2013 - 2016 Cadillac XTS How To Program A Remote Key Fob - How To Add Smart Keys

[@SteveGangwal]

I have a 2013 XTS Premium. I bought the spare key fob on Amazon for $25 (rectangle shape with 5 buttons) and followed this video. None of the messages appeared on the dash, but it still worked like a charm. Many thanks for posting this. Saved us over $300!

[@PYR-Auto]

You're Welcome! Glad it helped

[@richardcounts5980]

This was so direct and simple, unlike most of the other's, Thank you !

[@PYR-Auto]

You're Welcome! Glad it helped

[@edwardlawrence6250]

We bought key FOBs in the aftermarket from 2 different suppliers on Ebay for our 2016 Cadillac XTS. None of them would program following the exact instructions in this video and other websites. We would get to “ready for key 3" and then press the start button to program but nothing would happen. It would just freeze. Finally we discovered that putting the replacement FOB in the console pocket upside down (pointed end on top) with buttons still facing backward worked perfectly. After failing 20 times, we we quickly programed 3 new keys. If the normal way does not work for you, try flipping the replacement FOB upside down!

[@alimora6874]

Hello! I’m trying to buy a new key fob even from the after market but I’m not sure where to buy it can you pls send the link to where you bought it or where?

[@withoutname6639]

This also worked for me

[@Joemomma48]

Thanks, mine would not work until I seen your comment. Worked great once I flipped the fob upside down.

[@richard.delgadillo]

This process worked for a 2015 Escalade ESV. The replacement key purchased from Amazon $35 for 2. I programmed both in 3 minutes. Thank you!

[@UrbanKnight777]

Worked Great for my 2015 Cadillac ATS. Although the key slot holder in the armrest is positioned differently, once you figure it out, worked like a charm. Thumbs up!

[@PYR-Auto]

Glad it helped!

[@chrisbryant6950]

This was the fastest and simplest method. Thanks a lot straight to the point💪🏾💪🏾

[@PYR-Auto]

You're welcome! Glad it helped!

[@3SageDesign]

i bought a new key fob on Amazon and used the procedure to ADD a smart key and it works like a charm.

[@PYR-Auto]

Nice!

[@3SageDesign]

Your procedures work PERFECTLY. A+ Saved me a small fortune. THANK YOU

[@PYR-Auto]

You're Welcome! Glad it helped

[@anthonyquintana9642]

Did this one a 2018 it still worked

[@robertshone5334]

This worked great and was very easy. His instructions are perfect!

[@PYR-Auto]

Thanks! Glad it helped

[@JGowins65]

Worked great! Grabbed the fob that I haven't used in a couple of years. Battery was dead, replaced the battery, no joy. Watched your vid and followed along. Worked great. 2014 XTS4 Premium. BTW, I never knew that keyhole was there.... always wondered where the backup key was to be used.

[@PYR-Auto]

Glad it helped!

[@alsteadforbes1841]

Thanks very much for your instructions. They worked for my purchased keys for a 2014 CTS.

[@PYR-Auto]

You're welcome! Glad it helped

[@jamesmorris2411]

Todd I was able to successfully program my new key fob using the procedure on the video.

[@jefflewis2480]

2014 XTS really works perfect, saved alot of money.ty

[@PYR-Auto]

Glad it helped

[@PatriciaHaggerty-il5dv]

Yes you are correct. You have to put the new key in upside down for it to work.

[@davidjennings8758]

Great video!!! Who would have thought it was so easy? Thank you.

[@PYR-Auto]

You're Welcome! Glad it helped

[@neelsbrits5993]

Thank you so much! You explained everything so simple and easy.

[@PYR-Auto]

You're Welcome!

[@3SageDesign]

Wow, what a fast reply. Thanks. If I understand your other video as well, I can program the replacement (3rd) more easily since I still have the first and the system will then recognize the new one as #3 but the ATS only has two saved personality settings. When the dash confirms that the 3rd fob is #3, there is probably no way to tell it that you really want to overwrite the old #2. But that would be too easy. So my best bet is to use the procedure you have noted below with fob #1 and it will be saved as #1 with no others programmed. Then I can use the procedure to program the new #2 given that I have a working #1 ONLY. Yes? Alan

[@PYR-Auto]

correct

[@wall_st_reviews159]

Very helpful thanks a lot and you have saved me at least $200

[@PYR-Auto]

Glad it helped!

