2009 Toyota Corolla Transmission Filter Change

[@runedit9044]

Thanks for the video , im gonna try to do it myself tomorrow. I bought a 2009 toy corolla dirt cheap. Ive got it running great and almost done with all the maintenance , just from watching KZbin. Im not very mechanical but i pulled it off , thanks guys !

[@thomasbriansavingmoney]

perfect, its all about saving money, thanks for watching.

[@richardhollinshead7081]

Great video man! Very concise, straight to the point and very detailed. I like that you pinged the bolt holes on the pan.

[@thepinkflamingos5930]

Corolla started shifting rough immediately knew I was low and your video is the go too for my 80K 2011

[@HillbillyRednecking]

Using a inch pound torque wrench to tighten the transmission pan gave me a little extra piece of mind, knowing I got the pan tightened as uniform as possible

[@davidsaldana7174]

What inch pounds did u use to tighten

[@andretigiovaneti7587]

48 inch pounds pan, 84 inch pounds filter.

[@bockenfels2021]

Or divide by 12.

[@Reldonator]

You have restored my faith in doing this for the first time on my own. I'll let you know how it goes. Thank you!

[@spencerwade9964]

So....

[@tamalexpert9212]

so?

[@rocket4602]

Sub'd and liked. Wow, great info Thomas.....especially re-installing the trans pan gasket. I've watched many videos on this subject, yet none have spoken in this degree to the gasket procedure. Thanks a million, rocket

[@stanislav9608]

Your tutorial video is one of the best on You tube. Only one advise - please use the rubber gloves when your skin is coming in contact with cancerous substance like used engine and transmission oil. Other than that - your video is perfect

[@gforcecache]

Just finished my 2010 Corolla. Thank you for the video. Couldn't/Wouldn't have done it without you.

[@gforcecache]

AR A lot of oil stays within the transmission. Only put back exactly what you took out or you will overfill. Check the dipstick after you finished.

[@gforcecache]

AR I am not a mechanic so I would not rely on my answers. I have watched several videos that discourage flushes as doing more harm than good.

[@hpiccus]

its close to around four quarts. 3.2 is drain and refill which does not include the filter thats full of oil

[@Rezail_Uhhh]

Yeah that look like oil there..

[@ny1t]

Good video, BUT never climb under a car on a jack. Always use jack stands or such. I personally know of two people that the jack didn't hold the car up. One was killed and the other did damage to his leg.

[@thomasbriansavingmoney]

great info. thanks for watching!

[@johnm4579]

Good info. bro ! got 2011 Toyota corolla with same engine. Also got different amount of fluid, the 3.2 qts. or 3.7 - all depends on if you doing trans oil change only, or with a filter.Toyota says it life time trans oil, but it can't be- mine was as black as it could be.

[@thomasbriansavingmoney]

topping it off and running it and re checking sounds like a must. ha. thanks for watching. and the great comment

[@mikeb6902]

for manufacturers, "life time" fluid simply means the lifetime of the transmission, once the transmission blows up or breaks, thats it.

[@fredkonrath7482]

The video procedure also works for 2008 Yaris, great vid.

[@robertocervantes3347]

Eh mirado otro video y no saben explicar y este video está muy bien explicado con detalle gracias

[@LoveLikeaHurricane]

so you don't have to have a particular order in tightening the pan up? Like how on a wheel you do a cross pattern?

[@cogaussie]

I did mine on the weekend... It drained about 2.5lt from the sump.. So I just replaced that amount.. So, That should be ok? Can't seem to get a clean reading from the dip stick....

[@thewishmastur]

Drained my atf at 180k km and coolant at 190k km. Still running strong.

[@lucassoares9509]

It was your first transmission fluid change at 180 km ? My corolla is 190 km and i am afraid to do that

[@thewishmastur]

Lucas Soares....yes it was the first time doing drain and fill on the atf. No issues.

[@nathanhane1653]

i know this video is old, but what are the torque specs for the three bolts that hold the filter and all the bolts for around the pan? I’m about to do this to my 09 corolla

[@Clearanceman2]

Thanks, I'm going to do this even though they say don't do it after 60,000 miles. But it's popping out of gear into neutral and I'm hoping this helps although I don't know but I got to try.

[@kito1san]

If it's popping out and you have a manuel. It's not the transmission. It's a plastic in the stick. That gets worn out and it's preventing it from staying in gear. You need to get to it from the interior side.

