What if I wanted to run a complete different amp for door speakers. Being connected to stock amp can I still do so? Or will I have to bypass the factory?
@bears8932 жыл бұрын
Thanks in advance!!
@BossLyfeTony Жыл бұрын
@provo beast Audio what type of terminal do I need for my ground wire to hook it on that stud 2007 tahoe
@AccessGranted95 Жыл бұрын
@@bears893bypass factory. I’m gonna run the RCA’s from back of headunit to the 4 channel, then speaker wire to each door speaker
@MrSlm19812 жыл бұрын
I’ve wrecked my brain on how to run my power wire for over a year, currently it’s running down the passenger side and through the spot between the door and fender, squishing the wire and causing it to loose a lot of power. When the door is open you can definitely hear and feel a difference. I’m definitely about to go back out and run it this way. Thank you a million times over. I appreciate it!
@travisfehlman7433 Жыл бұрын
Fd`0
@mattt9909 Жыл бұрын
Ya bro that’s ridiculous. Always use a firewall
@MrSlm1981 Жыл бұрын
Update, amp blew not long after this post. Warranty the amp, it’s still sitting in the box waiting to be installed. I’m slowly buying all new wire, going from 0 Down to 4 or 6
@Luminous.Dynamics8 ай бұрын
@@MrSlm1981 Unplug the power wire and remove it. You dont wanna burn your SUV down. Def route it like in this vid
@zealandwylie4898 ай бұрын
Samee here dude
@DanielDaniel1 Жыл бұрын
Really clean install my guy! This basically got me all set to get my sierra Denali bumping
@JedGrant20 күн бұрын
Would love to see how the LOC power and ground are connected here.
@jordanhamilton59452 жыл бұрын
Great info and quality video/audio. Will definitely subscribe. Thanks for posting!
@mack6062 жыл бұрын
Beautiful damn work just beautiful a true professional
@justinwilliams4009 Жыл бұрын
I followed you step by step but inonly have bass when i unplug ome of my RC cables ..
@samoantribe4790 Жыл бұрын
How does it sound tho? I see a lot of videos of how to install it, but nobody ever shows it working.
@jaysautoandmore1771 Жыл бұрын
No comment.🤔
@ilikebmx4056 күн бұрын
If I have an aftermarket receiver do I still need a line output converter with the Bose system? Or just connect rcas and remote wire to the receiver
@RaymondBurkes3 ай бұрын
Y'all did a great job name Raymond
@JP-Swag6 ай бұрын
In theory what would happen if one would connect both positives of the pac cables to one positive of the stock amp wires and both negative pac wires to one negative of the stock amp wires?
@jdawg951321 күн бұрын
I hooked it up the way you did it but the sound from the subs are not as strong. Everything works but just the subs are not bumping fully. Any thoughts on what I did different?
@neddyairsoft3972 Жыл бұрын
So I have the stock radio. I have the Bose logos in the A pillar tweeters. I when I went to install the converter in the plug in the center console. I noticed it doesn’t have anything to plug in down there. It’s missing the female side. No wires missing a plug or anything. Thoughts?
@tarathunder66183 ай бұрын
Where did you connect the positive and negative from the loc
@markbauer9393Ай бұрын
I can't get my power through the channel along the door, it's full of factory wires
@leonsines247 Жыл бұрын
Should have put a piece of abs under the amp... You are suffocating it for air in the vents underneath mounting it on the carpet
@licoreimusic48762 ай бұрын
Location for the remote wire if you are using an rca converter???
@robertohernandez72056 ай бұрын
I have no sound followed instructions exactly added ground and no ground ie brown wires and still nothing . Any suggestions?
@ericgibson152 жыл бұрын
How to do you connect the fuse if using a extra battery
@dumbledoresarmy7569 Жыл бұрын
Isn’t that ground spot right above the fuel tank? I’m afraid I’m going to puncture it
@andrewguthrie545 Жыл бұрын
Where did you buy the 2 brown wires the grounds at did you hook them up to something?
@ethanheld56516 ай бұрын
How do you remove that cover under the dash where you tapped into for the remote wire?