[@DraSmithEnt2002]

Also thanks for this very informative video. It was great and understandable

[@PYR-Auto]

Glad it was helpful!

[@59ozzi]

thank you for that will that same procedure work for an 2015 ATS

[@PYR-Auto]

a 2015 ats is very similar but you put the recognized key in the cupholder. You can find those instructions here www.programautokeys.com/classified/2015-cadillac-ats-ignition-transponder-chip-key-programming-instructions-listing-9600.aspx#.ZCNSwi-B2w4

[@davidresar8256]

Excellent video! Thank you so much for sharing.

[@PYR-Auto]

You're Welcome!

[@sabbiralmasum5223]

Thank you so much. Saved me a trip to dealership and having to pay them.

[@PYR-Auto]

You are welcome!

[@DavidGatson]

Worked the first time 2016 SRX. Worked exactly as advertised. Thanks

[@PYR-Auto]

You're Welcome! Glad it helped

[@nuwagabaaggrey2697]

Didn’t work on mine I don’t know why

[@deborahwalker4229]

Thanks 😊 it worked for our 2014 XTS going by the exact directions 👏 🙌

[@PYR-Auto]

Great to hear!

[@unoestilo]

My 2013 cadillac xts4 was done in the same process as you explained but I did not get any type of visual message on my dash screen. But it work, so thank you

[@PYR-Auto]

You're welcome!

[@cbones3346]

My 2013 XTS was the same way. No lights whatsoever or message on the dash but I went through the process anyway and it programmed my fob.

[@boboypascual750]

Unfortunately i lost one remote keys for my Cadillac CT6 2017. I have the other working remote key at present. I bought another remote key. How can i program or add the new one . Any suggestions please.

[@garyprentiss6252]

It took a few tries but, it worked eventually, thanks

[@PYR-Auto]

You're Welcome!

[@Mr.D.O.A]

Thanks a lot I just did it on mines 🎉💯💯

[@PYR-Auto]

You're welcome!

[@BradSlack-s3w]

Hello does this program the fob to recognize the user set seat & mirror position

[@LyndaHoffman]

newfob is installed and working. Thanks. The old remote that I use doesn't work any more. A new battery didn't fix it. How do I get the old remote off my car and the new one to be recognized so my seat placement works.

[@LyndaHoffman]

I have a ats 2014

[@dimakushnir7506]

Can I use the same programming procedure on my 2020 Cadillac XT6?

[@DraSmithEnt2002]

Almost forgot, I have a 2017 cadillac XTS With only 1 key fob!. So with that being said, I've purchased 2 new fob's!& need to program them, I hope that donations are welcomed for your help! & Thanks again. Sincerely

[@D2theGRecords]

I have the rectangle keyfob 2014 xts will the one your showing work and if so can you send link of part number

[@dex5652]

Have you found the key fob? I wanted the same one lol

[@Eaglemade]

followed your instruction.. key works but says remote left in vehicle , any way to fix this?

[@nicoj32]

Hey do you know how to do it for the LCD dash I’ve tried and once I got it to pop up on the dash where is said ready for remote 3 but I did it wrong and now I can’t get it to pop back up maybe because my display turns off in a matter of a few seconds

[@dannytorrez1800]

dose the Cadillac srx have that pocket to put the key fob in, and if not were can you place the key fob. thank you

[@edgarmonzon1188]

Thank you quick and simple explanation. I subscribed

[@PYR-Auto]

Thanks for the sub!

[@steind01]

worked on a 2015 Buick Verano perfectly, took about 3 minutes.

[@PYR-Auto]

Great!

[@Awesome_adventure_fun]

hi, I see you have another similar video, my question is, I have a 2020 chevy equinox, I bought a new key fod with the remote start button, If I do these steps to program the key fob, will the remote start function works? do I need to do another programing?