[@notsure605]

Nice tip on the ping, thanks

[@bockenfels2021]

Great vid quick and to the point. 😊 thanks

[@christopherfranklin2356]

Excellent Thomas, perfect for my 2011 Corolla SE, thank you!!

[@MYA76]

hi..i already change transmission filter for 2 times (80k and 160k). Original toyota transmission filter come without oring. I assembled back used oring with new filter. My question.. when used recycle oring can effect oil flow/suction if oring leak?

[@l.l.5274]

Thanks so much for your video! I'm going to try it myself.

[@arqcm]

Great video!!Question: Do you fill with the new fluid using the deep stick tube? Thanks!!

[@MrBottlecapBill]

Ya it's wierd when there is a tranny fluid fill cap on these older models lol. WIth a "full" line and everything.

[@HD-on2eg]

Supposedly you need a special tool for filling the transmission fluid on that model Toyota. What is the special tool and why does it need to be used?

[@rolandomontana1389]

I hit a curve and the oil pan broke and another part that's beside it broke that has something to do with the transmission, does anyone know if its worth repairing the transmission or just the parts that broke...I don't know the name of the part but its like a cylinder part.

[@macuse2008]

Using dirt to clean it. Love it

[@MoonzSocio]

It sucks the oil and absorbs all.

[@Quest4Unknown]

Nice! How bout them canister housings on the oil filters… not so bad when we do it ourselves but 18ft lbs should be what it is tightened too.. got a vid of the seized on canister filter would be helpful to many. Sorry if you did that already as I just subscribed 🤙🏼

[@KennyPoloP]

What do you say if I bought my 2009 Corolla with 72,000 miles and it now has 234,000 miles without ever having changed the transmission fluid, but recently a seal was damaged and it leaked a bit, should I change it or just top it off?

[@kito1san]

I'm with you on the same car with the same mileage. Having some shifting slippage on the first gear. I have an automatic. Thinking of doing this and also flush it as well. Looks like the ATF should be changed every 60k miles. Didn't know that and now it will be in my maintenance.

[@l.l.5274]

What about changing the entire fluid? Shouldn't you drain all the fluid by pumping it out?

[@luisc2466]

What about Manuel transmission for fluid check

[@creeplife2802]

Any torque specs on the valve body, filter, pan?

[@lucaswawryka9635]

Filter drain plug is 31ft lbs, pan bolts are 5 ft lbs....and unlike the video secure them in a cross hatch pattern a la lug nuts to prevent warping the pan

[@calvinma9493]

@@lucaswawryka9635 13 ft-lbs for drain plug?

[@stanislav9608]

@@lucaswawryka9635 36 ft lbs drain plug and 10-15 ft lbs oil pan bolts(19)

[@boydmerriman]

I have been looking all morning for types of transmission fluid, how much, what torque and anything I can get a hold of, and I think I got about as many different answers as I did videos and articles! ;-) I just bought three quarts, just in case I needed that much since most of what I have been reading and watching was around 2-2.5 qts. Now you say three gal...er...quarts, maybe more! (sigh)

[@sikk84mcss]

Do you recomend to do this to a 09 camry,4 cyl,110xxx miles? Never had a trans oil/filter change.

[@dannycool59x49]

YESSSSSSSSSSSSSSS

[@stephencook7337]

Excellent video and HolyCr4P that engine bay looks cleaner than my bedroom 😂

[@zackdigrigoli7823]

Is this video good for a 2013 Corolla?

[@guyva_unito_sree3]

any idea if the trans filter even needs to be changed? can you just do a drain every now and then instead of taking the pan off? didnt look like there was much metal shavings anywhere on the pan.

[@thomasbriansavingmoney]

you must change the filter, because if it plugs, the fluid pressure will not be correct and the transmission will not get the proper amount of fluid. thanks for watching!

[@josuepereira8348]

Does this also go for the S model?

[@never4getmusic349]

thanks for the video, changed my 2009 toyota corolla transmission filter and fluid and now the car makes a winding noise in first gear. Noise gets louder the faster i accelerate in first gear. Also the shift is just a bit rough from first to second. All other gears shift and sound fine. What could be the problem?

[@gabrielkaras1858]

The fluid pressure has changed because the dirty fluid should have been changed sooner. Use Lucas Transmission fix fluid

[@mrbrandonaldana]

Never4getMusic did you ever know what was the problem? i have the same problem

[@somethingsimple5961]

Ik this response is super late but it could be that your transmission fluid was really dirty. Your transmission could be slipping or something like that

[@joeramozz2655]

Great job brother, just bought my 2009 corolla, so I want to do a full time up on it to save a some money.. thanks

[@thomasbriansavingmoney]

perfect, thanks for watching.

