I found the video here to look at the parts installation. That little motor is a bugger to get in- worth a note- there is a small circular indentation where cog from the motor inserts into. IF you look at that with a flashlight- guiding the motor into position is a lot easier. It only goes in one way, but knowing when to push the motor to align with that circular plastic part of the housing and the 3 prongs- will help make it A LOT easier. Thank you for posting this. With all the details, total time to install new fan motor and new divertor motor was about 1.5 hours total. Plus 20 mins to watch the video 3x. LOL.
@OsamaBeenHarrisАй бұрын
This was extremely helpful and I cannot thank you enough. For anyone wondering, it works on a 2007 rabbit
@sfseals3 жыл бұрын
thanks for this. i just finished the job on my gf’s 2008 Jetta SE, and found your video quite helpful. was a bit intimidated at first but was not going to pay the $900 dealer estimate.($215 for the part and 3 hours labor.) getting the glove box to re-seat was the hardest part. she is delighted to no longer hear that awful noise at start-up and in reverse!
@darrinbranson13573 ай бұрын
Thanks for posting this video. I have a 2008 Jetta as well. Got er done today. No more buzz. 2 hrs and $10 bucks. I had a booger of a time getting the new motor on. After studying the old one and new one, I noticed in the closed position the gear on the new one needed to be just was smidge open to fit correctly. So I plugged the new one in, turn the car on, opened it all the way, then closed it and turn the car off right at the point where I needed the gear to be.
@JW-if5fu5 жыл бұрын
You are the MAN!! My ‘07 Wolfsburg Jetta has been doing this for a few years. So annoying!! VW dealership wanted like $800 to fix it. I can’t WAIT to fix it myself! Thank you so much for posting this vid! Very well done, sir! 👏👏👏👏✊❤️
@axl24027211 ай бұрын
Thanky for perfect job, Ted! Just fix it on my old Jetta MK5, 1.6, 2008. Wonderful explanation and very usefull video even for guy like me. This was the first time I heading to do it myself . The dealership offers me 950 EUR and appointment six month from now. Thanks to you I did it for 2.5 hours and it cost me 39 EUR for bying recirculation servo motor. Greetings
@David-du6bf4 жыл бұрын
Thanks for his video. I had the same problem and I didn’t know how fixed, I’m proud myself because after watch your video I fix my car myself thanks
@marcoscuevas-flores288810 ай бұрын
thanks man, i was stressing out not knowing what that loud noise was, now i get to save some $$ and learn how to do it myself ! dealership was going to rip my pockets
@marieleona795 жыл бұрын
Ours just went out😔 and thank you for making this video I'm going to do it myself🙆♀️😄
@alexlesage5 жыл бұрын
Thanks! Mine has been on for a few months now and it is driving me mad. I thought the whole dash needed to be removed. Glad that's not the case. Although I have a Rabbit, i think it should be the same. Thanks again!
@ccruz44935 жыл бұрын
Oh man thank you so much for the vid this issue has been driving crazy for few months. I'll go ahead and replace the parts.
@marieleona794 жыл бұрын
Once again thank👍you😊for making this video I just replaced my motor And I done it all by myself thank you😁👍
@hardcorsaratoga01305 ай бұрын
THANKS YOU MADE MY DAY WORKS LIKE A CHARME
@Acedi3 жыл бұрын
Thanks a lot Ted! For anyone who has the same issue and wants to save a few bucks: I was able to fix my motor by opening the recirclulation motor's plastic casing and adding few layers of duct tape between the casing and actual motor which allows the worn plastic gears inside to connect again. (Please be aware that if you add too many layers the motor might not be able to turn all the way or at all.)
@nebstan6895 Жыл бұрын
I opened mine cleaned it well and greased it, it looked just stuck. Made it back but it turns the wheel only in one direction and still theres that stuck noise altough motor works, im comfused. Should that motor turn in both sides?
