098]

@@chevymanZ7188 thank you very much

[@robfiscus1852]

I can’t get that stupid Allen screw out, what is the exact size, don’t want to round it out?

[@michael.filipenses4132]

Found fast way to take em off heat em up with a heat gun theil be off in 30 seconds

[@brentbanning8200]

Remove the wire retainer with small pick or screw driver, warm injector with heat gun for 20 seconds, clamp injector in vice, wiggle harness off, super easy.