2007 - 2014 Dodge Avenger Amp and Sub Install

[@ProvoBeastAudio]

Parts used linked in the description of the video!

[@ChristopherTeerlink]

Great install video, thanks for the help!

[@jonathanhorta9525]

Can you make a video of how to connect a remote wire to a cigarette lighter

[@johnfurious8419]

Thanks for the video

[@lifeofmarco8656]

Have you uploaded a big 3 on this car? I have this exact car and have had electrical issues before, and i feel like a big 3 upgrade will help a lot. Plz upload one

[@WubbzTV]

By any chance do you remember what kind of aftermarket rims these. I'm looking for some like those

[@itsonlymyopinionok8115]

ya ok, there's NO way I would be able to do this; I have no patience even for my home receiver lol lol; you make it look so easy. too many cords I'd just leave it hanging out like it is lol; think I'll get it professionally installed. Guess I don't understand stereo systems very well.. (which would help, right?) lol

[@thelegendarywasdgamer9724]

Real ez if u take it one step at a time.

[@baigutov_01]

perfect your job!

[@moncadaluis3]

My 2010 Dodge avenger don't have the same entrenar for the negative cable how else can i put it thro

[@watsonfernandez226]

. How did you do the big 3 Wiring on this Car ?

[@stephancobb13]

i was looking at a dodge avenger at a dealership. they want $9359.00 for it. it has 104,000 miles on it. i test drove it but i was wondering if my subs that i had in my 2014 ford taurus would fit in the dodge avenger......not sure if you are familiar with the Q bomb sub box, i had 2 12 inch rockford fosgate P3's with a 1200 rockford prime amp.

[@AllanNeely]

Love your videos!

[@DrKen3000]

do you need to upgrade the stereo? i have the touchscreen stock sirius xm stereo, also, how much money do you think i should sink into a 1 amp 1 sub system

[@tiffy7579]

Provo beast please please help me. I'm a female and I like to learn new things, however I initially got my beat hooked up at Arden audio . Everything was cool untill one day I was having problems with my car starting as well as kept blowing the inline fuses, thought that those problems was from the way things was hooked up or wired. So I unhooked my after market head unit and another wire that was connected to the lighter portion of the car .now I can't fix it back . Please help me cause Arden audio will charge me too much.

[@itsdknation540]

do i have to change my head unit i have a 2009 stock radio an everything do i need to change anything or can i plug in my amp an subwoofer like u did

[@ProvoBeastAudio]

Just a line out converter if retaining the factory radio: amzn.to/33lRh5u

[@cgbartlett1989]

Does anyone know what that rubber grommet is actually called? On a 2014 those are installed the other way around. When I tried to put through it, it popped out into the engine bay somewhere. Now I need to fill a massive hole. Please help!

[@JohnSmith-jb9vg]

Does the factory head unit support av cables for the amp and sub

[@jesseshine5477]

No

[@llndowe766]

I have a 08 charger that I had done and it was fine but a hour later my car won't cut back on I think I'm going to take it to the dealership to get fixed asap i tried everything but my car still won't turn on

[@tiffy7579]

Where can I purchase a smart harnesses

[@richardlacroix3523]

My dodge nitro has a factory amp so the amp I installed doesn’t work well... how do I fix that? It’s a 2008 dodge nitro RT

[@necrom66]

Good video I want to hook up my amp and subs to my stock head unit, but i'm having some trouble figuring out what wires on my stock stereo i should connect the line out converter to and so on is there some sort of diagram or something

[@ProvoBeastAudio]

Sure, but i need to know your year, make, and model. Also, this will also vary if you have the factory Boston Acoustics Sounds system too.

[@necrom66]

awesome i have a 2013 dodge Avenger SE with a stock head unit (Like the one in the link). No Boston Acoustic system Https://www.amazon.com/Chrysler-2013-17-Radio-Single-P05091195AC/dp/B079SW3QGV

[@ProvoBeastAudio]

www.modifiedlife.com/2013-dodge-avenger-car-radio-wiring-chart/

[@necrom66]

thank you guys sooo much looks like i got my self a project this weekend ! SUBSCRIBED!

[@kingking6969]

What wire do i cut to install the Converter in my 05 dodge avanger

[@Abimael27]

donde te encuentras amigo quiero lo mismo para mi avenger

[@lithesir8401]

6:55 how tf did you fish it in there???

