2011 - 2016 FORD SUPERDUTY LOWER VALANCE ON A 2005 - 2007 BUMPER

[@FiveBoroNative]

Very nice...!

[@kurtisallingham7516]

mirrors, mirrors, MIRRORS!!!!!! 2008 and up. just wire up the running lights at very minimum super easy. other then that, good job. I like how you describe everything and everything you are doing. very descriptive. thumbs up from me

[@InTheShop]

I like the small mirrors. I think it would look goofy with tow mirrors since it’s a race truck and will never tow a trailer.

[@as3sxp]

Nice! Looks good. Anyone else notice the random beetle walking around at about 8:40? 😂

[@InTheShop]

Haha I hate those beetles. Things are everywhere.

[@as3sxp]

@@InTheShop Do you know if that will fit an '08 Super Duty? Or probably the same and will require some modification?

[@InTheShop]

@@as3sxp I’m sure you could make it fit but you can get a 08-10 lower valance for a 450-550 and they are similar and would go right on.

[@as3sxp]

@@InTheShop awesome, thanks!

[@ryanspencer3345]

Looks really nice but can you show what your doing it just is better visually

[@essayondo623]

Would have been nice to see the back side to see where the cuts were made and how it bolts on.

[@fordmuscleluis9710]

Glad you got the 2011-2016 Valance installed in this Truck bro

[@InTheShop]

Thank you! Me too man. I’m very happy with how it looks.

[@fordmuscleluis9710]

@@InTheShop I agree also I can't wait to see more videos of this DT466 In a super duty such as how it starts how it sounds and all that

[@tylerramsey7396]

Hell yeah man looks really good all together!

[@InTheShop]

Thank you!

[@atomicorang]

Like the paint ❤

[@sagepeace2607]

Looks good

[@InTheShop]

Thank you!

[@Itsa_Mea]

Looks awesome!

[@InTheShop]

Thank you!

[@stevenraymer6682]

Looks awesome brother

[@InTheShop]

Thank you!!

[@bradenclifton45]

Did you paint over the Crome on the bumper? Have a 1999 7.3 short bed single cab! And doing 6.0 front end swap!

[@jessegoldston70]

Yes indeed! Looks great doing that to my truck!

[@InTheShop]

Takes a little tweaking but looks good!

[@kyledillman5257]

Looks good but don't help show anybody where do drilled new holes or anything behind the bumper. It be nice to see that for other people including me too feel more confident on doing this

[@InTheShop]

I agree and wish I would have shown that better. I used the factory holes on the bumper and drilled through the plastic valance itself once it was lined up where I wanted it. So just line it up on the bumper and send a drill through. Hopefully this helps and I apologize I didn’t make it more clear.

[@kyledillman5257]

@@InTheShop thank you sir that does clear things up

[@trife78]

I prefer the clearance plus I have a Mag-hytec trans pan which takes advantage of the air flow underneath to help cool the trans fluid.

[@InTheShop]

Yeah absolutely if you need that airflow. My truck is a manual transmission so that’s not an issue for me.

[@TheVenom8343]

What kind of mileage does that rig get? I've got an 04 6.0 Regular Cab, LWB, 4WD, 5R110 and I get between 13-15 MPG empty with mixed highway/city driving. At 55 MPH though, I got 20.94 on a test I did. Towing my 30 Foot camper, I get between 9-11 MPG.

[@InTheShop]

To be honest I’m not sure. It hasn’t been on the road yet since I got it. I’ll be sure to make a video about my fuel economy once it’s done.

[@TheVenom8343]

@@InTheShop And I'll watch it brother!

[@gabewall7381]

Looks great. Where’d you get all the other front end parts? Grille/bumper/header panel /lights?

[@InTheShop]

They are all used OEM Harley truck parts. A friend of mine buys and parts-out superduty trucks from 05+

[@gabewall7381]

@@InTheShop Do you happen to have his contact info lol

[@jimmywubbolt1722]

Looks good nice work👍

[@InTheShop]

Thank you!

[@fagan327]

Any reason you didn’t use the 6.4 (08-10) air dam? Curious if there is a difference.

[@InTheShop]

I like the look of the 11-16. I’ve never tried the 08-10

[@wilsonsantiago9235]

hi a question how did you lower the truck

[@InTheShop]

DJM suspension 3/5 drop kit.

[@spencerc.3532]

Will this work on a 2003

[@InTheShop]

I’ve never tried. The bottom is a little different. Might be able to make it work though.

[@marianomachado3631]

I like the look awesome

[@nestorenriquehuerta6309]

Yes Sr

[@micahperrotta6501]

Loving all the work cant wait to see these new videos of her on the street. Would this Valance work on my 2004 F250? Id assum some rigging would need to be done

[@danieldodd191]

Can I buy your old one?

[@InTheShop]

I mean shipping would probably cost more than it’s worth

[@mont8042]

Sorry but most truck guys on this side of the border like our tru ks raised not lowered

[@matthewmcbride3025]

good thing this isn’t a lifted yeeyee truck but rather a truck meant for the track