2010-2015 Camaro SS Granatelli 103mm Throttle Body - Phastek Overview & Phastek Install

[@USGovsOwnersRtheRealEnemy]

All you need is 4 tunes. Which is the most expensive and most inconvenient thing for regular people. But if you have a shop or tuner in the family, you’re good.

[@RobertCornejo]

What size coupler did u order. Im in the same pickle, didnt forsee this. Little help.

[@bowtiegrunt]

So I'm actually in the middle of my build list through you guys and trying to figure out if this throttle body will work with the btr equalizer 3 with it only being 102mm intake

[@GamerDave85]

I have the same intake on my Camaro that is a 102mm will the 103mm still fit on it?

[@PhastekPerformance]

best to stick with a 102mm. www.phastekperformance.com/BBK-Throttle-Body-2010-2011-Camaro-SS-V8-LS3-p/bbk-camaro-throttle-body-102.htm

[@bryanguzman2303]

Do you recommend to get higher cc fuel injectors ? Since there will be more air suction, wont i need bigger injectors? Or just tuning it will be fine?

[@kennethmadan2537]

I’m sorry for the comment being on this video but I figured you guys would see it more than it being on the lowering spring video. I have a 2013 camaro ss and I put on the bmr lowering springs, but now I get a squeaking sound from the front left that does not go away. I believe they called it the radius rod. If you were underneath looking at the driver side, It is the bottom left control arm. Any input would be greatly appreciated. Look forward to purchasing from you guys again.

[@PhastekPerformance]

Its not a problem. Post a comment where you feel it is needed and we will do our best to get back to it. My suggestion would be to double check all the bolts holding everything together. I have come across various noises and I usually find something was just not tight enough or just needed to be reset, loosened and tightened.

[@kennethmadan2537]

@@PhastekPerformance I tried that and thought maybe putting wd40 on the bushings would help but it only stops it for like a day or 2. I have retried this a few times and I’m positive nothing is loose. I have looked up something called reclocking the control arms but have no idea how that works.

[@Baktuthamoney]

Yessir that’s goin to be my next mod

[@ROBSBLAZER]

Do you sell the intake coupler also?

[@DARTHNEWS]

Awesome 💯🔥

[@mattcross428]

What is that on upside down

[@Spoder_Man]

He literally says why it’s upside down my guy 🤔🤦‍♂️ so it doesn’t hit the belt

[@TaldrenDR]

I haven't even heard of 103mm before. As far as I knew the standard was 102mm. The snow water methanol injection kit for the Camaro has a 102mm spacer :(

[@SuperThudor]

Does this fit a stock 2011 SS automatic L99?

[@PhastekPerformance]

The throttle body would bolt on the factory manifold but the factory manifold intake port is small when compared to the 103mm opening.

[@SuperThudor]

@@PhastekPerformance so I have the CAI blackhawk on my stock L99 if I get this do I need that blue coupler shown?

[@PhastekPerformance]

@@SuperThudor The coupler that comes with your intake might work, it just depends on if you can fit it over the Granatelli throttle body. If it does not work, then you would need a larger coupler to account for the larger components.

[@mattcross428]

I should waited 15 seconds ha ha

[@conf6k87]

Hey man I’ve been wanting a supercharger for my camaro what kind of supercharger is that in the video ??

[@PhastekPerformance]

The car used for this video did not have a supercharger installed.

[@conf6k87]

@@PhastekPerformance what’s that thing in the middle that says fast vsxR

[@PhastekPerformance]

That is the FAST intake manifold. Here is a link for that product. www.phastekperformance.com/2010-Camaro-SS-FAST-102mm-Intake-Manifold-146102-p/fast-camaro-lsxr-146102b.htm

[@olveramelinda]

@@PhastekPerformance work with whipple ? Just received the whipple.

[@mr2hard2see]

@@olveramelinda yes will work with whipple. I’m dropping a 103mm Tb with my supercharger install.

[@Macaron-tv-50]

You made them register a channel.

[@mikeec6147]

Is it electric?

[@PhastekPerformance]

Yes, it uses the GM 6 pin connector.

[@blacklotus875]

Hp gains???

[@PhastekPerformance]

That would all depend on the application. With just the throttle body, you wont see much but the air flow will help improve more then just the final number.

[@conf6k87]

@@PhastekPerformance Hey do you know what kind of supercharger that is in the video??

[@paisley2342]

​@@PhastekPerformanceWhat is the recommended air intake size to properly couple the 103mm TB and fast?

[@antonior5425]

This would fit a stock. camaro 2013ss

[@bryanguzman2303]

Do you recommend to get higher cc fuel injectors ? Since there will be more air suction, wont i need bigger injectors? Or just tuning it will be fine?

[@PhastekPerformance]

Depending on your set up and your horsepower goals you might need bigger injectors.