@humberto91marquez Жыл бұрын
Will this process work on my sierra? I have the same dash. It’s a 2008 sierra slt
@ChappieSlappie21610 ай бұрын
Instead of the PAC GM31 I used the NUITH kit basically the same. Issue I’m having is that the rear speakers don’t seem to be connected. Would I still need to tap into the Bose amp even though I used the wire harness for camera and steering wheel control?
@Southern6128 ай бұрын
How do i take that box out to connect the remote cable to the pin any help?
@brandonloiseau7248 Жыл бұрын
The guy before me had this thing (07 yukon) all wired up and has wires ran and I noticed on my bose amp there is just straight speaker wire spliced into the wires on connector…what does that mean?
@amaurisperez4584 Жыл бұрын
professional thanks 👍🏼👍🏼👍🏼👍🏼👍🏼
@ProvoBeastAudio Жыл бұрын
Thanks 👍
@KSmove Жыл бұрын
What socket or light did you use as a remote
@calebward80552 жыл бұрын
How did you set the line out converter. Can you just turn it all the way up?
@jordanretros Жыл бұрын
What did you do with the other wires from the line out converter? Capped off?
@kylewood95939 ай бұрын
Wondering the same thing
@justinwilliams4009 Жыл бұрын
Wheres the brown wires go
@ProvoBeastAudio Жыл бұрын
Those are Audio grounds if you have any noise in the signal. If no noise, they are not needed.
@kylekipfmiller63927 ай бұрын
Do you have a full install video??
@pistol850 Жыл бұрын
would anyone have a picture of the actual wire diagram with the colors of the wires? I thought the dark green and the dark blue were the positive rear speakers?
@djmixerofficial12749 ай бұрын
You recommend to install a capacitor ?
@jameerchavis61356 ай бұрын
Same thing needed to run mids and highs or is it best to just run new speaker wire through each door?
@ProvoBeastAudio6 ай бұрын
Depends, but usually if your factory wiring is in good shape, you can use a T harness or Bose amp bypass to send your signal to each new speaker. OEM wiring generally can support up to about 100w RMS.
@tannermiller30312 жыл бұрын
What do you suggest setting the gain dials on the line output converter so as not to interfere with dialing in the gain at the amp?
@kick_then_shift Жыл бұрын
Buy a SMD DD1. Check out his videos on KZbin he will walk you through it all. Steve Meade is his name
@BlackLung9112 жыл бұрын
Nice Fuse Holder. :)
@coverthigh2 жыл бұрын
Okay where would be the second best place to put those if I’m using the back could I have one set behind the passenger seat?
@Brando-n3t Жыл бұрын
Now she’s a hunny bunny 🐰😈😂🖤
@torosantana74897 ай бұрын
I’m now wondering if I could tap into the factory head unit on my 05 Silverado (with the Bose system) to add a subwoofer. I think the factory radio would look cleaner. Do you think it’s possible?
@nateweiner88904 ай бұрын
I did it
@charleswilliams33362 жыл бұрын
Question for you @promobeastaudioinstallation I put a aftermarket pioneer dmh-341ex radio in my 07 Yukon Denali XL and 2 amps and 4 super tweeters and 4 midrange speakers and 2 15s I ran my 0ga power on driver side of the truck and rca's on the passenger side but I'm still hearing engine nosie through my system could you help me out with that
@ProvoBeastAudio2 жыл бұрын
Check your grounds, clean them up. Also consider moving grounds to the frame directly. Replace RCA cables, or your radio could be the problem as well. Generally poor quality RCA cables and bad grounds are the culprit.
@charleswilliams33362 жыл бұрын
@@ProvoBeastAudio okay good looking out bro
@skylineauto4414 Жыл бұрын
Do you have to run a 1 ohm amp to utilize the pac module so you don't have to change the factory radio? I'd like to keep my factory radio if I can
@sammysmith082 жыл бұрын
What does it mean if your Yukon doesn't have any audio to anything that requires sound
@tatuado5875 Жыл бұрын
I have a 2011 yukon I already put an after market radio so all i have too do is run my rca from back of unit and remote no need for a converter correct
@d4b4y4re4kid Жыл бұрын
Correct
@jordanwoods11 ай бұрын
I’m following this video but I need a ground point for the line output converter I bought. Where can I do that?
