2009-2014 Ford f150 fuel pump control module replacement (no start) (intermittent starting) P0627

Рет қаралды 25,529

Күн бұрын

⁠2009,2010,2011,2012,2013,2014 ford f150 fuel pump module.
During my diagnostic found no start and the fuel pump module failed, I first found the wiring diagram to confirm my results and after replacing the module truck fired right up no issues
P0627
#ford #mobilemechanic #ford150 #mechanic #fuelpump

Пікірлер: 40

@disfish8248 8 ай бұрын

You saved the day my man. I can't thank you enough for sharing this. You saved me 200 bucks. God bless!

@garycook8633 4 ай бұрын

2014 still 150 Same problem ges what not the gas pump it was a starter going bad Ya the starter controls the gas pump ,, saved me 800 dollars by a good mechanic

@mlr06121974 8 ай бұрын

Very excellent work on this video. I’m very happy you shared it cause there’s not a lot of information on testing them.

@aleksandrshylo888 6 ай бұрын

Thanks for the video without any further diagnoses I replaced the module and my truck started right up.

@larryblood6481 8 ай бұрын

Great job explaining your process 👍😁

@TheNeuteredCat1 7 ай бұрын

Thank you sir. I am gonna install tomorrow and see if this fixes it. Also fantastic for adding the part # into the video. Fr so helpfull

@TheNeuteredCat1 7 ай бұрын

Worked and fixed! Thank you sir very much

@TheNeuteredCat1 7 ай бұрын

Worked and fixed! Thank you sir very much

@Gmoney201201 8 ай бұрын

Thank you so much. I was able to check and verify power at the plug. So bought a new fuel pump module. Popped it in and started right up! Saved me a tow and a shop bill. Thanks again.

@marcushunter1406 21 күн бұрын

Nice work

@alphaturd6922 4 ай бұрын

I changed fuel pump on my 09 f150 xlt 5.4 started and died now i got crank no start it sounds like im getting power to the pump could it be my pump module?

@masont1527 9 ай бұрын

How did you check the power coming out of the module?

@ollieonwheels1 9 ай бұрын

Hello I used a multi meter and some back probing connectors to check the signal

@bertranddupuis7327 4 ай бұрын

Excellent !

@stevenn4393 7 ай бұрын

My fuse #27 is melted. Cranks but no start. I’ll try this module.

@chicagobearsfan2334 4 ай бұрын

if its melted you need to use a tsb relocate kit to relocate to #70

@jerrykennedy3187 8 күн бұрын

My fuse #27 melted yesterday what was wrong with your truck

@jerrykennedy3187 8 күн бұрын

@chicagobearsfan2334 have you had this problem my #27 melted yesterday

@tbnrfan6965 3 ай бұрын

Replacing the AC compressor and the orifice

@armandomaldonado1559 4 ай бұрын

It's gonna be gas it's not diesel correct

@NONEOFYOURBUSINESS-z8h 8 ай бұрын

27 needs a 20 amp in it

@Char-rc2qf 8 ай бұрын

He did not comment if it was a no crank or no start if intermittent okay

@ollieonwheels1 8 ай бұрын

It was a crank no start added starter fluid in intake tube started right up

@lruiz88 11 ай бұрын

So would u hear ur pump turn on when u turned the key before u replaced it?

@ollieonwheels1 11 ай бұрын

No this part actually sends 12 volts to the fuel pump, I had my 12 bolts coming in to relay but not going out to fuel pump. Thanks for watching.

@garylee6037 Ай бұрын

My Ford F150 5.0L truck will start and run for about ten minutes then shut off and no re start because not getting fuel. I let it sit overnight and then it will start perfectly fine and do the same thing.

@juli7970 2 ай бұрын

Thanks for the informative vid! Appreciate the schematics and explanations, good job!

@rickyphillips7469 4 ай бұрын

Awesome video! This was the fix for mine 2013 f150 with only 80k miles! Mine had the exact same symptoms as in this video. Went straight to the parts store and they had ot in stock. Took me about 20 minutes to change it out and it started right up! Way to go saving me tons of time and money! Thanks good Sir

@rafaelglez640 10 ай бұрын

This video is the only one on the entire internet that has helped me precisely with my situation. Literally, this morning I just bought a new fuel pump, and tomorrow I was going to install it. But after watching this video just now, I'm looking for this control module to replace it to see if it's the cause of the problem. Thank You! Have Nice day. Greetings from Ags, México.

@ollieonwheels1 10 ай бұрын

Yes they are common to fail but have to double check just to confirm. Thanks for watching

@richpetrillo8456 4 ай бұрын

Excellent video. Well explained and to the point. Thank you

@yanceyrobertson2414 7 ай бұрын

I wish I had your skill of understanding the mysterious art of diagnosing issues with a multi-meter. You're brilliant. I will be paying $300 for this work at the Ford dealership later today. Seems a bit steep after watching this. You make it look easy but it's not. Great video.

@ollieonwheels1 7 ай бұрын

It comes with time and practice a lot of newer cars i find myself having to check wiring and voltage to confirm issues can be time consuming for sure.