[@PYR-Auto]

a 2020 Equinox requires 2 working remotes in order to be able to add a third yourself - you can find those instructions here www.programyourremote.com/classified/2020-chevrolet-equinox-keyless-entry-remote-fob-smart-key-programming-instructions-listing-9858.aspx

[@PYR-Auto]

Thanks for watching

[@jufegar]

Thanks!!! Is the same procedure for a 2016 Escalade? Adding a second ley fob. Thanks

[@PYR-Auto]

A 2016 escalade is very similar but where you place the keys is a little different. You can find the instructions for the escalade here www.programyourremote.com/classified/2016-cadillac-escalade-keyless-entry-remote-fob-smart-key-programming-instructions-listing-7492.aspx

[@ThePudgie123]

Success! Thanks! ....FYI, my 2015 ATS has a vertical fob slot...the right side appears to be flatter (buttons) and the left is more rounded (back). Correct me if I have it wrong.

[@PYR-Auto]

You're welcome! Good tip!

[@rodneygraham2928]

Ok, I've purchased (Amazon) a Aupoko Keyless Entry Remote Control NBG009768T, 5 Button 315MHz Uncut Insert Blade Car Smart Key Fob for my 2014 Cadillac XTS. I also have a working key fob. Not sure if it's the original fob, but it's very similar (visually) to the one I just purchased on Amazon. I didn't buy the car new, so any key fob info I didn't get; however, it's supposed to have a remote start system. My question is with the type of fob I just purchased, will the programming of it enable the remote start?? It doesn't work on my working fob, but again, I don't know if it's the original and/or if it's currently not programmed correctly. The goal is to have a fob with the ability to do remote start. How should I proceed??

[@PYR-Auto]

The remote start will only work on the fob if the vehicle is has the option installed, it sounds like yours may not. You can verify that by taking your VIN number and calling a GM dealership. Speak with their Parts Department - they can look up the original buildsheet for your vehicle and see what options it has

[@rodneygraham2928]

Ok, 2 things: 1) At step #5, the remote number does not advance (i.e. from remote #3 to #4) when I press the ENGINE START/STOP button. I've tried this step at least 8 times and it doesn't advance. 2) I confirmed with the GM Dealership that my model does have the remote start package and I'm not able to get the car to start on the working remote. Now what should I try?? Thanks

[@rodneygraham2928]

Ok, after further testing, I was able to figure out the remote start and was able to get it to work. Still having the issue w/ programming my 3rd remote/key fob.

[@PYR-Auto]

Step 5 is when the new remote actually programs, once the new remote successfully programs then the remote number advances. Since you are not getting the new remote to program, it sounds like there may be an issue with the new fob you are trying to use.

[@AlanKivnik]

2016 ATS. I lost the 2nd key fob but still have the 1st. I have purchased a new fob and want to program it as the replacement 2nd and delete access from the lost fob. Guidance?

[@PYR-Auto]

you can use the all keys lost procedure, which will erase all the fobs and then you can reprogram your original as well as the new one. The video for that is here kzbin.info/www/bejne/bKmrhWeVj5qLl7c . If you look at the steps in the description box of that video - you need to repeat steps 4-6 for the original remote after the new is programmed. Also, you need to start the procedure with the original remote far enough away from the vehicle so it cannot be read by the vehicle.

[@thedonjonpaul]

So I got this for my 2013 XTS and programming worked perfectly however, this fob has the 2X button for the trunk as opposed to the Hold button and does not work for the trunk. Do you know of a workaround for that?

[@PYR-Auto]

Are you pressing the 2x button twice quickly?

[@dirtynate01031]

Have 2 keys already programmed. If I add a third would I have to have all remotes in the car or just one to add the third

[@PYR-Auto]

Just one working key and then the new key

[@sathisp3221]

Could you please post similar one for 2019 , just to add additional key..

[@PYR-Auto]

A 2019 requires 2 working keys in order to be able to use a similar procedure to the one shown in the video

[@reginaldbrown7205]

I have 2013 XTS premium and after I turn counter clockwise five times within 10 secs while having the original working fob in transmitter pouch in console, I'm not getting anything on my dashboard. What am I doing wrong or what is the problem? Of course, I'm trying to my key fob #2

[@vetwitdajays8069]

I’m having the same problem

[@PYR-Auto]

Try just continuing with the procedure - some vehicles do not show the message or only show it very briefly

[@tommyd5642]

Just bought a 2018 cadillac dts with only one working remote. Do you have a video on adding an additional remote for my car?

[@PYR-Auto]

2011 was the last year the DTS was made but you can find all of our Cadillac programming instructions here www.programyourremote.com/classified/cadillac-make-138.aspx

[@BUNTY35]

@@PYR-Auto Thanks for information. but i am getting message ( remote learning in progress ) cant pass this message on 2017 Escalade

[@ligongroup]

What about 2017?