@ProvoBeastAudio11 ай бұрын
Depends where you are installing it. Any chassis ground is fine, bare metal, etc.
@brandonbattle29962 жыл бұрын
Having problems with the remote wire. We tried every fuse on the side. Amp still stays on and it’s getting very aggravating
@Mississippidawg2 жыл бұрын
It’s not on a true remote line on the head unit. Have to find it
@brianwaller7383 Жыл бұрын
In my install I had to install a switch because I was having the same problem. But I’ve since upgraded to a down for sound amp that has a Bluetooth bass knob that turns on the amp. So I don’t need the switch anymore
@d4b4y4re4kid Жыл бұрын
I tap it to an loc since the loc gets the signal from the rcas
@kuntryboi86715 күн бұрын
Having the same issue now on a 2010 burb ltz. Stays on when connected to fuse panel on the driver side dash.
@Powerstroke904 Жыл бұрын
Hey Provo, I followed these instructions perfectly and did everything the same. When I first turned my key forward all was good sub was playing then I turned the key off to clean up some wires and turned the truck on to test run the sub and now I’m getting absolutely no sound out of my speakers 😂. I’ve checked everything amp fuse, radio fuse and wires to them. 2008 gmc Yukon xl Denali Bose system I’m guessing I fried the stock amp somehow but have absolutely no idea how that could of happened. Any idea?
@grantbelleville3828 Жыл бұрын
What did you find out?
@Cybernetic26311 ай бұрын
Is T tabs conector any good?
@thebernsteinbears61378 ай бұрын
How much does it cost to do that?
@kick_then_shift Жыл бұрын
So you put an aftermarket radio why did you use a converter for the sub? Why not wire right into the head unit... im sitting scratching my head why you would do that. You'll never get the quality sound out of that pac like rca's directly to the head unit...
@ProvoBeastAudio Жыл бұрын
Radio in this vehicle was the factory navigation, not an aftermarket radio which is why we pulled our signal from the factory Bose sub. If you had an aftermarket unit, yes, you would alternatively run your RCAs to the sub output of your new radio.
@PabloChacon12 жыл бұрын
i have a 12 in my back of my tahoe running 1500 watts and i was playing music and it turned off but the amp is still on and all wires are all hooked up and no chance it blew up , idk if you know whats wrong or if someone can help ?
@caydenbowman10792 жыл бұрын
Possible the signal wires from the stereo because loose or unplugged
@MICHAL-ck3sh Жыл бұрын
At what point should you upgrade the factory alternator so that the electrical system of the vehicle is not over loaded with the amp drawing power?
@torrez8144 Жыл бұрын
1500watts is a good amount of power but it’s not a lot to kill the alt, a good lithium battery as the main and in the back with big 3 and 0 gauge all around and you would be set with that same setup with no significant voltage drop
@Luminous.Dynamics8 ай бұрын
@@torrez8144 I think these tahoes come with either 120a or 145a alts from the factory, it should be okay with even a 1.5k class D monoblock
@doughpywidit41127 ай бұрын
@@Luminous.Dynamicswhat if i run a 2,000 watts? It should still be fine ?
@Luminous.Dynamics7 ай бұрын
@@doughpywidit4112 2K rms? Which amp?
@doughpywidit41126 ай бұрын
@@Luminous.Dynamics soundstream BXA4-1800 has 1,800 watts
@scapy1012 жыл бұрын
I’m planning on setting my gains with the smd also but what did you give yourself for a reference point since this radio doesn’t show a volume number?
@ericfulmer25467 ай бұрын
My factory radio W/ Bose, no navigation, maxes out at 45 clicks. I used an SMD DD1 off the high level, feeding Subwoofer under center console. I detected distortion W/ Test Track 40MHz, at 31click - No distortion at 30 clicks. Hope this helps!!
@keons1585 Жыл бұрын
If you have the bose sound system do you need to replace the stereo for the remote wire and rca?
