2008 Hyundai Elantra Timing belt replacement and service.

I apologize for the poor camera work.

[@TheShadeTreeFixitMan]

You just convinced me that I don't want to do this job at home. Good on you, Ziggy.

[@ziggassedup]

It's pretty easy George...Even without a hoist and with a bad back...And the best thing is there's no special tools needed...Cheers mate.

[@RustyGlovebox]

That was a lot to do at one time but it has been a good car so it has earned it. Great job ZIG on the repairs and maintenance.

[@ziggassedup]

Thanks Lloyd...Hyundai really picked up their game...A pretty good job for a mornings work.

[@coltonismael7042]

instaBlaster...

[@ggme4682]

WOW.... I love everything about this video, INCLUDING the camera work....Thank you, thank you!!

[@ziggassedup]

Thank you....Glad you enjoyed it!

[@Buckswoodshop]

Have to have lots of knowledge and experience to tackle a job like that. Nice work.

[@ziggassedup]

Thank you sir but it's not that difficult in the grand scale of things.

[@rockerpat1085]

100 percent with you on not touching a seal that's not leaking, jus5 don't do it!!! Nice easy good paying job you had there Ziggy. Got a Land Rover 5.0L timing chain and guides going on. What a crazy job it's being. I'm already got 300 dollars in special tools. Good job on the service job!!! Keep Rocking it out Down Under!!!

[@ziggassedup]

My opinion is that a factory part that is performing well is better than a new aftermarket part hands down...Land Rovers are a piece of shit to work on and to drive...Personal opinion....Cheers Pat.

[@michelebeck4311]

@@ziggassedup anything the pomes touch is a f##k up not just land rover!

[@bubbzification]

Bubbz and the TARDSQUAD was here🤘🏻😎🤘🏻

[@ziggassedup]

I see ya.

[@curiosity2314]

Great overview and some good tips. I'm Ok with marks on the belt for a double check. Who knows it might have been a Hyundai tech in training. Spot on with the camera work.

[@ziggassedup]

Thank you sir.

[@closertothetruth9209]

Top job , i like the water pump pulley trick , now i feel like an idiot like why didnt i take the time to think about it and do the same. the timing belt tensioner has a nice adjusting mechanism. the spark plug tricks are good too , so i wasted money on a tools when i couldve used fuel hose LOL.

[@ziggassedup]

A few more tricks up my sleeve.

[@Badgertronix]

Nice job Zig. Hyundais aren't too bad these days

[@ziggassedup]

Good value and reliability if they get looked after..Cheers Johno.

[@TheWreckingYard]

Good stuff Ziggy

[@ziggassedup]

Thanks Ron.

[@CJ-dx5mc]

Nice mate. Now I'm off to do my i30 FD.

[@ziggassedup]

Cheers mate.

[@phillipminor2690]

My water pump is making a weird noise. I thought was the belt and remove then tight again, but still making it. When I push gas noise goes away, when I stop or an idling it make the noise. I used a stetoscope and I hear the noise by the water pump bearing, but the car is not getting hot. Everything is working fine.

[@ziggassedup]

If the pump bearing is noisy then it won't be long before it begins to leak and possibly fail to the point of the belt failing and you don't want that...Cheers Phillip.

[@irisbaez1972]

@@ziggassedup Yeah, it happened to me as well. I replace everything brand new. My water pump was only 50K miles old, and I don't think it was OEM. Now the car running well. no more noise, so it was the pump.

[@MegredyPhotoStudio]

I want to do this on my coupe 1.6L . Heard that the engine are similar. But some guys told me not to try without a locking kit, as I will never be able to sync the belt on a dohc engine using the marks only. Now I think again going for it...

[@ziggassedup]

No locking kit needed...As a matter of fact I've done hundreds of timing belt replacements and never used a locking kit 'tho there are some engines that do require them if you remove the cam and crank gears because they don't have a keyway in them to align the gears...You'll be right mate.

[@MegredyPhotoStudio]

@@ziggassedup thanks mate!

[@reeffaintas]

Where did you get the TB kit and what's the cost ??

[@ziggassedup]

Sorry I can't recall the cost...We bought the kit from our local spare parts shop...Cheers mate.

[@MissouriOldTimer]

luckily I never got involved in changing a timing belt on one of those sideways engines, the Subaru is actually pretty simple.

[@ziggassedup]

Subies are one of the easiest to do a belt change...If I did 3 of them daily I'd be happy.

[@jamesjorgenson3679]

Why do some mechanics need to throw parts into table rather than set them down?

[@ziggassedup]

Only some.?.!

[@JosueTM300]

Hello, great information on to replace the timing belt. I have the same car but the check engine light keeps coming on and it was giving me the code p0011 saying "Replace oil control valve. However, it's the belt from the mechanic shop I took it twice and they were trying to rip me off of $800. I could not afford the repair. I still have the light on but It must be taken care of immediately. I have a gadget called "FIXD" and it's been giving me the same diagnosis. Do you have the information quotes of how much are the parts and where could I buy them? I was thinking of replace the parts. So I wont have to spend money on a mechanic. I know it takes a lot of work but I'd rather fix this issue on my own.

[@ziggassedup]

Check the intake cam timing...You didn't have the code before you changed the belt right.?...

[@JosueTM300]

@@ziggassedup The timing belt was already changed before. But the diagnostics says it over-advanced bank 1. I still have the check engine light on. I need to change the correct belt.

[@ziggassedup]

@@JosueTM300 Pull the top cover off and check the cam timing for the intake cam...If the belt was incorrect the engine wouldn't run.

[@marksponge9852]

All done in 47 minutes. Customer will be happy..lol

[@ziggassedup]

LOL...About 3 hours mate.

[@bradleypetersen241]

That belt still looked new

[@ziggassedup]

Looks can be deceiving. ..That's what the porcupine said when he climbed off tscrubbing brush.

[@bradleypetersen241]

@@ziggassedup I have a 1999 Hyundai Elantra and I out 140k on my last belt.

[@WallysPlace66]

Well if I ever buy a Hyundai I'll know how to do that job.

[@ziggassedup]

You certainly could Ronnie.

[@fynn421]

Spannrolle falsche justiert. wenn man keine ahnung hat sollte man das nicht alleine machen.

[@ziggassedup]

What.?