2010-2016 Ram truck folding tow mirror LED signal light replacement

Please use the following link when ever using Amazon.com. Any purchases you make on Amazon will help support this channel.
amzn.to/2mALgqS
Everyone loves mail! Feel the need to write a letter or send something cool?
Motorcity Mechanic
P.O. Box 240
Grovetown Ga, 30813
Please help support this channel by any means such as word of mouth, sharing the links, or by donations. For donations please click on the "support" button on the right side of the main channel page: / vipertech30813
Motorcity Mechanic is your online source of Chrysler, Dodge, Jeep and Ram repair videos. The videos are designed to help everyone from the average DIY, all the way up to the professional level tech. Make sure to subscribe so that you get notified of all the new videos that keep getting added weekly.
Link to this video: • 2010-2016 Ram truck fo...
Check out and "Like" our Facebook page: / motorcitymechanic
Check out and "Follow" our Twitter page: / motorcitymech
Find me on instagram: / motorcitymechanic
Email me directly at [e-mail]
(329)

[@GKrutz]

Dear god thank you for this video I apperciate you..

[@MotorCityMechanic]

GregandSuz Krutz Glad I could be of help. Thanks for the comment and make sure to subscribe

[@samstarnes7669]

Awesome video! Also, something I learned during the process: if the T15 screw breaks, a #6 x 5/8" pan head sheet metal screw works great as a replacement. One of mine was essentially rusted in half and broke immediately. I didn't want to wait for a replacement so I headed to the hardware to find something that would work.

[@briansmobile1]

These are the same mirrors I have on my truck. Mine are still good, but thanks for the knowledge Dave!

[@MotorCityMechanic]

Your welcome any time Brian! Thanks for checking out the videos

[@thomashilfer1343]

Perfect little video. I had them both done in less than 5 minutes. I appreciate the knowledge. Without the video I would have tried to pop the lights out with a knife or something.

[@danielcarson2945]

Excellent video, thanks! Do be advised that the little plastic tabs on the mirror become brittle out here in the SW desert after 5 years. I snapped off 3 of mine putting it back on, and I was gentle with it. Pulled it back off and used RTV to help hold it in place and all is well, and it should come back off down the road if need be without too much struggle.

[@ramblereddie]

I have never subscribed to a channel, but you always have the video I need. You do a good job with the video as well. To the point directions with enough information to get the job done, without all the fluff.

[@MotorCityMechanic]

Many thanks for the feedback and for having subscribed. Glad that I can help and that the videos are appreciated.

[@seedstlc]

Wow takes a lot for my hubby to say "Like this for me will you!" He found you very easy to follow and understand. Great job.

[@MotorCityMechanic]

That's by far the coolest comment I have seen today! Make sure to tell your husband thank you and I appreciate you taking the time to comment. Make sure to subscribe!

[@jasonferguson7636]

Outstanding info, I did each action like you had mentioned and everything works and had nothing break. Thank you!

[@MotorCityMechanic]

Awesome, glad that all went well. Appreciate you reaching out and for letting me know how it all turned out. Thanks for watching and make sure to subscribe and share the videos.

[@stevehandley1482]

Do you have video of removing rear view mirror housing to install mirror tap for radar detector and dash cameras for the 2016 ram 2500 you are the man on how to videos for ram trucks big fan keep up the good work

[@Trucks-kt9gt]

Great job and also great care. You spared no expense, even wearing gloves to keep everything clean and neat. Thank you fo the videos

[@JerryLee..]

Already subscribed and still the best DIY Ram 2500 channel.

[@Seattle_Wayne]

I thought these were running lights, which they are not. I bought a used Ram and they both have been burned out since I bought the truck. Thanks for posting this video.

[@MotorCityMechanic]

Your welcome. Yeah I have seen both go bad over time....the original versions didnt last long. Guess we will see how the replacements work out. Thanks for watching and when you get time, check out my other videos as well.

[@JohnJohnson-we4qc]

I wish they were running lights. I have a 2015 Laramie 2500 and they are not. My buddy has a 2021 tradesman model and his are. His look way better IMO.

[@nessrundberg9682]

Tried your technique David, worked fine. Trouble was deeper. Both lights do not work. Need to troubleshoot, but don't really know where to start. Thanks.