[@theodoredillard8995]

Can u add a key to a 2020 Cadillac Escalade and if so is it the same way

[@3SageDesign]

Curiosity question. I told a neighbor about my success in adding a replacement fob and he asked me what other GM cars and trucks work similarly. He has a small fleet of company cars and trucks and employees are constantly losing key fobs at great expense. Thanks

[@PYR-Auto]

many do but not all - you can check a specific vehicle here www.ProgramYourRemote.com

[@orlandopadron3327]

Thank you so much

[@PYR-Auto]

You're Welcome!

[@LA-jy8hq]

Used it on on a 2012 SRX, slightly different but it worked!

[@PYR-Auto]

Great!

[@tomcason5399]

Will this work with an aftermarket smartkey? Also how about a 2016 SRX? BTW Your video is very well done

[@PYR-Auto]

It can work with an aftermarket key. a 2016 srx programming is similar but you place working key fob in the cupholder - you can find those instructions here www.programyourremote.com/classified/2016-cadillac-srx-keyless-entry-remote-fob-smart-key-programming-instructions-listing-8608.aspx

[@butchkrueger7580]

Thanks!

[@PYR-Auto]

You're Welcome!

[@thomasgrandstaff6586]

I have the 2014 Cadillac ATS. The fob holder is horizontal not vertical in the center glovebox. Does the fob buttons face the drivers door or passenger. Thanks

[@PYR-Auto]

I believe it should work either direction

[@King-pu9jt]

Can I use this same procedure for a 2015 CTS? Valet driver lost my key fob and I'm left with just one now. I don't need 2 recognized transmitters to make this work do I?

[@PYR-Auto]

Yes - this procedure is the same on a 2015 cts with one working key

[@King-pu9jt]

@@PYR-Auto thank you for quick response!

[@Community_Guidelines1232]

I have a 2013 XTS platinum. Will this allow me to upgrade my key fob to the new style key fob?

[@PYR-Auto]

I've actually never tried that but I don't think it would as the two style fobs have completely different FCC IDs

[@gboyforlife616]

How come they have an upgraded version for the Chevy Silverado's from 2006 to change the key fob to a 2014 style wouldnt Cadillac have something similar since they are both gm ?

[@saraomar1899]

I just want ask how i can add more than 1 remote key to cts 2017 ?

[@PYR-Auto]

You can find those instructions here www.programyourremote.com/classified/2017-cadillac-cts-keyless-entry-remote-fob-smart-key-programming-instructions-listing-8578.aspx

[@steelhorseracing2745]

Hello, I successfully added a new fob to my ‘16 SRX, but the fob button for the back hatch will not work. The parking lights blink twice so it’s recognizing the fob, just won’t open the hatch. Any suggestions?

[@PYR-Auto]

Is that your only remote? does it work on any of the others?

[@MIkeBAKER1972]

I have the 2014 XTS, I followed the instructions exactly and the remote have to remain in the armrest to start. Also behaves more like a valet key. No trunk, remote start or window roll down. Any suggestions?

[@PYR-Auto]

Have you tried replacing the battery in the remote?

[@MIkeBAKER1972]

@Program Your Remote it was brand new remote. Also the new one is just a update remote

[@remigiuszjaskula6874]

I tried with my 2017 XTS I have only 1 fob and after 5 turns with the key does not appear ready for remote 3 but appear REMOTE LEARN PENDING, PLEASE WAIT instead of READY FOR REMOTE #2, 3, 4

[@PYR-Auto]

This procedure only works until 2016. A 2017 XTS requires 2 fobs to simply add a key. You can use the video below to program a fob to a 2017 - if you look at the steps in the description box of that video, you need to repeat steps 4-6 for your old remote after the new one is programmed as it will be erased kzbin.info/www/bejne/bKmrhWeVj5qLl7c

[@lamontcolbert7939]

Do I press brake pedal each time I press start button during this procedure ?

[@PYR-Auto]

No

[@yannicali]

Would these directions work for a 2016 Cadillac CTS V? Thanks.

[@PYR-Auto]

its very similar but the working transmitter is placed in the cupholder - you can find the complete instructions here www.programyourremote.com/classified/2016-cadillac-cts-v-keyless-entry-remote-fob-smart-key-programming-instructions-listing-8577.aspx

[@yannicali]

@@PYR-Auto Thank you so much for your help!

