2007 Ford mustang radio removal/kenwood install

[@brando1467]

Short sweet and to the point. You saved me a lot of time bro

[@Wickedreptiles]

Good video on the steps! One thing I would recommend is making sure your car is clean when you do it, you know for appearance

[@jptheinstallguy]

thanks for watching the video. unfortunatly the cars i work on are customer cars and sometimes they dont clean them when they come get equipment installed...SMH

[@CorvusRemalius]

Bruh u got me tickled when u threw that man stuff. I appreciate this vid my dude u helped me out 😂💀

[@jptheinstallguy]

lol i didnt mean to...thanks for watching

[@panasalsa]

It is 3 connectors on the back of the shaker 500. The wire harness on your link have two connectors. What about the 3rd connector.

[@Darth.Vaper.]

Where do i tap the amp turn-on wire from the 5521 harness onto? Thanks

[@mariuszradon8008]

Can you tell my how you connect front subwoofer ( smaler plug) to kenwood radio. I have Ford mustang stereo wiring harness and i connect red and white rca (sub speakers not working) i dont know where i must conect this blue/white wiring... ?

[@kettynhowell4497]

hey man what kind of wiring harness do you think I would need if I do have the shaker 500 system?

[@jamisondiehl5817]

When the radio turns on it makes a loud pop from the speakers, any idea what it could be?

[@sixgod5765]

You need a 12v to 6v step down

[@tltanslegacyxd7181]

Dude, can you send a link for Antenne Adapter pls??

[@davidhovik7176]

Great video right to the point.

[@bluecrush2007]

Great Video, Fast and Very Well Informed, Plus you gave part #

[@jpsaudio08]

Thanks

[@miguelcastillo2745]

Can you drop a link where I can get that radio

[@charlesmorales1666]

Hey man I wanna buy one for my mustang, but does it have a aux input or anything? I can’t drive without music

[@jokesmade719]

I really wish he had shown the wiring. Im strugglin🤣

[@Mustangladyme]

I have installed a few radio's but this one confuses me. I have a 2006 Mustang GT and I'm installing an old Kenwood. I went to plug it into the big connector where 5521 goes. I have two. That must be left over from the Shaker right?

[@jptheinstallguy]

if the other harness is a small one and you have the shaker system than plug the rca's in the sub output for the bass to come out of the woofers. if not than just hook up the 5521 and you should be fine

[@Mustangladyme]

@@jptheinstallguy thanks. I finally figured it out!! The thing that was strange is it worked black to black and never black to raw metal. Unless that needed to be defiantly the frame. Thank you again for your time.

[@josebarragan6869]

I died when he said man I just through that man stuff 💀

[@tristenlee9930]

So I have everything installed but I forgot about the shaker subs. How do I connect those to my new radio?

[@jptheinstallguy]

Harness should have came with a plug with 2 rca's in it plug those into the sub output of the radio

[@christiancaballero2000]

And to turn on the the amps.?

[@Jcass956]

Ok so im having a hard time i purchased a harness swapped out my stock radio but the kit comes with two connectors. Did you use both or just one

[@joshuameeks6114]

we got an 05 mustang and it already came with this exact radio in it

[@jptheinstallguy]

Awesome

[@rileybothof3782]

Yo what is the stereo called

[@Nunya310]

So do I have to buy any new plugs or harnesses? Mine already had an aftermarket pioneer in it. Just got in a wreck yesterday (not my fault) and coffee went all over that mf… 🤦‍♂️ bout to out a kenwood in it tho it not near that nice lol

[@rubend.rodriguezjr.530]

Hey bro could you share the link where you bought your radio? Does it have Bluetooth for iPhones?

[@Johnny_Stein]

Bro you oughta wash that console up while you got it out.. looking little grungy. 🥴

[@jcsgaragejohnc.5027]

Great video, question Sir, would a pioneer DXT-S4069BT Fit in my 2002 Honda Civic lx, TY

[@rubend.rodriguezjr.530]

Are you able to change the color of the radio? What options does it have?

[@jptheinstallguy]

yup pretty much has every color in the spectrum except black.

[@sancioramos1987]

do the amps still work ?

[@thomaspowis418]

@JPtheinstallguy, I'm confused the stereo has 3 plugs in it however all the harnesses only have 2 do you just ignore the third plug?

[@jptheinstallguy]

yes you wont use it

[@coachkane7139]

How does it sound fam? I have a 2008 Stang, I put a JVC 7” screen in & it sounds like crap. The voice sounds muffled, bass seems to rattle some, too much bass, sound is crappy. The factory shaiker radio makes the same speakers sound crystal clear.

[@jptheinstallguy]

It sounded really good. You might have to play around with the eq

[@ironsave3201]

Nice instructions; I won’t throw my panels though 😂

[@markuservin]

Looking at the setup, off Amazon I ordered the dash kit and wire harness. I will find a radio of course. But is there anything else you bought besides those 3 things for your setup?

[@jptheinstallguy]

Nope dashkit wire harness and radio and your good to go. Now if your car has steering wheel controls then you need the module for that but if not thats it

[@CC2755]

Does the factory stereo have pre-outs?

[@tltanslegacyxd7181]

Hey dude, nice vid. Do I need some special Adapters for changing Radios im Mustang?

[@YellowMCG]

no

[@Nunya310]

@@YellowMCGty

[@dougcrum943]

Thank you.

[@prior242]

Excellent Video... BOOM (LOL)

[@jptheinstallguy]

Thanks man

[@bradwoods371]

Some one help me, i need to wire my radio to the fuse box to get power

[@jptheinstallguy]

That's not right you might just want to check your fuses

[@wl6279]

dang boy it's nasty in there lol good grief

[@CallMe_Schmuck]

You wouldn't have to take that first trim piece off if you learn how to drive a manual .-.

[@Awol-YT]

It’s basically the same with a manual?

[@CallMe_Schmuck]

@@Awol-YT this was 6 months ago, it was a joke bud.

[@CallMe_Schmuck]

@@Awol-YT But no it was actually easier to come out with the manual shifter knob, rather than having the big ass gear shifter the automatic has, but it was mainly a joke.