[@eddiereyna1155]

I couldn't put the whole 3.7 gallons fluid was coming out of the dipstick

[@stanislav9608]

not gallons, 3.7 quarts.

[@dannylanda1275]

Is the same engine with the 2010 Pontiac vibe? So the procedure is the sameness?

[@MrBottlecapBill]

Yes. The vibe was made by toyota and re-branded for Pontiac. They have the same engines.

[@peterv3122]

This is a great video!

[@brahohendd]

Curious: is it necessary to change transmission filter everytime you change transmission fluid on Corolla (mine is 2007)? I noticed on KZbin vids that some people do it while others skip it

[@thomasbriansavingmoney]

i never skip it, the cost is not that much, and your there. people who do not drop the pan, and flush it are crazy to me. once you do them and realize how not so bad they are, the out come of a new filter, and the response is great. not to mention the stuff your keeping away from the shifting solenoids. people who flush only have something in common. they all believe they just got a bum trans when the clutches finally go. ha ever heard any one saying a job worth doing, is worth doing well. if your not gonna filter the fluid, why change it. might as well leave the old fluid in, because the dirty filter is not gonna let the fluid through weather it is clean or dirty, putting to much pressure on clutches and solenoids. save your self the money in 6 months to a year. change it. thanks for watching.

[@brahohendd]

@@thomasbriansavingmoney thank you for the clarification! I I wondered about the same thing 😁😁

[@Luckingsworth]

To add to the conversation it depends how often you do it. If you are changing tranny fluid rarely like most people, absolutely change it. If you are like me and do a ATF change nearly every time you change the oil every 5k miles or so, I dont bother with the filter each time. Closer to one every 4 changes aka 20k miles. Transmission filters dont work as hard as engine oil filters do. In fact most of the debris not caught by the pans magnet is created in the initial break in period of the transmission. If the filter cant go a solid 20 or 30k miles then the transmission is being damaged and will fail soon.

[@gretelmiller3065]

I have a Toyota Corolla 2012 I’m at 102 k on it.. took it to the mechanic today to do a transmission flush .... he did not advice me to do it instead he change the filter and gasket and put the rest of fluid on transmission .... I’m just very concern did the mechanic did the right thing ??? Thanks a ton

[@thomasbriansavingmoney]

yes, most try to sell you on a flush. do not do a flush on that car. he is a good man. never flush a transmission with 100k only change the fluid and filter. when you flush you remove some of the clutch material between the clutches and cause slipping. again he did the right thing. great question. thanks for watching.

[@gretelmiller3065]

Thank you so much I really appreciate you put me at ease and such a relief to hear 🙂have a great day !

[@hawaii137]

What size is that funnel? I'm trying to find the right size

[@willf5768]

Gallons of trans fluid?

[@99ekcouper]

Put in what came out. Catch the old oil and measure it.

[@xXKYKYXx99]

My 2011 Corolla has never had a transmission oil or transmission filter change, it have 96000 miles, is it safe or wise to change it ?

[@thomasbriansavingmoney]

some Toyota s have a synthetic that is good for a lot more miles, but i have never met a transmission that did not benefit from changing the fluid. some i will not flush, but all i will change. great question. thanks for watching.

[@thomasbriansavingmoney]

safe and wise, but do not do a flush on that one, just change of filter and fluid. thanks for watching.

[@dennisfengcanada]

You should change fluid and firlter asap.

[@mikeb6902]

I did a drain and fill, a month later did it again, a month later did drain/fill and changed the filter

[@soyeldiego4878]

Yikes! Hope the EPA is not watching the cleaning procedure...My 2009 Corolla has over 255,000 miles and need to replace the filter. Thanks for the video.

[@thomasbriansavingmoney]

5 min and 15 sec into the video displays a area that is just for this cleaning. that dirt like a parts washer gets removed and disposed of just like a parts washer. dedicate a area as i have and it is just the same as my parts washer process. all trans pans are done in the same 5 foot by 5 foot area. there is 2x6 around and concrete below the soil. thanks for watching.

[@darring.9161]

Yeah...I know. The Toyota Dealer in my area said it doesn't have a Filter...just a Screen. The Car in this Video is the same...only a 2010 Corolla S. Then the guy behind the counter tried to tell me that if I take the Pan off...it'll cause problems. Great...so how do you clean the Magnets and Screen (if any) of built-up metal debris etc? Wait...I know? They want you to buy a New Tranny or get a Rebuild is the only reason for this. I can't see how taking a Transmission Pan off would cause any problems...unless you're really, really careless or don't put the pan on properly. Go Figure??? This was the Parts Counter telling me this...not a seasoned Mechanic who actually knows the Car inside and out.