[@randallgriswold1704]

Thanks man, easy enough, you are a good teacher, like your videos

[@rickvega9943]

Thank you for the clear speaking and video. Nice job.

[@billlooney9638]

Excellent job, exactly what I needed.

[@MotorCityMechanic]

Glad I could help. Thanks Bill for watching and make sure to subscribe.

[@lindahernandez6831]

Very knowledgeable person.

[@MotorCityMechanic]

Thank you Linda. Make sure to subscribe and Merry Christmas

[@eddieedwards3353]

An excellent demonstration, Thanks,

[@MotorCityMechanic]

Thank you very much for the kind words! Make sure to subscribe and share the videos with others.

[@Lazylynnfeeders]

Awesome video Dave! My driver side one just quit on me the other day. I have a replacement on the way! Keep up the good work!

[@MotorCityMechanic]

Sweet! Glad to see that the video helped. Hate for the price of the part but glad to see that you know how to replace it now. Thanks John for watching and make sure to subscribe. I have plenty more videos that might help you one day so check them out.

[@reaper8847]

driver side is out on my 2015. Thanks for the schooling! will do it myself.

[@MotorCityMechanic]

Cool. Its nothing to it so you wont have any issues. Thank for checking out the video and make sure to subscribe if you havent already

[@Imacbet]

Awesome, now I know what to look for and how to fix it, if that's the issue. Error msg for failed signal, flasher working double time, only the mirror signal is doing that, front and rear are flashing normal time. Likely one of the 4 LED's is fried. Thanks man.

[@MotorCityMechanic]

+Imacbet Your welcome. Thanks for the feedback. Make sure to subscribe

[@clinthemphill]

Did this end up being your problem with it flashing fast?? My 2013 says front signal out intermittently but they are fine (front and back) it's the mirror bulb blinking fast. Thanks in advance!

[@forthefunofit5487]

this was very helpful and I got it fixed!! Thank you very much.

[@georgetucker336]

Very clear and easy replacement video. Before reinstalling light after hooked up, is it ok to check the light at that time?

[@mmcpa]

Clear and concise. Thank you.

[@MotorCityMechanic]

Your welcome Jonathan! Thanks for the feedback and the kind words. Subscribe if you havent already.

[@zninenineeightandroidphone5377]

Thank you so much. Real professional!!!

[@MotorCityMechanic]

Many thanks! The kind words are appreciated. Make sure to subscribe if you havent already.

[@barrybebenek8691]

Thanks for this vid brother. 👍🏼

[@stephenajones4438]

Thanks for the Video David.

[@MotorCityMechanic]

You are welcome and thank you for watching. Make sure to subscribe.

[@johnquirk6059]

Excellent video to do what I need. Thanks.

[@aguilar211227]

You also do an awesome job!! I really appreciate your videos and work, keep up the good work!

[@MotorCityMechanic]

Thanks Rudy. I have no plans to stop so you just keep watching. Have a great weekend!

[@nataliejoyce1581]

great info!! thank you

[@bkbrown5881]

Great job. thanks for the help.

[@MotorCityMechanic]

Thanks! Always glad to help share a bit of knowledge.

[@kathleenfeenstra9561]

thank you great instruction.

[@MotorCityMechanic]

Your welcome and thank you for the kind words! Make sure to subscribe.

[@marcelmarino5074]

Thank you very helpful

[@MotorCityMechanic]

Your welcome. Glad that I could help. Make sure to subscribe.

[@EchoKilo]

Another great video. I just swapped mine out in about 5 minutes. My 2014 3500 did not have that black plastic piece on the rear of the light (driver's side). Maybe that it is why it burned out after only 4 years.

[@MotorCityMechanic]

Thank you sir! Nothing very difficult as you saw. Appreciate you watching!

[@mattmclean4478]

just what I was looking for. Thank you.

[@MotorCityMechanic]

Glad you found it Matt, Appreciate the feedback, Make sure to subscribe and share the videos.

[@robertobotello8509]

Thank you for the video it helps a lot👌

[@MotorCityMechanic]

Your welcome Roberto and thanks for watching! Make sure to subscribe.

[@MartinPerez-sl4mc]

EXCELENTE!

[@MotorCityMechanic]

Thanks Martin! Make sure to subscribe

[@lorgar8939]

Thanks for the video I have a 2011 Outdoorsman and both sets of lights are out on both sides. The puddle lights almost caught fire due to corrosion inside the mirror. At this point its almost cheaper for me to buy new mirrors.

