Great video. It's the first time I am going to do my brakes on my camry, but I have done plenty of brake jobs. The only thing I would suggest is putting anti seize where the rotor comes in contact with the wheel bearing and the rim. Makes it a lot easier to remove the rotor next time. Great job though.
@OEMEangg3 жыл бұрын
thanks for the tip
@scottsmith8909 Жыл бұрын
Good video, going to put front pads on my 2017 Camry that we bought new. I’ve put lots of brake pads on but I wanted to maybe learn some tricks on the Camry. Thanks!
@arminsmajlovic4823 күн бұрын
Next time put some grease before rotors mounted , prevent rust developing…
@Loki2Mira2 жыл бұрын
Great video thanks. Just did our brakes. Was going to do rotors also but I couldn’t get them off even hitting with a hammer. Guess their rusted on. I will do them later on and just soak them with some blaster.
@ethanfarkas4190 Жыл бұрын
was your e-brake on?
@BetterTrue3 жыл бұрын
Neat video ... perfectly shot clear and simple explanation.
@OEMEangg3 жыл бұрын
thanks.
@BurtBowersАй бұрын
Well done video buddy, glad you shown included first step of doing brakes is opening the Master cylinder cap letting it lay ontop of the master cylinder reservoir, i seen lot videos out here on other channels they never mention or show doing this whichbis very important doing this, thanks for the posting👍
@OEMEanggАй бұрын
This procedure was taught in school back when I was a young lad. LOL. Thanks for the comment.
@josepgutierrez223 жыл бұрын
A 2016 Toyota Avalon break change should be pretty similar to this right?
@OEMEangg3 жыл бұрын
Yeah, most brake jobs are similar.
@SheikShak Жыл бұрын
Thanks….will do mine…..
@poohmaster543 жыл бұрын
Could I use the brake and caliper grease in place of the silicone paste? I'm also wondering if I can just loosen the bleeder screws as opposed to using the C-clamp to squeeze the pads?
@OEMEangg3 жыл бұрын
I'm not sure if you can use the caliper grease in place of silicone paste. Yes, you can open the bleeder instead of compressing the piston. Just make sure air is not going to enter the brake system by using the "bottle with a tube filled with brake fluid".
@littlerascals65292 жыл бұрын
Great video,thank you!👍
@giurbitser Жыл бұрын
Thank you excelent
@riasat0013 жыл бұрын
No rust
@g2nut434 жыл бұрын
Where did u get the nice flip flops from ?
@OEMEangg4 жыл бұрын
LOL... That guy is not me.
@SeorgeGoros4 жыл бұрын
This is by far the best brake pad installation vid I have seen. Very informative and clear
@OEMEangg4 жыл бұрын
@@SeorgeGoros Thanks for the comment. Some have told me I give too much info.
@SeorgeGoros3 жыл бұрын
@@OEMEangg whoever complains about too much info when it comes to working on a car is a fool who shouldn’t be taken serious
@OEMEangg3 жыл бұрын
@@SeorgeGoros Thanks for the comment. I really appreciate it.
@hcag22 Жыл бұрын
Do you have to perform a brake bedding-in procedure with these OEM pads/rotors?
@OEMEangg Жыл бұрын
No need for bedding. It is recommend to drive and brake smoothly for the first 100 mile or so. Avoid sudden stops. (BUT of course if it is an emergency, by all means, hit the brakes.)
@Loki2Mira2 жыл бұрын
Just have another question? I was able to change the brake but I guess the rotors had kinda rusted. I tried hitting the back of them with a hammer and they didn’t move at all. They don’t have any of the set screws in the front. I’d there s trick or something I am missing
@OEMEangg2 жыл бұрын
I have a video for brake job on a Toyota Highlander. In it, I show how to take off a rusted rotor. You will need to get two bolts. You can start the video around 3 minutes in. kzbin.info/www/bejne/rajOpmdnhK6Im6M
@Ddcash3003 жыл бұрын
Great video.
@luisgastelum83072 жыл бұрын
Why would you skip when you put the pads on
@riddit_stories972 жыл бұрын
What is the name of the first tool you are using in squeezing the caliper
@riddit_stories972 жыл бұрын
And also where I can get it thank you
@OEMEangg2 жыл бұрын
@@riddit_stories97 Some people call it a caliper compression tool or a disc brake pad spreader. You can buy it online or any auto parts store. Below my video is the description. Click on “SHOW MORE”. I list some of the product and tools I use.
@Blank_PK Жыл бұрын
He’s asking about the c clamp, I know this is old but for anybody in the future coming across this it’s a c clamp
@B-S19992 жыл бұрын
Is it the same as 2017 Camry hybrid
@OEMEangg2 жыл бұрын
I'm not 100% sure but I believe it is the same.
@colochona812 жыл бұрын
Don’t see how take out rotors !! 🙄
@OEMEangg2 жыл бұрын
At around 3:18, you take off the 2 bolts holding the caliper bracket. Now, there is nothing holding the rotor. You can just tap out the rotor. At 3:48, I point to where I tap out the rotor. Sorry about that. I should have recorded that part also.
@mattt96343 жыл бұрын
5 in c clamp?
@abrahamromero98783 жыл бұрын
Where do you bought the brake rotors
@OEMEangg3 жыл бұрын
You can buy them from Autozone. They also sell them at O'Reilly Auto Parts or Pepboys.