[@darring.9161]

It's a good idea for cleaning the Pan...I would imagine that some Kitty Litter would also work pretty well.

[@juanescamilla2834]

You still have old fluid in the converter

[@tanktizzo]

So I am at 84,000 miles and never changed the transmission fluid. A buddy said to keep some of the old because it gets thick over time and add it to the new. He said if you just add all new it can screw things up in your transmission...can you confirm this?

[@thomasbriansavingmoney]

he is correct, but keep in mind that the torque converter will hold about 5-9 quarts that you will not be changing. so yes, and no. if you are not flushing the whole thing and you are just draining whats in the pan, your good. great question!! thanks for watching.

[@salamhayat9671]

Please confirm transaxle model no?

[@jayvee9334]

I have almost have 200000 miles. Not sure if the transmission been changed. But I want change it and the filter. Need your advice should I change it ??

[@thomasbriansavingmoney]

absolutely, i would just to have piece of mind. thanks for watching.

[@oldarkie3880]

A little brake clean and a paper towel is how I cleaned mine. Do not tighten more than 6 ft lbs.

[@ThePoptropical]

Very professional short and to the point love it God Bless keep up the dirt work I meant good work

[@RSHALO1316]

Will be changing the transmission fluid on my 2014 Corolla it says it holds 6.9 quarts for ATF WS fluid …. How come yours is only 3.2 quarts?

[@gwlemus]

RSHALO1316 i have the same year car 2014.let me know how u made out.my friend gas a 2008 and i have replaced that one and it is about 3 qts but it does have a dipstick unlike the 2014 sealed..

[@darring.9161]

Why...because he didn't do a complete flush on the transmission...and I don't recommend it either. When you manually drain the pan, you'll only get about 50-60% Percent of the total amount of fluid in the Tranny. So...you're only going to need about half of the capacity to refill it. If you do this once every 1 or 2 Years, you'll be removing and replacing the old fluid and replenishing it with newer fluid over time. Less likely to run into problems that way! If you're wanting to replace the Filter on the cheap, and don't want to buy a new one? Just take out the old filter and wash it thoroughly with Varsol or another similar cleaning solvent, dry it reasonably well...save the rubber ring and buy yourself a new Pan Gasket in advance. Some guys just use ample amounts of Brake Cleaning Spray to wash out the old filter. They'll still work okay!

[@RSHALO1316]

Sorry for the late respond. I have the 2014 Corolla L which has the transmission fluid dipstick. So looks like just draining the fluid only 3 quarts is required. However, if you take apart the whole transmission fluid pan I think thats when 6.9 quarts of oil will be required. So in conclusion if your planning on only draining and refilling 3 quarts of oil is all you will need. I will recommend you to measure out how much you take out and put back in that much.

[@RSHALO1316]

Thanks for the information. I bought 7 quarts of toyota AFS oil did the drain and fill only 3 quarts drove it 1000 miles did another drain and fill just because i had left over oils.

[@kingofrandomjunk]

Great Video! Thanks!

[@residentevil9894]

Is there an order to tighten the bolts?

[@boydmerriman]

I always thought there was.

[@andretigiovaneti7587]

Does the 2010 also 19 bolt pan?

[@djrickstartv]

great video, question, at what millage did you first change the transmission filter ? and what brand of ATF you using ? what are the symptoms of a dirty filter ?

[@metaldetectingnmore8763]

Use genuine toyota fluid its called world standard atf

[@truettneathery4358]

How about the ATF in the TORQUE CONVERTOR????????????????????

[@Solontire]

@Truett - that’s why this is a change not a flush.......

[@davidsaldana7174]

Have you done a 2017 Toyota Corolla

[@somphothbsiratsamy3748]

You forgot to mention to put the car on neutral while running to get an accurate measure

[@thomasbriansavingmoney]

as long as the engine is running, the front pump is spinning. thanks for watching.

[@BeatenZero]

Thanks dad

[@thomasbriansavingmoney]

Thanks for watching!

[@franciscoramos-di2mu]

Where do i find the cup of power steering oil of a 2009 toyota corolla?

[@thomasbriansavingmoney]

a cup? power steering fluid? i am not sure what your asking, but thanks for watching. if you have a question ask away, i will help if i can, but i am not sure what the question is.