[@MotorCityMechanic]

I fully understand. I'm sure fixing it by replacing each item does add up quick. Thanks for watching and make sure to subscribe

[@lebotube64]

excellent and clear video, thx a lot !

[@MotorCityMechanic]

Thanks for the keep words. Mych appreciated. Make sure to subscribe and share the videos

[@joseguillen8479]

like your videos i learn alot but do you have a video on how to remove the other led at the bottom of the mirror.

[@MotorCityMechanic]

Morning Jose.....I have been asked that 3 times this week. I do believe I may stay a bit late today and try to film the procedure. Its very simple but I think it still deserves some camera time for all those that ask. Make sure to subscribe so that you get notified when videos such as that get uploaded

[@dtaposse8858]

Hey David great video,I got a 2015 ram express,I added the puddle turn signal side mirrors and my ck engine light came on and also the temp guage is reading -40 degrees do these mirrors need to be flashed on the computer any info would b greatly appreciated thx

[@jlr3482]

I realize this video is several years old, but would the same process apply for a 2022 with powered convex mirrors?

[@Yeska34]

Great video ✌🏼

[@MotorCityMechanic]

Thanks Edgar! Appreciate the feedback.

[@randallford5584]

Are the R&L LED lights interchangeable? Thank you

[@ghassanshihab3616]

Thank you, was wondering how to replace it

[@MotorCityMechanic]

Your welcome and thanks for watching.

[@mikeholitski560]

Hi, I just watched your video on the 2010-16 folding tow mirror LED replacement. You show how to remove the side convex mirror. How do you remove the main mirror glass? Thank you. Mike

[@MotorCityMechanic]

Morning Mike. If you email me at [e-mail] then I can send you the info on how to remove that portion of mirror. Please make sure to let me know if its the same as in the video.....2 mirrors or the single mirror non-folding. It will make a difference. Thanks

[@TheBoswellk]

Thanks

[@MotorCityMechanic]

Your welcome sir and many thanks for watching. Make sure to subscribe.

[@tuneman59]

Hi, I often follow your videos, thanks for all the help!!! However,I followed your instructions on checking my passenger turn signal and popped the mirror like you said. I could not check the function of the light connection with a test light. I was hoping to so that I didn't risk damaging the driver side. It didn't work so I did the same technique to the driver side and shattered the blind spot mirror. Mine is not the same as the passenger side. Now I am guessing that someone replaced it with aftermarket. I had to remove a screw to get the broken mirror off and the screw was located behind the mirror. They driver/passenger should be the same correct? 2011 Ram 2500 SLT. Thanks

[@MotorCityMechanic]

Sorry to hear that it broke......you may be correct that someone replaced it. I havent had one with a screw holding it so it makes sense that it isnt OEM. The procedure for the drivers and passenger side should be the same procedure when trying to take it off. Thanks for watching the videos.

[@tuneman59]

Thanks, yeah I thought it was aftermarket. No way to get the spot mirror off that I could see. The screw was behind the mirror glass. It was unfortunate that I couldn't have checked it without this happening. I didn't plan on having to buy a new mirror. I did find an OEM on eBay in excellent condition for less than half the price of new. Plus I found a matching light on ebay because the dealerships all have the newer version which does not match the original. So it'll all work out. Keep the videos coming, this truck is nice but it's been a handful since I bought it. Lol....

[@MotorCityMechanic]

Still sucks none the less. Just goes to show the quality of aftermarket mirror and other parts....not designed the same.

[@chandlersmith6965]

Thanks for your video. I'm about to install a set of these mirrors on my 2016 RAM 2500. The truck currently has standard mirrors with no turn signal or puddle lights. How do I make these lights work on the new mirrors I install on my truck? Seem to be unable to find anything definitive online.

[@MotorCityMechanic]

You have to have the vehicle configuration changed at the dealer. Its a procedure where they go online and add the sales codes related to those mirrors and lights. They then download that updated config to the vehicle and then the vehicle knows what it has and they should then work. Thanks for the question and make sure to subscribe

[@chandlersmith6965]

MotorCity Mechanic Thanks! Do you happen to have the sales codes?

