2008 Ford Escape Hybrid no crank no start ignition switch fix under 25 minutes

[@EvanMcCune-gp2lk]

Bought the piece for $55 it took me 20 minutes to install. Can’t thank you enough for this video - saved me over $800! Awesome

[@mikeverburg]

I found the part for $32 and in stalled it in about 20min. THANK YOU FOR THE VIDEO AND INFO!!! YOU MADE IT SUPER EASY FOR ME.

[@shavellemcdonald5158]

Did it work for you?? N where??

[@mikeverburg]

@@shavellemcdonald5158 Yes, it has worked perfectly.

[@erikbertaud8327]

DUDE!!! You TOTALLY saved me AT LEAST a hundy!!! The parts store dude ordered me a $150.00 starter, and since that was NOT the problem... Yeah... THANK YOU MY MAN!!!

[@JonathanJiang1]

dude I glad it work out. I hate wasting money as well.

[@FishingLuhrs]

Thanks for the video. Fixed it for $23 and it took no time at all (much easier with both hands) You saved me time and money and maybe even stranded. I owe you a beer!

[@JonathanJiang1]

glad it work for you. I had comment from some people that it didn't work.

[@pgruntz]

This worked for me!!!!! I still have to push in the key and it's not perfect but I can start my car in the first try, before it would take me upwards of 100 times to start it. It's kinda like the way it was 3 years ago. Thanks for the video!!!!!

[@JonathanJiang1]

same with me, push in a little but it work. I fine with that. glad it help out

[@CloutTheGoat]

put tape on the lock cylinder there a video out on it also check the comments i replied to a very helpful one

[@grandtheftaudio4541]

Thanks so much for this video. I just changed mine and it worked perfectly. Your descriptions matched exactly my problem and your video gave me the confidence to pull this off.

[@abeldiaz2419]

I just did this on my 2008 and it worked perfect "you are a life saver"

[@ivanborruel]

It works! For the people that say that it doesn't work, you must replace the entire part.

[@JonathanJiang1]

oh well, I didn't replace the entire thing, just that small part.

[@ivanborruel]

@@JonathanJiang1 I replace the part showed in this video and the car starts but you have to push all the way in the key. But I can live with that, my previous Ford escape went 3 year with that problem (where you have to put the key all the way in) with no other problems. Thank you very much for uploading this, you saved my weekend.

[@JonathanJiang1]

@@ivanborruel yeah same, I have to push the key a little further in as well but I fine with it as long it start

[@ivanborruel]

@@JonathanJiang1 yeah, I didn't know that I just can replace that module and not the whole part.

[@JonathanJiang1]

@@ivanborruel yeah, but is great that it work. save time and money. I think the parts have life time warranty too. so next time if it fails, I just bring back to O'Reilly and get a new one.

[@benjaminmangroo156]

I love you so much, fixed my car

[@nayshawnrichardson2753]

Thanks Man! Wish i can send you a thank you card or something! saved me an easy couple hundred dollars.

[@pimptrool]

Thank you I will be using this

[@Joeypopshot]

This same thing happened to me & I went & bought the part (got mine for $25) & did like you and it started right up no problems. Now I'm just trying to get the plastic cover parts back on the steering wheel haha. Easy to remove but a bitch to get back on. But yea, thanks bro!

[@juanaviles3314]

Lo ise y me funciono thanks for the video

[@fd9431]

Thks for posting the vid. Good info.

[@JonathanJiang1]

thank you for the like

[@carlosbanegas7577]

THANK VERY MOCH

[@Lalasmom4life]

🤞🏽this works for me 😃

[@JonathanJiang1]

glad it work

[@Lalasmom4life]

@@JonathanJiang1 I’m 🤞🏽(crossing fingers, hoping) it works.

[@BrennanKurtela]

Whats the name of the part and was your HV battery likely dead too? Im not sure if its this or my HV battery is drained from sitting too long. 2008

[@TimHammett1964]

I bought one on Amazon for $23.00 but it didn't help. I returned it for another one and that one DIDN'T work either!! I put the old one in both times and it will start every now and then but the problem won't fixed. It's not hard to change the part either but you have to make sure that's really the problem. I'm going to have to try buying the part of the local auto part store and see if their parts work better. Fingers crossed.

[@saile123]

This might be the problem: kzbin.info/www/bejne/q3fWkHeuj7Ocpac

[@TimHammett1964]

@@saile123 I fixed it for less then $20 using this: kzbin.info/www/bejne/sJjYomNpgr2BZtE

[@noegarcia522]

In my experience that doesn't work after a week I had the same problem again and I've already changed that part every 4 months

[@peterdoud-rr8pt]

Hi this is Peter and I did installed key switch and just start key but seem not work ?? Starter ???

[@Joeypopshot]

Im glad i didnt take the metal part out and start grinding it. That would have gotten real messy for me 😂😂😂

[@mothnaalzouabi7121]

What p0316 code? Escape Hybrid 2008

[@EM-cj7tu]

Did u have to reprogram the key after that

[@JonathanJiang1]

no

[@EM-cj7tu]

@@JonathanJiang1 bro all I gotta say is u saved me. I've had to jam my key in hard and it would start only half the time. I watch ur vid 20 mins ago and works perfectly fine now!! 👍👍👍👍

[@georgediaz5293]

You don't need to remove the power steering wheel

[@聆听音乐-r2y]

你好！请问可以咨询一些关于AT205的问题吗？谢谢

[@JonathanJiang1]

yes

[@felipemayaizurieta2596]

Regards. what is the spare part code? is it different with the car that is not hybrid? Gracias

[@JonathanJiang1]

the parts that I use is cs804 ignition switch. I don't know if is the same with non hybrid but personally I think is the same

[@DavidMartinez-td8in]

What’s the name of the piece you changed?

[@JonathanJiang1]

Ignition switch www.carparts.com/details/Ford/Escape/Replacement/2001-2014/REPF506205.html?TID=gglpla&origin=pla&gclsrc=aw.ds&&gclid=EAIaIQobChMImsP_ns7i6gIVzz2tBh2gsgkUEAQYAyABEgJD8_D_BwE www.autozone.com/batteries-starting-and-charging/ignition-switch/ford/escape

[@DavidMartinez-td8in]

Thank you!

[@DavidMartinez-td8in]

My car stop working this afternoon, I try everything, so I guess it’s time to change this piece, thank you sir!

[@JonathanJiang1]

@@DavidMartinez-td8in yep, I promise that thing is the problem. guarantee fix

[@DavidMartinez-td8in]

I didn’t work:(

[@only1cres]

It worked for 1 day, and now doing the same thing, won't start

[@JonathanJiang1]

that weird, I haven't have this problem anymore after changing it. maybe try having different brand. I know there are a few different companies that made the same parts

[@cailiyang2104]

你好， 你用几号的螺丝帽把铜色的螺丝弄下来，我也是有一个是铜色的螺丝

[@JonathanJiang1]

我认为是8毫米插座

[@Mack_Dingo]

Your camera movement is dizzying😵‍💫

[@JonathanJiang1]

Sorry yeah, I been told by my coworker as well

[@michaelmoseley7566]

I'm sorry my dude but that's not fixed.

[@JonathanJiang1]

it work for my and currently still working.

[@phongkhotsombath8508]

Better you need keys

[@JonathanJiang1]

what did you mean by "you need keys"?

[@JuanyJuanes]

Dude get to the point

[@joeistheg.o.a.t8456]

Lesson learned! Change the whole module for $100

[@tommytwotoes3880]

Just do it. You take forever trying to explain things that don't need explaining.