[@mannys9130]

It's electric. There is no power steering pump, lines, or fluid reservoir.

[@BC-uu6iz]

I can see the experience, tks for the info

[@thomasbriansavingmoney]

thanks for watching.

[@chizobavictory1373]

Bless you man

[@lovanveia]

Thank you for your video But if you don’t change completely really doesn’t make a sense! Should be fully flushing.

[@yoyimarti2864]

Awsome video bro...thankx

[@khamphyphimmarath8803]

Hi Thomas I have corolla 2010 I never change filter transmission about 230000 should I change filter now.

[@thomasbriansavingmoney]

i would, in my opinion it will allow the trans to last longer.

[@darring.9161]

At least remove the old one and wash it out with cleaning fluid...make sure you save the rubber gasket ring and get a new gasket for the actual Pan.

[@mannys9130]

Darrin G. Filters are cheap. Cleaning them is not effective and you risk contaminating the clean side of the filter with particles that will damage the valve body.

[@cheejun7719]

Nice tutorial Bro !

[@thomasbriansavingmoney]

thanks for watching chee.

[@ipmann100]

Hi, very nice job sir!!! Can u tell me what model of CVT is?? It is a K 111 or K 311 or K 314 Tanks!!!

[@MrTacoJay]

Not a cvt

[@mikeb6902]

CVTs didnt come on the Corolla until the 2014 model year

[@calebhuckaba812]

What ATF fluid did you use? Is it Toyota specific?

[@thomasbriansavingmoney]

yes it is, be sure you get WS . thanks for watching.

[@dennisfengcanada]

multi vehicle is enough

[@maxcortez2672]

How many miles between fluid and filter change?

[@mannys9130]

Chromatic Aberration Fluid should be changed every 30-40k if you care about the car.

[@pbhssciencedept9140]

Chromatic Aberration

[@juansalomonmedrano6779]

Yque tal si lo publicaran en español

[@esequielpinti9388]

Really nice video.

[@thomasbriansavingmoney]

thank you for watching.

[@jordonstone9057]

Thanks much

[@ThegreatBoso]

Thank you.

[@josefranciscoesquertalaman3827]

Me gustó, buen aporte.

[@thomasbriansavingmoney]

Perfecto, gracias por mirar!

[@thruthfog]

Great video Thanks

[@josuepineda44]

Very nice 👌

[@Walter_ElBrotman]

Buen video

[@royhernandez6528]

Thanks my friend 👍🏼

[@thomasbriansavingmoney]

gracias por ver a mi amigo!

[@chriss4365]

My truck takes 3 gallons so I'm sure this car takes at least one gallon or 4 qts. Totally absurd 19 bolts that's insane my truck has 14 and that's ridiculous.

[@ababner317]

Gallons?

[@argenisnin1005]

Thanks 🙏 thanks 🙏

[@MAGNETIC-COMPASS]

03:28 .. 03:51 .. 05:59 .. 06:32 .. 07:39 👍

[@thomasbriansavingmoney]

thanks for watching.

[@tidoshiaopusunju4270]

Where is power steering fluid

[@nl2520]

Gave you your 666th like. \m/ rock on!

[@videos8601]

Perfect

[@madhoorm66mohamed4]

good job

[@thomasbriansavingmoney]

thanks for watching!

[@z31rider24]

👍👍👍

[@argenisnin1005]

Good

[@tedheavy3441]

Nothing like getting a wet gasket and throwing it on a sandy-dirty floor.

[@nathanielcarreon5634]

3.2 quarts not gallons

[@miguelcango6592]

in the owner manual. says never change the ATF.

[@thomasbriansavingmoney]

hmmm i would need to read that, clean fluid is always important. they sell filters and fluid for it, so maybe its reading something different. thanks for watching

[@mannys9130]

That's because WS is "lifetime" fluid. In reality, WS has a weak additive package and is not synthetic (prone to oxidation at high temp). WS fluid is toast at 60k. You really should change it at 30k.

[@darring.9161]

Sure...they want your business. It's a selling and marketing ploy. ATF does not last a lifetime, and over time it will accumulate microscopic particles, oxides, and metal shavings! Don't want an expensive "Transmission Job" at their Shop? Change your Tranny Fluid every 1 or 2 years or so!

[@ThePoptropical]

You know everything but do you know the easiest way to change wife?

[@MSami-fe6uj]

Sell all your assets, transfer the cash to an offshore account then divorce

[@vtwinaddicted5852]

Great music guy!!!!

[@kbron3250]

nice video but could of done without Quiet Riot and Aerosmith