[@anthonymacneil2279]

Another great video. On a non related thing what are you thoughts on the Ram air suspension any issues from customers? I have it on my 2013 Sport and it's great

[@MotorCityMechanic]

I can actually say that I personally haven't seen any issues so far with that system. Doesn't mean there could be but none have come thru the shop with any problems. Seems to be holding up well. We have a similar system in the Jeep Grand Cherokees and they too have done well. Thanks for the kind words as well and I appreciate you watching

[@jimeckenrode1271]

Dave, I have a 2013 Ram and none of the mirror lights work, I can't believe the all burned out at once. Is there something I should be checking?? I did check fuses and they were good.

[@agk4lfe]

oh and great video keep up the good work.

[@gregduncan6344]

Where did you get that bulb from bud I can't find one anywhere they want me to buy a whole mirror or the bulb themself at the dealer is $180

[@danielduncan8345]

hey man. I know this off topic on the video. but I have 2010 ram 2500 crew cab. my truck front driver and pass side windows work off my master switch . no the pass switch wont roll down the window.and the rear windows wont roll down on the master switch nor on the back window switches. I changed the master switch and still same problem . any recommendations? fuse maybe?

[@delmcgee4165]

Hey David, love the videos man. I have a 2001 Ram 3500 with manual mirrors and no power door locks or windows. I also have a 2001 van that DOES have power windows, door locks and mirrors. How difficult a job would be for me to swap the doors and have power? Are the connectors necessary to do it already on the wiring harness? Would it just be a swap the doors, plug and play deal?

[@MotorCityMechanic]

Evening, the main issue I would see is that I wouldnt think that the doors would be able to be swapped being that they are two completely different vehicles. That will also include all the internals as well. You will have to try to find another like truck that you can take parts of. When it comes to the wiring and connectors. Not all vehicles came prewired for items that they didnt have so you will more then likely have to modify the wiring.

[@delmcgee4165]

I thought the doors of vans and trucks of that era were the same. Yeah, I guess that would be a challenge. Thanks

[@MotorCityMechanic]

The van actually had an arch at the front of the door to match the wheel opening......the truck doesnt. Your welcome and thanks for the question.

[@jasoncomstock2350]

So its safe to assume that if one of the 4 lights in the signal light are working, then I just need to replace it to get all four working?

[@MotorCityMechanic]

Sounds logical to me Jason. Thanks for watching and for the question. Make sure to subscribe.

[@mpgrimm7540]

Do you have a video/How to for removing/replacing a mirror & puddle/signal light on a 2018 Ram 1500 Laramie with standard Power Fold mirrors (not tow mirrors)? - I'm trying to figure out how to get mine apart without breaking it so I can replace the outer chrome housings with black ones I have.

[@MotorCityMechanic]

Are you talking about the new redesigned 2018 or the older model thats still showing up and labled 2018 as well?

[@mpgrimm7540]

I honestly didn't know there was a mid year difference for the 18's. My 18 Ram1500 Laramie looks like all the 13-17 trucks to me minus the UAx Radio. Got somewhere I can email a photo to? Or see my 18 here ...www.ramforum.com/index.php?posts/1720540

[@MotorCityMechanic]

Yeah both body styles are coming off the trucks as we speak. Call them 2019's if you like but they are being shipped with the previous body styles at the same time as they get rid of the older models that are still leaving the factories. Looking thru the service info....there is nothing about the mirrors being taken apart or the steps needing to be followed. It gets replaced as an assembly other then the glass/mirror portion.

[@mpgrimm7540]

Thanks for the reply. I just need to be able to get the mirror glass out without breaking them. I've got a hold of the service manual directions from a 2015 Ram but looking in over the top at the back of my 4th gen 18 Ram 1500 Laramie power fold mirrors... the attachment is definitely different than a standard mirror (pull down from the top) but I'm not sure if it's similar to the 2 panel tow mirrors (push up from bottom w/trim tool). If you want to shoot me an email I'll reply back with pictures, etc if you want when I get back up. [e-mail]

[@clinthemphill]

My 2013 keeps saying front turn signal out (both left and right but almost always left) but they are fine. However, when it says this, the mirrors do blink fast. Do you think it's the mirror signals?? TIA

[@izzyfabreezy4097]

I installed the 4th gen mirrors with the signal lights on my 2000 ram 3500 would it still be the same removable process?

