2010 HONDA CIVIC LX - FENDER LINER REPLACEMENT

[@trythatinasmalltown-d7h]

thanks for the advice friend i had put one in and it actually fell out while driving put another cheap one on other side just jacked up the car to put another cheap one in and found your video now i am online getting an oem so i can do it right thank you for taking the time to record this

[@MarcusFerguson16]

@@trythatinasmalltown-d7h Absolutely! I’m so glad I’m able to help! 🙏🏽

[@RealUncleMiles]

Marcus you nailed it with " you get what you pay for". I just bought my 1st Honda. 2008 civic coupe. Thanks for saving me the regret of buying those. Have a nice day.

[@MarcusFerguson16]

No problem! I'm glad I could help!

[@ruffgrave]

inspiring. got an 06 and now wanna restore mine before i add visors

[@marshalljhughes007]

I'm learning too and I'm way behind you but your video's inspiring. Thanks for the info and tips. Gonna buy OEM parts for my Lexus and follow this video to get it done when the parts arrive. Thanks again!

[@ChicagosJC]

Good vid. Wish more car videos were like this. Great editing and pauses.

[@MarcusFerguson16]

I appreciate that!

[@JeremiahBack]

I'm glad I saw this video. I also bought a fender liner that was not a genuine part and I have the same issue so I'm going to send it back and get one from Honda.

[@keizomatsuzaki]

OEM parts have 3 times markups don't go for it Taiwan aftermarket parts usually work alright in terms of quality and price

[@weedsmoke_503]

Found me the oem suspencion kit link for the 2010 civic si sedan pliss i can't found it anywhere 😭😭😭😭

[@yarimarperez-fleitas3612]

hi! i’ve been watching this trying to figure out what parts i need to buy to fix the whole front of my honda civic coupe 2010. whoever had it before me crashed and it looks like it’s missing all the pieces that go with the bumper (lower grille, center grille, fog lights) and i think it’s missing the front fender liners as well, because you can see the whole inside of the car parts through the side, by the tires. could you tell me if there’s anything else i should buy to complete the set? i feel like i’m missing something else. i don’t think i should be able to see all the wiring and parts through the bumper sides lol. appreciate your videos, very helpful for people like me with no experience.

[@MarcusFerguson16]

Hey there! You're definitely missing the fender liners. Some people don't use fender liners, but it's there to protect your wiring and everything near the wheels. So definitely get those! Don't buy the ones from my video because those are for the sedan. I can search for your model and send them to you. Just let me know. As far as the front bumper goes, I feel like I'd need to see a photo to give you accurate information on what you might need. Are you just missing screws and clips?

[@yarimarperez-fleitas3612]

@@MarcusFerguson16 For the front bumper so far I bought a new painted one, the fog lights, lower and central grille. I haven’t bought the fender liners yet, so I’d appreciate if you could give me a link! Besides that, I don’t have the screws or clips yet either. I found a pack on Amazon, but not sure if they’re the right ones, since they bring many different types. If you recommend any specifically let me know as well. thank you !

[@MarcusFerguson16]

@@yarimarperez-fleitas3612 Sorry for the late response. Here you go: www.hondapartsonline.net/oem-parts/honda-fender-l-front-inner-74151svaa00?c=Zz1ib2R5LWFpci1jb25kaXRpb25pbmcmcz1mcm9udC1mZW5kZXJzJmw9OCZuPVNlYXJjaCBSZXN1bHRzJmE9aG9uZGEmbz1jaXZpYyZ5PTIwMTAmdD1seCZlPTEtOGwtbDQtZ2Fz www.hondapartsonline.net/oem-parts/honda-fender-r-front-inner-74101svaa00?c=Zz1ib2R5LWFpci1jb25kaXRpb25pbmcmcz1mcm9udC1mZW5kZXJzJmw9MSZuPVNlYXJjaCBSZXN1bHRzJmE9aG9uZGEmbz1jaXZpYyZ5PTIwMTAmdD1seCZlPTEtOGwtbDQtZ2Fz Just make sure you input your VIN to make sure these fit. They should be the right ones, but it doesn't hur to double check

[@ryanfarmer5155]

Those are called wheel chalks. Do you recall what size push pins you used? Good job

[@MarcusFerguson16]

Thank you! I used whichever one fit the most snug honestly.

