Replacing worn out track bar ball joint on a 2015 F350.
Пікірлер: 52
@unassignedvlog5556Күн бұрын
Nice instructional straight forward, showed all issues with no BS rambling!
@royjimenez67896 ай бұрын
Ford Company need to pay us money we are driving Fords with to much problems
@kevindunn175 Жыл бұрын
Use a slightly bigger cup so the boot doesn’t stick to the inside of the cup when you take it back off maybe? Need to do a whole front rebuild on my 03 king ranch suspension.
@raincitywrench11711 ай бұрын
Yea, exactly. Same thought I had.
@nicholasdonin14653 ай бұрын
Bigger culprit for death wobble too!
@drostly32204 ай бұрын
I think when I did mine.. I had to have an angled cup to drive in the ball joint.. 08' 350 dually..
@marksheridan7841 Жыл бұрын
Super helpful! I'm paying a pro to do it!
@raincitywrench117 Жыл бұрын
👍 Without the proper tools, it's almost impossible.
@gaelewis6623 Жыл бұрын
The orange obsorber with bumps on it?
@darrylt10312 жыл бұрын
great video....thanks for showing the remedy for the dust boot re-attachment....just goes to show...even the best mechanics run into "snags" now and then....cheers..
@raincitywrench1172 жыл бұрын
Oh boy, I run into a lot of "snags". LOL
@langmussen31693 жыл бұрын
Stellar!
@rconcord92 жыл бұрын
Very good video ! Thanks
@turbof3502 жыл бұрын
Finally a CE course that had my total attention. Very good speaker and such useful information. I plan on watching it a second time to get this engraved into my brain.
@AZWSM4 ай бұрын
Great Video. Thank you for sharing. Getting ready to do this. Looking for a press i can buy that will do it without the price of the OTC one. Haha.
@raincitywrench1174 ай бұрын
Check your local parts house, Napa, Oreillys, etc. They probably have a ball joint press set you can rent.
@chekelley68613 жыл бұрын
Great tip! It seems like that should rarely wear out!
@buddymartin79232 ай бұрын
Awesome video thank you? What was the music?
@raincitywrench1172 ай бұрын
Thank You! Can't remember, just something random off Epidemic Sound.
@stuartbrock7586 Жыл бұрын
they said you should tighten the one bolt when the truck is on the ground.
@Bill-ts9zv2 жыл бұрын
Very good
@richardweidner70368 ай бұрын
Great job thank you
@R1Brooklyn6 ай бұрын
Cool video. Nice video angles, are you wearing a gopro on your head or chest?
@raincitywrench1175 ай бұрын
I'm using an ORDRO head mounted camera. The audio stinks so I don't use it anymore 😢 www.amazon.com/Wearable-Camcorder-Hands-Free-Stabilizer-Included/dp/B08FDBB76K/ref=asc_df_B08FDBB76K/?tag=hyprod-20&linkCode=df0&hvadid=475811286124&hvpos=&hvnetw=g&hvrand=5913486307629774678&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9033404&hvtargid=pla-1181766343647&psc=1&mcid=1b553ee2ff9330339972525372685249&gclid=Cj0KCQjwiYOxBhC5ARIsAIvdH52brgN0f16E-HapGVAYQMSoUjnS0Y-TYclIkY8vUMzJXvnrDiryXFYaAhIKEALw_wcB
@Lance-Scaping5 ай бұрын
Does the truck need to be lifted when doing this or can I leave it on the ground?
@raincitywrench1175 ай бұрын
It can be done on the ground with the tires still on or you can jack it up on stands to get a little more room working on it.
@juanchavez7152 Жыл бұрын
Can’t wait until you replace the opposite side of that bar I think it’s a small metal rubber bushing great video
@RichardJaehnigen Жыл бұрын
In my opinion the bushing was much easier than the ball joint. I had to cut my ball joint out with a torch.
@azcharlie20093 ай бұрын
This job might be better left to a pro...
@raincitywrench1173 ай бұрын
You can rent the ball joint tool but yea, not the easiest repair.
@scenicroutetravelers3655 Жыл бұрын
Would this issue make the truck "walk"?
@raincitywrench117 Жыл бұрын
Definitely. It could still have another issue like overinflated tires or other loose components. With the truck running in park, have someone rock the steering wheel back and forth and take a peek under the front to see if something is obviously loose.
@tylerdunn65782 жыл бұрын
Destroy it and you will have no other reason but change it
@raincitywrench1172 жыл бұрын
Pretty much
@wejaith32 жыл бұрын
Which otc kit is that? Great video!
@raincitywrench1172 жыл бұрын
This is the set I have: www.amazon.com/OTC-Tools-6530-Service-Kit/dp/B000O1C396
@Guillotines_For_Globalists2 жыл бұрын
@@raincitywrench117 Is that the "long reach" size or are they all the same?
@chopone211 ай бұрын
Some packages have a plastic cup used to drive the boot on after pressing the ball joint into place.
@Hugobosz992 жыл бұрын
What is that dodge (cup dye) for the press what cpuld I use instead
@raincitywrench1172 жыл бұрын
I bet you could find a cup or sleeve that would work out of most ball joint press sets like this one from harbor freight: www.harborfreight.com/ball-joint-service-kit-for-2wd-and-4wd-vehicles-63279.html?campaignid=12144811130&adsetid=117789282878&product=63279&store=52&gclid=Cj0KCQjwvqeUBhCBARIsAOdt45aJT2uXfs5cZtbR89Nad-IapOgu3hPczTodBl1s-WgsZ2VgKbgR4CUaAqGkEALw_wcB
@mike1567 Жыл бұрын
Is this a reason why lofted trucks sometimes drive weird/sway/float on high speed?
@raincitywrench117 Жыл бұрын
Definitely. If a drop down bracket isn't installed on the driver side of the track bar then that will also make the truck wander around & drive like crap.
@ryanegbert117011 ай бұрын
Can you elaborate more on this bracket? 2011 F350
@matteckert6676 Жыл бұрын
So if you dont have those cups is there another option? Would hate to spend money on something i will probably never use again
@raincitywrench117 Жыл бұрын
Replacement will be tough without the cups. Renting a ball joint service set would be a great option.
@71usmc9 ай бұрын
Use a big socket 😊
@lalozichlids3245 Жыл бұрын
Could this be causing death wobble?
@Kyle-fu6en Жыл бұрын
Definitely
@raincitywrench117 Жыл бұрын
It could. Do you have any suspension modifications? If so then check the alignment. Too much negative caster will cause death wobble also.
@lalozichlids3245 Жыл бұрын
@@raincitywrench117 yes, 6 inch rough country lift
@gaelewis6623 Жыл бұрын
What's the Orange bushings on frame chasy called in your video?