[@vais3]

Do you have a part number handy for the signal light replacement?

[@sebase6577]

I need one too please

[@ramblereddie]

@@sebase6577 I just bought passenger side. Dorman 926-122. I think driver's side is 123

[@mikel.laughridge9480]

for the LH assembly replacement my light is out but .......mine has the Temp sensor. Do I need a special replacement part or just regular lamp assembly.

[@MotorCityMechanic]

If you replace the unit with one that doesnt have the temp sensor....it can cause a check engine light in some cases. I highly recommend getting with your local dealer and give them your VIN # so that they can match up exactly what you need incase there are multiple different versions. Thanks for asking and make sure to subscribe.

[@guadalupevasquez7260]

Where is the fuse for those signals before I change them out ? Thanks

[@kuttzthroatrixh4382]

Found out ?

[@cdstruckandoutdoor7219]

Hi, I'm attempting to replace this light. I got the new blinker light in place but cannot get the black plastic back cover to go back into place. Any tips?

[@pepywestside6350]

Hey man you think you can install some paddle shifters on a ram r/t if it's possible?

[@MotorCityMechanic]

I havent tried it or researched it to see if its possible. So I cant be sure if its possible or not.

[@PatCole-j2y]

How do you remove the main mirror plate from the base of the mirror??

[@brianheck1843]

Just a note. I have 2010 2500 with these folding mirriors just without the chrome. and while this process was great for my driver’s mirror, I found out the hard way that the passenger side spot mirror does not remove this way: are no clips. The only way mine could ever have been assembled was to screw the spot mirror platform into the mirror frame, and then stick the reflective surface to it. Disappointing. Now I have to find a replacement glass. But hey, with the reflective surface broken out I could remove the screw holding in the base and then get to the turn light. Thanks anyway.

[@jamestaylor-qb9wo]

What if just this light is hyperflashing and the front and turn signals are still flashing normal?

[@curtfoltz6309]

I have a 2010 Ram 3500 and the 12v power outlets or the 115v Ac power outlet dnt work I checked the fuses in the box on driver side all good Any suggestions

[@jgonzalez187]

I have those exact mirrors on my Laramie and recently the feature that pans the mirror downward when you put it in reverse is starting to go out, is there a way to replace the motor on the mirror thats going out? Its weird because if i adjust left and right that works perfectly but up and down is really slow to work

[@MotorCityMechanic]

The motors arent avail seperately. If the issue is affecting both mirrors then a possible wiring or switch issue. If just one mirror then theres a chance that the mirror may be needed. Thanks for asking and dont forget to subscribe. I have more videos like this so feel free to check them all out.

[@69dogodon]

My side mirror WILL NOT pop off like that. Any suggestions???

[@StanRandle-i4q]

How do you get the passenger side out?

[@kennickerson2623]

hello dave I recently replaced the passenger tow mirror on my 2014 ram my signal and puddle light was working on the driver side but when I installed the passenger side the lights on the driver no longer work but passengerside does would that be slow voltage issue with one being an led one the other being a regular bulbs

[@MotorCityMechanic]

Thats very odd. I havent come across that yet. I dont see how one can affect the other. Looks like something I would have to check in person to get my head wrapped around it.

[@kennickerson2623]

sounds like I have to go to the dealer or take off the old lights a d them on the new mirror and see how that works and if does I'll definitely let you know

[@kennickerson2623]

if my truck came with regular bulbs for the turn signal and you replace it with an led signal light and the being a normal bulb theres a difference in voltage draw the led draws less power then the regular bulb I had this issue with my western star highway truck I'm thinking it might be the same just a thought

[@XxxMrENJOIxxX]

My light has a different connection. I thought I had the same mirror but both my puddle light and signal light have clip in connections. They don’t connect to the prongs. Is there an adapter to put on the prongs so I can connect my lights to the mirrors wiring?

[@Prima10ne]

You ever get a solution to that? Mine have that same clip in connection instead of bare leads. I don't see any videos about it or stores selling that style. I assume it's a aftermarket mirror that used unique connections for some reason

[@songyan4785]

I had a truck came with the towing folding mirror too. Didnt know how to remove the led signal? And i look into TechConnect they didnt explain how to remove the led signal light mirror. Where would you find in TechConnect when the information didnt explain the concave mirror suppose to removed, when they didnt say that in TechConnect. And i had to break the led signal just to get into the T-15??