@tonyharris2303 жыл бұрын
Also fits some Skoda, Ford Mustang SEAT other fords and Vauxhall/opel/GM meriva 1 st generation, you can also buy just the motor using the BOSCH part number from the label inside the unit, around 6 euro's from Germany. A lot of these have 2 wire, others have 5 wires, either can be used on the 2 wire, but if yours is 5 wire you must use 5 wire, 5 wire are I think for climate control as the extra 3 prongs go to a sensor that sends info about exact position to air con/climate control unit. The cog simply pulls out and that is how it is able to be used on so many different cars. These pack up as the 2 wire one powers in the direction requested ALL the time the ignition is on, it simply reverses current to achieve each direction, the lecky motor is a doddle to fit no soldering simply pushes into place even the contacts on the end. On my meriva it is 4 screws on glovebox, then 2 screws on unit to take off literally 5 minutes, 2 screws hold it on while 3rd hole locates over a peg so it is in the right position
@Starburstguy21 күн бұрын
Thanks for the video. I was able to replace mine, but it took me a good hour and 15 mins or so. The most tedious part was installing the new motor. Took me a while to get to slide into place. The only thing I can’t figure out is why doesn’t the motor kick in on the new replacement when you turn on the car, but with the old motor, it kicked in as soon as you turned on the car, go into reverse or push the recirculating button on the dash panel. With the new motor, these self rotating modes are non existent. I wonder why?🙄
@wimhoveling15313 жыл бұрын
Thanks a million, great video made my life a lot easier.
@aristotlebustos14312 жыл бұрын
This guy is awesome, save me a lot of money...👍👍
@Tiago983 жыл бұрын
Nice job and many thanks to whoever made this video possible...
@TuMadreWasHere5 жыл бұрын
Nice video. Mines been on for so long I just got used to it. Thinking about doing this though.
@WrenB1114 жыл бұрын
Thanks for the video, I just ordered my part
@chewbacag9145 жыл бұрын
Very good video! I have the exact same problem and decided to order the part and hope to replace it tomorrow. Aside from these little types of annoyances. Are you happy with you 2008 VW Jetta? How many miles do you have on it? Have you experienced any transmission issues?
@andrewm.92605 жыл бұрын
Thanks for saving me $500!!
@alealbert46863 жыл бұрын
Thanks so match for share it more easy like was look liked thanks and cheers from east coast ...
@sam77almasri70 Жыл бұрын
Thank you for this useful video
@gr_excel7 ай бұрын
My scanner says "01272 - Positioning Motor for Central Flap (V70)", is it this one?
@gladson93433 жыл бұрын
Obrigado man!!! Thanks you for video
@chato5552 жыл бұрын
Nice job you done here! One question if you know, perhaps. Heat exchange and middle (central) ventilation not working (left and right are working normal). Connected OBD2 port and scanned with carista and it says that i have 4 faults in AC modules. 4 faults in the same time?? Whats the odd with that? 01809 - Actuator for temperature flap on the left of (V158) 01810 - Actuating Motor for Temperature Flap: Right (V159) 01272 - Positioning Motor for Central Flap (V70) 01274 - Air Flow Flap Positioning Motor (V71) Whats the odd that 4 motors bured at once? It is a small fortune and pain in the a**** to replace all that! Is there maybe something else got off which cause those 4 not runing...if you know..maybe some kind of fuse or...?
@visionrecordsduendetepa91054 жыл бұрын
Very thankful with your help.....
@Moto-xe3kw3 жыл бұрын
About to tackle this, let’s get it.
@captainpoptarts Жыл бұрын
Great video, but I got stuck reinstalling the plastic piece that goes over the actuator and the other electrical components won't go all the way in. Any ideas?
@captainpoptarts2 ай бұрын
1 year later and I just realized I need to do this again. Great video again
@GAMINGINMYCAR4 жыл бұрын
Thanks bro love you for that
@MrJamz745 жыл бұрын
Hi does this control temperature too? I have a golf mk5 1.9tdi and my heaters are cold.when I adjust the temp dial I can only hear this working upto about 1/5 of the dial. Anything after that there is no sound therefore I'm assuming it's this part?