[@PYR-Auto]

You're Welcome!

[@rhsconsulting4367]

Will this procedure also work for a 2016 Cadillac ATS?

[@PYR-Auto]

Yes, it will

[@moeasim3587]

Would you know by any chance if it would be possible to program a key fob from the older 2014 model to the newer 2015 and up model fobs?

[@PYR-Auto]

I've never tried it so I can say for sure bit I don't believe you can

[@moeasim3587]

@@PYR-Auto thanks. I appreciate it. I wish they had different designs for each of their companies rather than the same key with a different logo lol

[@ricardoamgofficial5735]

Is it going to work for a Escalade 2015?

[@PYR-Auto]

An Escalade is very similar but the transmitter pocket is a little different

[@jimfleming3975]

Will this method work with a 2014 CTS? Thanks

[@PYR-Auto]

a 2014 CTS is very similar but where you place the key fobs is different. You can find those instructions here www.programyourremote.com/classified/2014-cadillac-cts-keyless-entry-remote-fob-smart-key-programming-instructions-listing-8566.aspx

[@rocketj6414]

Witch remote did you get

[@josedgoat]

does the new key fob need to have the key cut out like the original one ? Or it doesn’t matter ?

[@PYR-Auto]

it doesn't matter for programming - you can just use the cut key out of your original

[@lakiahawkins134]

Wonder if this will work with 2018-18 models 😬😬

[@PYR-Auto]

It's similar procedure on the 18 models but you need two working keys and you place the two working keys in the cupholder

[@wanjauBaron]

I just need to get the emergency key cut now.

[@jacobxonhughey7073]

Worked on 2014 ats

[@PYR-Auto]

Great!

[@JR-ig4wm]

will this work with 2019 xts?

[@PYR-Auto]

a 2019 XTS Requires 2 working in order to be able to use the add a key procedure.

[@Fatboyelvis]

I did everything but my dash never indicated anything although it did work just following the steps.2013 XTS

[@PYR-Auto]

Yeah some vehicles only the message for a couple seconds right when the door is opened - glad you got it to work though!

[@mplscarsales6652]

Should be the same for the ATS ?

[@PYR-Auto]

Yes, this will be the same for the 2013 - 2016 ATS as well

[@mplscarsales6652]

@@PYR-Auto wow thanks for the fast reply .greatly appreciated

[@jamilsmeir]

Hello sir, I send you a massage for a first video you done asking for programming a second remote for my cadillac SRX 2013, if you can help me or send me a link 🔗 for able to do it well without damaging the first remote. Thank a lot 👍 Best regards

[@sweetvette2000]

If you don’t know if it’s the original fob, could that be a problem?

[@PYR-Auto]

it shouldn't be - as long as the fob works you should be able to add new remotes with it.

[@countryboy5672]

Would this work for a 2020 cadillac xt4 luxury

[@PYR-Auto]

a 2020 Xt4 requires 2 working keys in order to be able to use this procedure

[@simonst-pierre9260]

Can i use a key that i ever had on other cadillac srx 2012

[@PYR-Auto]

It needs to be unlocked by someone with the correct equipment first. These key fobs lock to a vehicle once programmed.

[@vincentkeels658]

I have a 2016 ATS. Does the emergency key have to be cut before I program the Fob or does it matter? Thanks

[@PYR-Auto]

The emergency key doesn't need to be cut on the new fob order for the new fob to program but you will need at least 1 emergency key that is cut in order to do the procedure.

[@vincentkeels658]

@@PYR-Auto one thing i noticed is that the doesnt stand or lay it goes into a push in slot next to thepower key receptacle. Does the top of the Fob face the rear of the car or does the bottom of the fob. Thank You for previous answer, also.

[@PYR-Auto]

The transmitter pocket is in the center console like shown in the video - you can also see that in your owners manual. I faced the button to the rear but I think it may work either way

[@vincentkeels658]

@@PYR-Auto Thank you. I will give it a try and let you know

[@DavidGatson]

@@PYR-Auto My 2016 SRX, I laid my key fob in the pocket(bottom of center console) face up. It does not a "Slot" but a spot molded in the bottom of center console in the shape of Fob. The whole procedure took only a few minutes.