[@MotorCityMechanic]

+Song Yan when I went online to find the info on techconnect.....I search electrical......exterior lighting.....and lights/mirror. In that section it broke it down to folding tow and non-tow mirrors.

[@kylecrouchet6065]

I have a second gen though and have the chrome tow mirrors for that year model and it has the amber color

[@MotorCityMechanic]

Exact year?

[@kylecrouchet6065]

MotorCity Mechanic 99

[@MotorCityMechanic]

1999......didnt even remember us having mirrors with puddle lights back then. All the mirrors I can think off didnt come with any lights. Unless some swapped them for aftermarket assemblies. The service info also doesnt make mention of them either. When I pull up the list of bulbs for that vehicle.....nothing showing for the mirror.

[@kylecrouchet6065]

MotorCity Mechanic yeah they make them now only a few people make them I'll just get some of the 4th gen lights and pray they fit.

[@MotorCityMechanic]

When I did a search before what I saw did seem to be aftermarket replacements that were modified. They look very similar to the newer styles. Possible newer knock offs made to fit the older trucks.

[@wallymock4532]

On my 2013 dodge ram 2500hd laramie. Left turn signal was bad on mirror and had to replace the whole mirror head. Now when I turn on my left signal the dash indicator flashes fast at times but all others flash normal also states left signal is out. Thanks for any info

[@wallymock4532]

Should state that all other lights flash normal and no bulbs are burnt out since they are LED

[@vais3]

Any chance you can do the non-towing mirror LED assembly?

[@MotorCityMechanic]

I will certainly keep it in mind. I have seen that others want to know about the other lights and also the glass portion of the mirror so I certainly need to make a few videos on each of those items. Thanks for the request and make sure to subscribe if you havent already.

[@silversvcs]

Well I followed your video step by step and the mirror cracked. I was trying not to apply a lot of pressure but it wouldn't budge. I had to order a replacement but I'm concerned that when I try to remove the one that's on there, I damage the assembly it clicks onto. These steps would definitely work on a 2014 Ram with towing mirrors?

[@JasonCarmichael]

I just did it today on a 12. When I put the convex mirror back in, it took a lot more pressure than expected. It sounded like a lot of broken plastic, but it is fine.

[@agk4lfe]

have you done a video on how to replace a driver side mirror. mine is cracked.

[@MotorCityMechanic]

I'm sure I can work on a video. What year and is it a folding tow style mirror?

[@marcosreyes4545]

🙏👍👍👍

[@rayvonp]

How would you go about changing the puddle lamps in the mirrors?

[@MotorCityMechanic]

The puddle lamps are even easier.....all it requires is a small pocket screw driver to pop the lense assembly loose. I will try to make a video in the future for this replacement as well. Thanks for the question and video idea as well. Make sure to subscribe and help spread the word by sharing these videos with others.

[@Ross-K]

I have a 2011 Ram 1500. My lights are on the bottom of the mirror. is it a similar process to replace?

[@MotorCityMechanic]

That specific light is a video that I have on my "to film" list. I have been asked this recently by others. There are 2 mirror styles.....folding tow mirrors and none tow mirrors. I assume you have the non-tow version with the forward facing light on the bottom corner of the mirror. I can give pics of the steps in the comment section here. You can try to email me and I will send what I can find or give me a week or so and I will work on filming the repair. Email is [e-mail] if you so desire.

[@Ross-K]

Okay, thanks. I'll send you an email

[@VenomGaming0918]

What about how to go from normal mirrors to those tow mirrors?

[@MotorCityMechanic]

I actually did one of those swaps last week. Wish I had the time to have filmed it. The tow mirrors require installing a reinforcement bracket behind the door panel due to the added weight when it's unfolded. It came as a kit thru Mopar....both mirrors, brackets, and related bolts and thread inserts. To get the lights to work.....the sales options have to be changed online and downloaded to the vehicle. That means that you can do 90% of the swap but the dealer will have to do the other 10% to make them work correctly. Wish I had more time to film these type of repairs but the work load dictates that lol.

[@VenomGaming0918]

+MotorCity Mechanic how much is the kit? I have a 2500 diesel, with the towing package. Blown away it didn't come with the tow mirrors!