@zennx5 жыл бұрын
I don't think it controls temperature. It wasn't working for about a year in my car and I was still able to adjust between cold and hot. The only thing that wouldn't work was the re-circulation, so some mornings it would take a while to get the heat going. I guess in a way it has a little bit to do with it.
@samermamd5 жыл бұрын
Hi my friend I have a problem with the Passat CC. When running hot air the driver is only opened hot either the rest of the slots inside the car will be cold so my fain will be my problem. And thank you very much
@MrVidas0013 жыл бұрын
Hi my mk5 golf but won'ts takes off, did any bolt holding in back?
@autodetailinggarageofcapec42373 жыл бұрын
good job. thanks!!
@swaynesmith82022 жыл бұрын
Thanks for this
@SoundGuyDavo4 жыл бұрын
Can I access the Blend Door while I’m in there, or is more access required / disassembling the dash more. I have the same issue and sounds with the Recirc Door or Motor and I also have no control of temperature; it’s stuck full hot.
@tinareitz-lee29703 жыл бұрын
SoundGuy, did you get your temp fixed? If so, how did you do it? I’m suspecting thats my issue in an ‘07 Jetta that my daughter is learning how to drive on.
@kamspork84084 жыл бұрын
thanks man, there is no fricking way I'm doing that
@martinhermoso31214 жыл бұрын
Hola tengo VW Touran tdi 140cv 2006 y no tengo aire caliente frio si tambien cuando tendria que salir caliente
@predatorof18352 жыл бұрын
Nice
@diegocabral2092 жыл бұрын
thank you
@paddymccune85123 жыл бұрын
Thanks, I thought it was a spirit .
@benopit54783 жыл бұрын
Man, this is 2 pin ? 5 pin? Please write me, this motor with chip?
@user-bp3ec4jo9o4 жыл бұрын
The one who does not get me hot air from the front of the passenger is this replacement or the motor ??? Does anyone know?
@FF-lu1su2 жыл бұрын
No, it’s a different motor
@princesheriffadeoti43353 жыл бұрын
Thank you so much , how can get it I search for it on Amazon no results
@tonyharris2303 жыл бұрын
They are definitely on amazon for around $20, I found at least 5 today NEW.
@fabianbauza44483 жыл бұрын
@@tonyharris230 how do i search it ?
@tonyharris2303 жыл бұрын
@@fabianbauza4448 HVAC blend door motor just put that into the search box, you can buy the motor on ebay.de(german) by putting in BOSCH 1 397 220 467 into the search box, this is the actual electric motor, certainly the one used in mine and other vw ones I have seen, about 15 euro delivered for brand new motor, very easy to fit, I just broke off the lock tabs on housing and used some tape to hold cover on after replacing my motor
@fabianbauza44483 жыл бұрын
@@tonyharris230 thanks i cant buy from german ebay from my country, but i just bought it from ebay usa or amazon i dont remember. Hvac actuator
@tonyharris2303 жыл бұрын
@@fabianbauza4448 HVAC is short for Heating, Ventilation, Air Conditioning
@bryanmestanza33 жыл бұрын
Where the desert button
@TheRealDealOfficial Жыл бұрын
I fixed it by shimming the motor
@dnrvision Жыл бұрын
😂😂😂 mine does it too idc to much about it
@ibrahimkara7485 жыл бұрын
hi, I have same problem link: my car, Air circulation kzbin.info/www/bejne/hZrHnKatec6NbsU car engine start: not Working air circulation system , car engine stop normal working air circulation system if u know solutions , help me pls
@zennx5 жыл бұрын
Looks like your re-circulation motor is working and opening/closing the flap. I'm not sure what that galloping sound is, but I have heard something similar before in my car. Not sure what causes that or if it's related.