@ProvoBeastAudio Жыл бұрын
Nope, a simple line out converter will do (just like we used in the video).
@keons1585 Жыл бұрын
@@ProvoBeastAudio thank you
@shawnbeach1421 Жыл бұрын
If im running a 3k watt amp could i still run it from the factory fuse too?
@ProvoBeastAudio Жыл бұрын
With 3k RMS, you will want to not only go directly to the battery, but you will need an upgraded battery, potentially a secondary battery, big 3 upgrade, etc.
@alxa1683 Жыл бұрын
1800 Watt amp is fine to use with my vehicles single agm battery right? No upgrades needed?
@Mayjah_flexx Жыл бұрын
You’re fine. Only if you’re going 3000w or more is when you need to upgrade the wiring, alternator, and secondary battery.
@doughpywidit41127 ай бұрын
@@Mayjah_flexxso 2,000 watts is fine for that fuse under the hood?
@grandchampnino37082 жыл бұрын
I followed your steps with an after market radio. When I turn everything on the subs we’re playing something different than my radio & when I switch to Bluetooth it plays the music but the amp goes off and subs don’t play. What could be my problem??
@ProvoBeastAudio2 жыл бұрын
A wiring issue to me. Your remote turn on wire may be connected to the antenna blue wire of your aftermarket radio instead of your remote turn on wire. Way too many variables to diagnose here in a youtube comment.
@grandchampnino37082 жыл бұрын
@@ProvoBeastAudio I appreciate your response. I’ll check that out again
@brianwaller7383 Жыл бұрын
Anyone looking for a cheap way to install battery bus bars. Just buy mending brackets at Home Depot, get some half inch screws with nuts and got bus bars for under $20
@dominikausten772611 күн бұрын
Honestly worst way to run it that rubber grommet is like 3 inches thick
@isaacspotify26972 жыл бұрын
How much would you charge for a install like this ?
@ajrivera21842 жыл бұрын
150;
@merk12842 жыл бұрын
Will it fit under second row seats?
@ProvoBeastAudio2 жыл бұрын
The amp? It did for us.
@eddyg95052 жыл бұрын
Will a convertor still be needed regardless of having the stock radio or aftermarket head unit with the bose system?? Thank you for the video!
@ProvoBeastAudio2 жыл бұрын
If you have an aftermarket radio, no line out converter needed as you will just run RCA cables from the sub output of the new radio to the amp.
@eddyg95052 жыл бұрын
@@ProvoBeastAudio awesome thx for the reply!
@elcompacarlos5999 Жыл бұрын
Hey are you located here in Provo utah ?
@ProvoBeastAudio Жыл бұрын
Not Provo exactly (but that was the city where the channel was formed), but we are in Utah county!
@elcompacarlos5999 Жыл бұрын
Ohh okay I stay in Provo I like your videos also I need help with audio you stil doing it ?
@BRANDON830208 Жыл бұрын
I don’t have any power
@tannermiller30312 жыл бұрын
Did you not hook up the ground wires on the line out converter?
@ProvoBeastAudio2 жыл бұрын
It's an audio ground (optional), not a DC ground, and in most instances used to help reduce ground loop noise. We didn't have that issue, thus wasn't necessary to connect.
@tannermiller30312 жыл бұрын
@@ProvoBeastAudio thank you. Just finished my install today and your video was my prime resource. Especially specifying which wires to splice to with the line out converter in the console. Thank you for taking the time to put it together.
@keithbutler7896 Жыл бұрын
My line out has a yellow 12volt ignition and ground, do I need run to fuse box?
@victoriabriones18952 жыл бұрын
Where are you located
@ProvoBeastAudio2 жыл бұрын
Utah!
@DJReminisce_4072 жыл бұрын
Do you sell the mounts you used for the fuse? I’d really like to get one made
@ProvoBeastAudio2 жыл бұрын
We don't sell them privately, sorry!
@kevinestrada42942 жыл бұрын
I have a question on my Tahoe I don’t know where to hook the battery cable on my aftermarket radio
@tylormiller54862 жыл бұрын
Was the skar 4 gauge ofc amp kit good for this setup?