[@MotorCityMechanic]

+Joshua Ackley If you can.....email me at david@motorcitymechanic and get your VIN and I will have the guys in parts check on it for me on Monday.

[@am0205751hawk69]

How do you take off the other glass on the mirror

[@ghassanshihab3616]

where are you located at Detroit!

[@MotorCityMechanic]

Wish I was but actually further south on I-75.....more like Georgia. Long long story.

[@thomasjones-8896]

How to replace the tailgate lock on 2011 Ram 1500

[@masterchief6761]

I have 2014 ram how do I change out puddle lights under base of assembly

[@MotorCityMechanic]

The procedure is fairly simple.....it just snaps in and a small flat tip screw driver will be able to remove it. If you email me at [e-mail] and I can send you the service images to help. Eventually I need to do a video on its replacement.

[@jenniferpasten8847]

I can’t find the FUSE! Please help!

[@tommiller67]

got a 2016 2500 Ram trademen diesel I want to put power folding mirrors can you tell me what part numbers to order

[@MotorCityMechanic]

Hey Tom. I checked with the parts department and they will need the VIN of the vehicle inorder to check further. You can email me it to [e-mail]

[@tommiller67]

MotorCity Mechanic

[@MotorCityMechanic]

Not sure if you meant to send more in the comment? All I see if the channel name lol. Just checking

[@alfredocruz3314]

I will like to upgrade my 2010 ram 1500 slt,were can I get those mirror??

[@MotorCityMechanic]

+Cruz Serrano you can try your local dealer to see if they offer them as a kit. Some years models are avail that way. They come you support brackets you need to install for the added weight that go on the inside of the doors behind the door panel.

[@kyledye7768]

Where can you find the replacements and what are part numbers?

[@tonyacrawford8656]

Any update on the answer for this question?

[@defiantone1593]

Would be nice if there was a easy way to make those into running lights.

[@MotorCityMechanic]

Very true. Thanks for checking the video out. Make sure to watch my other ones and dont forget to subscribe

[@vorkski860]

Prevailing Viking there is a splice kit to do so

[@MotorCityMechanic]

If you get time....post a link to that kit so that I can check it out as well. Thanks

[@DerrickCByron]

MotorCity Mechanic heya did you ever find a splice kit to make those into running lights by the way? Thanks again for the video

[@hoseamiller6588]

Derrick Byron ,David Rivet from Royse City,Texas sells a kit. U can find him on FB.

[@raymondlanier1112]

I’m trying to replace my right hand side and it does have the black plastic piece . My problem is Autozone and oreillys is selling me the wrong part . The new light won’t let the black plastic thing go in there right because it’s raised on the back . Anyone else having this problem

[@donhgr]

I'm kind if surprised how dull my light is as compared to other vehicles I see 2016 1500 Big Horn

[@djleach7855]

At the end you should have had the light flashing in the back

[@midniteautos]

Can this fit on models W/O factory led ?

[@MotorCityMechanic]

Are you speaking of swapping mirrors? Swapping from non-towing to the towing version in the video?

[@aubreyroche5080]

2011 Ram 3500 I have had for a week now, started to think they were just some weird Clear plastic Beauty feature.. Neither of them work.

[@brianlevno9472]

Aubrey Roche you can set the to turn on and off. I was playing with my truck and I can't remember if I access them through the media center with the radio portion or I was somehow able to access them through the instrument cluster with the controls on the steering wheel. Not sure if the manual tell you how to do this but you should play with settings on both and I'm sure you'll figure out how to turn them on. Had something to do with the timers on the headlights I think

[@davidodekirk2711]

The only way this video could be better is if you supplied me with the replacement LEDs!!!

[@MotorCityMechanic]

+David Odekirk I need to start a store and pitch my own products lol. Oh I don't need that added stress lol. Thanks David for checking the video out. Make sure to subscribe and share the videos

[@kylecrouchet6065]

Does anyone know the bulb type in the puddle lights? Want white LEDs in mine

[@MotorCityMechanic]

The puddle lights under the mirror show to be LED already and are part of the puddle light lense assembly.

[@alilGoat]

Ok but what is the bulb size ?

[@MotorCityMechanic]

It’s LED so there is no bulb size

[@alilGoat]

@@MotorCityMechanic part number?? Can't find it