2011-16 Hyundai Elantra Drive Belt Replacement

[@dbriand4589]

Thanks for the great video. I finally replaced my belt after 342,327 kilometers. The belt still looks good keeping it as a spare. Thanks for your help. 👍

[@rappy90]

Your elantra actually made it that many kms? Mines at 183k and im over here wondering if the engine is toward the end of its life. Put high mileage oil in, only ever had breaks done, trans fluid changed and fuel injectors cleaned and plugs changed on it.

[@DFranklin01]

You just saved me $90. Belt replaced. Thank you for the clear go by.

[@HoustonTexxas]

Had no clue on how to change this belt on my girlfriends car till i found this video. Good job man thanks

[@toddt6730]

The dealer just told me they want 279.00 to replace it , I'm gonna do it in spring, its 12.99 part, thank you for this video, I now feel that I can do it myself

[@cyclonus01]

Thanks for the video. Is it possible to replace the AC belt from the top as well or do you have to jack the car up and remove the tire and go in from the side? thanks.

[@Archangel9093]

Rich, how do you gauge belt tension properly?

[@jt4199]

Outstanding video. Totally breaks it down Crayola style. Step by step

[@jrock-xs9vp]

Great video do you know if a 15 accent has the same setup looks better then that dam tensioner

[@boot-camp2197]

How much tension should be on the belt? How much do you torque down the lock bolt , tensioner bolt and pivot bolt? thank you

[@Chris7Lawrence]

Great. Just saved me buying a serpentine tool that I don't need. Can you do a similar video on a 2009 Hyundai i30 because very different and tight space?

[@glockks56]

How many pulleys and in what order do u put the belt on?

[@zx8401ztv]

Well worth your time and swear words rich :-D. The bolts didnt look too horrible to get to, some vehicles seem like torture machines lol.

[@simonsimon1309]

You are the best I always wait for you and I hope you can talk about Santa Fe SE 07 more and god bls you keep going we love you

[@thomassilva7746]

Congratulations! Next time I will replacement belt myself

[@randomreviewsAR]

Great video and very detailed! Thanks!

[@MeeshTheForce]

Is it still the same with a 2013 Accent?

[@Seadogdoc]

Thanks for posting this.

[@darthphaser2991]

After replacing mine a couple months ago, it's starting to squeal now. Does it need to be tightened again? I feel like it may have stretched a bit or got loose. And do I have to loosen the 2 bolts on the alternator again, tighten the belt, and then tighten the alternator again? Or is there another way to tighten it?

[@Breca]

Thanks Mate ! good on ya

[@amb7247]

Looks like it was easier to put the belt on the alternator last than to put on alternation and route to middle pulley?

[@fabioeduardoromeroossa3098]

Excelente video .Gracias por compartir

[@shadesofblue5719]

Nice content, but you were not leading us enough on what you were doing, how tight it should be etc

[@Smile-uwokeup-2day]

Cool vlog here n I have same yr car n needs to do this repairs too good vlog info

[@johnhernandez8539]

That diagram is wrong.

[@buzzsgarage]

USE the CORRECT TOOL it's called LEVELAGE

[@frankgriffin4567]

LEVERAGE WRENCH EXTENDER

[@nicolemuse1164]

I think it's my belt the pulley below the top one is not looped around so just Shiney metal

[@davids9139]

Do you like the Dayco belt?

[@RichpinTv]

I have had good luck with dayco belts.

[@miguelmontoya1157]

Thank you so much

[@RichpinTv]

You're most welcome

[@johnsonabban7476]

What's the size of the belt

[@claxtonjohnson3539]

Ty so much

[@testtesting2868]

You showed the specs for belt tension but you didn't check the tension. People, don't install like this. A belt too tight of loose will cause other problems.

[@doncouet3001]

Thank you

[@RichpinTv]

You're welcome

[@daw3atherman459]

I got a 16 mine not set up like that

[@kristeng1729]

Same 2016 1.8 but I have a automatic tensioner

[@willytrouble88]

Wow...that's a lot of torque on that belt! 150 ft pounds?? that can't be right. the wheel lug nuts are torqued to 60 ft lbs so I can't imagine a belt tensioner bolt would be more than double that torque. You would need a 3 foot torque wrench to achieve this amount of torque. Am I wrong? someone please chime in here.

[@rappy90]

alot easier than a timing belt

[@buzzsgarage]

Use a long handle tool Stop USING A PIPE

[@كرارضياء-ث2ل]

شكرآ جزيلآ

[@sanchezwilly18]

wowwwwww thanks!

[@RichpinTv]

No problem

[@vishalrajbhar7550]

Bhai bealt no kitna hai

[@kk-hp6ve]

240 at dealer

[@sylviaisgod6947]

Useless video, nothing about how to check and adjust tension.