2012 Chevy Impala - ABS Trouble! Diag & Fix!

We have here a 2012 Chevy Impala that every time you turn the wheel, the traction light comes on, and the car starts beeping at you. Hope you enjoy!
#diagnostics #mobilemechanic #topdon
Get a TopDon Phoenix Elite Here!
www.topdon.us/...
Check out my Amazon Store!
www.amazon.com...
Disclaimer:
Due to factors beyond the control of Advanced Level Diagnostics, I cannot guarantee against improper use or unauthorized modifications of this information. Advanced Level Diagnostics assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Advanced Level Diagnostics recommends safe practices when working on vehicles and/or with tools seen or implied in this video. Due to factors beyond the control of Advanced Level Diagnostics, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Advanced Level Diagnostics.

[@dtandfam8100]

Nice fix. Your style is awesome, no BS just Straight to work! Thanks for sharing!

[@advancedleveldiagnostics]

Thanks for watching!

[@8power0]

OUTSTANDING ,,,,,,,,, WE MUST IF ITS POSSIBLE ,,,,,,,,,GET A VIDEO OF THAT MOBILE WORK BAG LOOKS AMAZING THANKS FOR THE GREAT VIDEOS !!!!!!!!!!

[@advancedleveldiagnostics]

Great idea!

[@billrimmer5596]

Super good vid!! Man that truck is EQUIPPED!! Everything but a donut deep fryer

[@advancedleveldiagnostics]

lol I even have a coffee maker

[@ronaldbrosius7488]

Awsome job, keep up the great jobs, and keep the videos coming

[@kyletuttle9064]

Cool diag and repair.thanks for sharing.keep the videos coming.

[@advancedleveldiagnostics]

Thanks, will do!

[@gilron9585]

I thought it is going to be harder after the welcome to hell greeting :)

[@advancedleveldiagnostics]

Lol me too!

[@saiautorepairs]

Very common issue on the older gms. Good good fix. Thank you for sharing.

[@advancedleveldiagnostics]

Thanks for watching!

[@agostinodibella9939]

When you think of how many times the wheels bounce over bumps and steer while driving, I am surprised this doesn’t happen more often. Those harnesses take a lot of abuse.

[@advancedleveldiagnostics]

Good point!

[@kingkutz247]

You did your thing on fixing the car. I need your contact information. My 2013 Chevy impala has some issues that need fixing

[@DavidPham911]

Thanks for sharing it w/ us your works. I hope your channel will take off. I’ll for sure show these to my co workers and classmates when I have a chance!

[@advancedleveldiagnostics]

Thanks!

[@DavidPham911]

@@advancedleveldiagnosticsquick question, I’m planning on getting that Milwaukee solder gun, but I’ve seen some bad reviews online. Is it actually good and reliable. I’ve owned a lotta Milwaukee and never had problems so. Thanks a bunch

[@advancedleveldiagnostics]

@@DavidPham911 I did have to warranty it once because it stopped working, but other than that, I've had no problems in over 2 years.

[@calholli]

TSB for the win

[@williamwhite9767]

Quick diag! Congratulations!

[@advancedleveldiagnostics]

Thanks for watching!

[@danthefisherman4793]

Great Video... I have watched all your impala videos trying to fix my Intermittent issue and thought i had it fixed, but it came back this morning, 03-14-24, after 6 weeks... Could that Broken wire cause the instrument gauges to go wonky, warning chimes to go off, Service Stabil and Traction Control lights, ABS LIGHT, CHECK ENGINE LIGHT , Locks going off and On.. And when it happens, it either goes into Reduced Engine Power or It allows me to go faster than limp but the shifts are HARD.. Dealer had it for 3 weeks and couln't duplicate it... This one is the Demon Car.. POSSESSED!

[@danielochana2145]

Can we get a truck tour please

[@advancedleveldiagnostics]

In the plans

[@themechanic6117]

Nice fix , I've repaired a decent amount of those . Those harnesses always go bad . I find it interesting that the tech there couldn't figure out such a simple problem... that's non of my business though lol

[@advancedleveldiagnostics]

I think he was thrown off by the communication codes in the beginning because the module was not properly plugged in.

[@themechanic6117]

@@advancedleveldiagnostics ahh I see 👍

[@Malikamos1]

So i replaced these and the lights were off for about 20mins then came back on any ideas why?

[@ktcarroll4723]

I had a car years ago from a body shop setting a abs rf code I would clear it and when I would close the hood it would come back on immediately I was a newbie so I replaced sensor ( wire connector under hood light out close hood light on 😅 freaking body shop had hood light and abs connector crossed same connector imagine that

[@eddiereichel9354]

On GM with those stupid questions in the scan tool when your logging in I am not certain but In the past I have selected the wrong ones and it didnt change anything that I could tell.

[@advancedleveldiagnostics]

Good to know!

[@raphaelbalachsan4764]

Like your content. Keep it rollin. Is Alldata your go to? 👍🏽

[@advancedleveldiagnostics]

Yes I find the diagrams are set up the best.

[@raphaelbalachsan4764]

I use identifix and im not very happy with the diagrams and pin diagrams. Thanks for replying i nay try alldata instead. Cheers

[@jdtractorman7445]

Nice fix. How do you like the Top Don scan tool? I'm thinking of getting a new scan tool and was looking at different brands.

[@advancedleveldiagnostics]

I'm very happy with mine; I am having issues with the Secure Gateway module on Chryslers. Officially they fixed it but last time I tried it was not working.

[@nobonespurs]

the wire needed to save your life is easily broke, what a piece of SHIT GM made

[@jameslewis1175]

Always an actuator in an impala

[@advancedleveldiagnostics]

💯

[@zoharhagbi6685]

❤

[@Max-j2r]

❤❤❤❤❤❤

[@mikeburdi3464]

Nice quick fix! "Welcome to hell" I guess that poor tech didn't realize just who he was talking to! LOL. Hey, btw, I was wondering what your thoughts are on this proposed NASTF and VSP nonsense. I didn't realize that it's apparently been a thing here in Canada for a few years but never enforced. Enforcing this is going to ruin a lot of good honest shops or mechanics. Just my opinion, curious to know what you think. Thanks and take care!

[@advancedleveldiagnostics]

I agree with you, I don't think they thought it through. They thought they were only getting rid of the bottom feeders but there is countless legitimate shops that are losing out. Have no fear someone will take over autels place in the aftermarket that won't require it. Where I live to get key codes you need an actual locksmith license which requires a two year apprenticeship at a locksmith, so it's not really an option for a technician.

[@jamespatton3720]

The problem is that it’s a Chevy Impala,the fix is to junk it.

[@advancedleveldiagnostics]

🤣

[@viplegaleducation1292]

It’s the wire to the sensor I bet

[@advancedleveldiagnostics]

💯

[@jameslewis1175]

Gotta be pulling on the wire. Incorrect routing?

[@advancedleveldiagnostics]

I don't think so, There was a TSB about it so it seems it happens over time.

[@stevensnyder5332]

Is Frank Zappa still alive?

[@tg2919]

Franks channel is advance level auto, you are watching advance level diagnostics

[@calholli]

Keith Defazzio is "New level Auto.. another Master

[@nobonespurs]

jumpy video