[@44foa]

I needed this video!!!! Thanks homie!!!!

[@MarcusFerguson16]

Sorry for the late respone! But I'm glad I could help!

[@alexharshman7025]

For real though. I got an 08 si that has no fender liners, haven’t drove it hardly at all on the account it looks like the snow and water would just roll off the tire right into the back of the headlights and all the wires and stuff. Ooofff. Wondering about the part called a fender support, driver door at the bottom right where the fender meets it kind of catch’s and I have to pull the fender back out just a touch, like it’s just a flimsy piece of metal with nothing behind it, a nuisance thing

[@spencer5864]

Glad I came across your tutorial video! Need a new R Front Fender Liner. You earned yourself a like and subscribe from me!

[@MarcusFerguson16]

I'm glad I could help and I appreciate that!

[@LitosWay99]

Where’d you get those headlights tho?🔥🔥

[@MarcusFerguson16]

I got them from CarID: www.carid.com/2010-honda-civic-headlights/spec-d-halo-led-projector-headlights-284581322.html

[@ampulsion]

Yeah got a Honda Civic 2007 idk y but couldn't get the wheel off 🤦‍♂️

[@MarcusFerguson16]

Could you tell me what happened or what you tried? I could try and help.

[@ampulsion]

@@MarcusFerguson16 just a stiff wheel got it off

[@usaywhen1]

What are the part numbers for each side?

[@MarcusFerguson16]

Fender, R Front (Inner) - Honda (74101-SNA-A00) Fender, L Front (Inner) - Honda (74151-SNA-A00)

[@usaywhen1]

@@MarcusFerguson16 thank you so much!!

[@BB-wh1nr]

Thank you, so helpful

[@MarcusFerguson16]

No worries! Glad to help! 🤙

[@WhosmanzYT]

Haha never go cheap with your car. But yeah, you were right, you loosened the lug nuts. I’m excited to see all the stuff you do with your car though

[@MarcusFerguson16]

Thanks cuz! Thanks for teaching me the terminology! 🤙🏽 I’m excited too! I tried to paint my car and failed miserably lol, so now I’m getting a wrap.

[@robertevans3604]

Thank you for the vid.😄😄😄

[@MarcusFerguson16]

No problem! 😅

[@Cuongnguyen-jc7nf]

Thank you for your video that very good

[@bobbarker5884]

Thank you sir!!

[@optimusprime4273]

And now you’ve scared me because I just bought a wheel liner for my civic 2016

[@MarcusFerguson16]

Did you buy it from Carparts.com?

[@danmcclure6670]

Yep, it doesn't pay to be cheap. You get what you pay for. The 'bricks' are called wheel chocks. You may want to invest in a Milwaukee or Ridgid impact driver to remove your lug nuts. Your shoulders and elbows will thank you. Like your choice of Falken tires.

[@MarcusFerguson16]

Danno, thank you for letting me know the correct terminology; I'm slowly learning. And thank you for the recommendations! I will definitely buy them because I was struggling!

[@hoobered1232]

My impact driver is an X lug nut wrench and a loooong pipe. My 10 year old son cracked them loose.

[@Man-dr6mc]

Wish I would've seen this earlier, just bought the same ones and holy fuck they're so flimsy

[@MarcusFerguson16]

Yeah we learn the hard way! Haha

[@OneChallengeChannel]

Welp I just bought 600 worth of parts from car parts🤦🏾

[@MarcusFerguson16]

Hey! You never know, they might work out for you! If not, you know where to go!

[@joey8567]

Please stay away from mail order Amazon crap. That goes for clips too.

[@joey8567]

Just went further. 120 clips from Amazon. OEM or reliable sources. Those Amazon clips will be disappearing and another video!🤣.