2007-2013 Toyota Corolla How to clean upstream oxygen sensor Καθαρισμός Αισθητήρα ΄΄λ΄΄

[@nprattanapan5143]

Thank you very much, and I will try to do with my car today.

[@YiannisPagonis]

Good luck my friend. I hope everything goes well.

[@ابنكركوك-ض9ع]

YOU ARE AGREAT MAN..GOOD JOB...AND I WISH GOD BLESS YOU

[@YiannisPagonis]

My friend, God is great and he knows how to give everyone what he deserves more. Thanks for everything!

[@ابنكركوك-ض9ع]

@@YiannisPagonis THANK U SO MUCH....I HAVE COROLLA 2012😁😁

[@YiannisPagonis]

@@ابنكركوك-ض9ع You are welcome my friend

[@ابنكركوك-ض9ع]

@@YiannisPagonis THANKS

[@ابنكركوك-ض9ع]

@@YiannisPagonis Are u american??

[@callmebackfriday2]

Thanks for the video. What is the reason we need to clean this? is it Check Engine Light turn on? Rough Idle? or part of 50,000 maint. schedule? Thank you

[@YiannisPagonis]

a. Oxygen sensors get contaminated by chemicals that leak into the exhaust. For example, silicates enter the area when the coolant leaks because of a crack in the cylinder wall or a leaking head gasket. b. The bright orange Check Engine light in your dashboard will usually glow if you have a bad oxygen sensor. However, a Check Engine light could also be from another problem with your engine, or even a loose gas cap. c. Maintenance (cleaning) of all oxygen sensors must be done every 40,000-50,000 kilometers.

[@callmebackfriday2]

@@YiannisPagonis Thanks for your information and explanation.

[@YiannisPagonis]

@@callmebackfriday2 You are welcome my friend 💗💗💗😊😊😊

[@KOSTSAV68]

Μπορουμε να χρησιμοποιησουμε καθαριστικο ηλεκτρικων επαφων, οπως για παραδειγμα το WD-40 Specialist kontakt spray ?

[@YiannisPagonis]

Φυσικά και μπορείς

[@dogukanbalki2110]

Can we use WD40 for cleaning spray ?

[@YiannisPagonis]

WD-40, gasoline, or carburetor cleaners are the solutions to help remove and clean the oxygen sensor effectively. Soft brush to remove “stubborn” dirt. Soft towel: dry the sensor after cleaning. In addition, you should also prepare extra gloves and glasses to avoid getting stuck with gasoline and cleaning solutions.

[@dogukanbalki2110]

@YiannisPagonis thanks for help brother, regards from Turkey. 😊

[@YiannisPagonis]

@@dogukanbalki2110 You are welcome my friend, regards from Greece, too.😊

[@hlias0224]

Καλησπέρα μπορούμε να το καθαρίσουμε και με το σπρέι που καθαρίζουν τους MAF?

[@YiannisPagonis]

Καλησπέρα φίλε μου. Ναι φυσικά και μπορούμε. Ο καθαρισμός με σπρέι για MAF είναι απλός, ασφαλής και γρήγορος. Ασφαλές για αισθητήρες οξυγόνου και καταλυτικούς μετατροπείς.

[@Mrallrounder7777]

After cleaning put it back in thw engine or let it dry?

[@YiannisPagonis]

Dude this dries really fast (less than 1 minute) and don't worry about putting it on your engine quickly

[@harutharutunian6202]

Good job Yiannis. Thank you for the incredible video. My question, does it have one Oxygen sensor or two?

[@YiannisPagonis]

It has 2 oxygen sensors my friend👭👬👫

[@td1987]

What size socket did u use to remove o2 sensor? thank you

[@YiannisPagonis]

It is 22 mm socket my friend 😊😊😊

[@jackbrown3270]

will this fix hiccup on acceleration when cold?

[@YiannisPagonis]

Sorry but I did not understand what you mean. What exactly do you mean;

[@KiiDKali]

@Jack Brown do you mean misfire?

[@mikmik4205]

What is the torque tightening

[@YiannisPagonis]

The Torque is: 44 N·m (449 kgf·cm, 32 ft·lbf) my friend ❤❤❤

[@mikmik4205]

@@YiannisPagonis great stuff did u used any copper grease on threads

[@YiannisPagonis]

@@mikmik4205 No my friend I did not use because I did not have. We need to use copper grease to make it easier to remove the sensor but also to protect the threads from rust and high engine temperatures.

[@DougHinVA]

so why not show us just where it is to start with and what it does?

[@Just22Jas33]

Cuz that's what's Google is for

[@K_N_44]

Is it recommended to clean it and is it safe?

[@YiannisPagonis]

Yes, it is 100% safe. It is tested and there is no problem. Don't be afraid of it.

[@K_N_44]

@@YiannisPagonis Do i need to clean it after check engine code is on or something? Have you ever got an oxygen sensor go bad?

[@YiannisPagonis]

@@K_N_44 Dude, what exactly do you want to do with your car? What's its problem?

[@K_N_44]

@@YiannisPagonis i have check engine light with code P2196 and it says bank1 sensor 1

[@YiannisPagonis]

@@K_N_44 My friend, all you have to do is remove it, clean it and put it back. Then disconnect the negative terminal of your battery for about 15 seconds. Then reconnect the battery and start the engine. Maybe that's the problem with dirt. Also check the condition of the sensor cable for any damage or cuts.

[@christostsiaousis398]

Για ποιο λόγο καθάρισες τον αισθητήρα? Σου δημιουργησε κάποιο πρόβλημα? Ή προληπτικά?

[@YiannisPagonis]

Όχι φίλε😎 μου δεν είχα κάποιο πρόβλημα. Απλά για προληπτικούς λόγους, είναι θέμα καλής συντήρησης αυτοκινήτου.

[@ademkoyuncu2029]

Bunu kaç km yapmalıyız

[@YiannisPagonis]

Her 50.000 kilometrede bir

[@mikmik4205]

There is lots inside how to clean inside then

[@YiannisPagonis]

Of course with the cleaning spray. Use a very good cleansing spray, like the one I use in the video. Insert the cleaning spray hose into the hole of the oxygen sensor and then you will see that most (if not all of the charcoal) dirt will be removed. Repeat this process several times.

[@mikmik4205]

@@YiannisPagonis great thanks a lot

[@YiannisPagonis]

@@mikmik4205 You are welcome my friend ❤❤❤❤❤❤

Carb cleaner contains about four known carcinogens including Toluene so ffs wear disposable gloves.

[@YiannisPagonis]

Thanks my friend for the info. Next time I'll be more careful.

[@ahmedalasady6111]

❤

[@marcinek100]

Idiot oxygen sensor bye bye ,never ever clean oxygen sensor.

[@YiannisPagonis]

What do you mean my friend? Didn't you clean it?