[@jonathancamacho8606]

did you have any problems with headlights dimming because my headlights dim bad when bass hits

[@ProvoBeastAudio]

No, because of two things: 1-we upgraded the alternator wire from the alternator to the battery, and 2-we had a healthy battery. This would help stop the dimming of lights.

[@Erocketfries]

mine does this too 💀 just when i use the windows

[@qandtiffanyjohnson4179]

How to install a 2 channel amp

[@J_Love91]

What if you're installing Subs and an Amp to a factory deck that doesn't have any RCA outputs? Would I have to buy a new head unit? I've watched videos that speak about an output converter and attaching it to the rear speakers , but I figured I would get a better sound by connecting it to the Head Unit. Any Suggestions?

[@ProvoBeastAudio]

A line out converter will be your best move, whether you connect it closer to the radio, or to the rear speaker lines, it will not make a difference. If you want a direct connection to your radio, you will have to replace it. Some people still want better sound quality but don't want to replace the radio so the alternative is adding an audio processor.

[@J_Love91]

Provo Beast Audio Installation This is a first for me, but I have a head unit, i just dont have an installation kit for it or any type of wires. I figured i would just connect it to the factory unit, but common sense tells me that all of the sound would be in the back if i connect the converter to the rear speakers. If i wanted to amplify the car speakers as well, would it be better to attach the converter directly to the head unit?

[@ProvoBeastAudio]

You will need a wiring kit to hook up a sub and amp. What do you mean by all the sound in the back? Are you talking about amplifying the rear speakers or adding a sub? To amplify all interior speakers without replacing the radio, check this ford truck install where i did that. it would be easier visually to show: kzbin.info/www/bejne/sJSzqXSkj52fi6c

[@royjohnson2540]

I have mine hooked to my factory radio and I’m having an problem with my radio randomly shutting off but we can’t seem to figure the problem any advice ?

[@ProvoBeastAudio]

Sounds like a wiring issue to me. Recheck all your connections, make sure your line out converter is wired correctly, etc.

[@royjohnson2540]

Okay thanks

[@axelescalona8541]

Hi, can a subwoofer can be installed with the original stereo?

[@ProvoBeastAudio]

Yes, however a line-out-converter is required to provide signal from you factory radio to your aftermarket amplifier.

[@infidel24]

I have a vw touareg and aftermarket head units that work with all 11 speakers and the factory digital amp to avoid rewiring the entire system are impossible to find basically. I found an android based unit that works with the factory digital amp and all speakers work but there is only 1 rca out for an amp. I'm only planning on running a single sub, do I need to buy an rca splitter or just connect 1 rca lead, say the right or left one only or do I need to have both right and left connected? thanks

[@ProvoBeastAudio]

Yep, get a splitter as your amplifier is looking for a dual RCA input.

[@AllanNeely]

Do you use multimeter for gain leveling or oscilloscope?

[@ProvoBeastAudio]

Yes. But for those that don't have one at home, there are a few other ways to tune your amps: 1. you can match the gain voltage with the output voltage of your radio. Typically PIoneers are 4v so set your gains on your amps at 4 volts. Also, you can turn it up until distortion, and then back it off. Of course, the best way would be by using a DD1 Distortion detector or an Oscilloscope.

[@salamiman223]

I was going to remove my amp and subs with the wiring but I would rather not lmao. Seems way difficult and if the guy who installed it actually connected to my battery then I’m totally not removing the wheel and bumper just to access it. I’ll just leave the wiring in I guess, maybe the next person to buy my car will use them

[@meljames9920]

I thought you couldn't run all the cables together down one side

[@XxDylanRockzxX]

Mel James on 4 channel amps you shouldn't.

[@XxDylanRockzxX]

Mel James subwoofer amp doesn't really matter

[@ProvoBeastAudio]

The power wire was ran down the driver side, the rca, speaker wire, and remote turn on wire down the passenger side of the car. The remote turn on wire is a low amperage wire and will not cause any issue.

[@businessman7157]

Are you still a KZbinr have a ?

[@ProvoBeastAudio]

We still create content today, yes. See our newest videos.

[@blakejones3025]

what if your back seat dont fold down

[@ProvoBeastAudio]

You can mount your amp elsewhere, but the install process still will be very similar.

[@alonzoapodaca6313]

At this point

[@itsonlymyopinionok8115]

should make a video on how to teach this guy to clean his car lol ha ha.. so gross.

[@RiseAgainSteve]

He literally says in the video it's not his