[@zkuhle]

What is different on the 2017. This did a total 30 minute reprogram of key one, but couldn't seem to get key 2 to do anything.

[@PYR-Auto]

a 2017 requires two working keys in order to be able to use this procedure

[@zkuhle]

@PYR-Auto thanks, right now I'm stuck with it asking for remote 2. I hold start for 12 seconds to exit so I can start the car, but it still asks every time. How can I completely exit it?

[@PYR-Auto]

@@zkuhle you will need to program a second remote in order to fully exit programming mode

[@zkuhle]

@PYR-Auto Catch 22. You said needs 2 remotes, and I only have one. It won't program the 2nd remote. Thinking I might have to resort to someone flashing it if I can't fix it.

[@quick9smitty511]

I need to reprogram my husbands key fob. Mine works-his does not. By trying to reprogram his, will I be erasing the one that works?? If first attempt doesn't work, how long do you have to wait to try again? In one of your comments I thought you said that by reprogramming, it will erase any working remote (by remote I assume you mean key fob?). Do you mean reprogramming erases previous programing on the remote that isn't working?

[@PYR-Auto]

This procedure does not erase existing fobs - there is a programming procedure that does erase all programmed remotes this one does not. The vehicle should stay in programming mode until you hold down the stop/start button for 12 seconds

[@faisalabdulaal1302]

Can I use this procedure for CTS 2015?

[@PYR-Auto]

a 2015 CTS is similar but you place the existing fob in the cupholder. You can find the exact instructions here www.programyourremote.com/classified/2015-cadillac-cts-keyless-entry-remote-fob-smart-key-programming-instructions-listing-8574.aspx

[@moonsungsong]

Can I program 2019 XT5 key? I have one working key. Thx

[@PYR-Auto]

You will need to use the video below. If you look at the steps in the description box of that video - you need to repeat steps 4-6 for your original remote after the new remote is programmed to re-program it. kzbin.info/www/bejne/i2mYhWakmqqfoaM

[@biancarosa8324]

My second key fob only work when it’s in the transmitter, any ideas ?

[@PYR-Auto]

have you tried replacing the battery in the key fob

[@biancarosa8324]

@@PYR-Auto honestly that is exactly what did the trick. Thanks

[@JonathanMarmolejo1]

Same procedure for an xts 2017?

[@PYR-Auto]

no - a 2017 requires two working keys in order to be able to use this procedure

[@haydenhull4515]

Would this work on a 2015 CTS?

[@PYR-Auto]

Yes

[@mikebrown8677]

Will this work on a 2017 XTS?

[@PYR-Auto]

No 0 a 2017 its requires two working keys in order to be able to use this procedure

[@gregmessmer9778]

Will this procedure work for a 2018 XTS?

[@ahmed19d25]

No you must have 2 to add the third

[@PYR-Auto]

That's correct that you need 2 to be able to add a third yourself on a 2018. The exact instructions for that can be found here www.programyourremote.com/classified/2018-cadillac-xts-keyless-entry-remote-fob-smart-key-programming-instructions-listing-8632.aspx

[@johnwatson4999]

Tried it. Now none of my fobs work and the car won't start. The lock and unlock functions, but that is all.

[@evvega7240]

This didn’t say ready for the remote 2-3😢 say waiting for red remote

[@Leumas211]

Bleep! 2015 CTS doesn't have same pocket. Just a cut out to lay it in inside armrest. Face up or down?

[@HomemadeTrailers1]

How do you change a key fobs assigned number?

[@PYR-Auto]

There is another procedure that I will link below that erases all previous remotes and the order in which you program them back in will determine driver number kzbin.info/www/bejne/bKmrhWeVj5qLl7c

[@zainevo]

I don't why but it's not working for my 15' ats

[@tednaman4683]

Thank you for the easy steps to program Cadillac remotes. I have one question: Does this procedure work for the 2017 Cadillac XT5?

[@PYR-Auto]

No - the 2017 XT5 requires two working remotes in order to be able to use the add a key procedure.

[@andrewryan6681]

@@PYR-Auto Do you have a video for adding a third key fob to a 2017 ATS that you have 2 working fobs for?

[@Shades742337]

Does this work with at 2017 CTS?

[@PYR-Auto]

No

[@Shades742337]

@@PYR-Auto it's nearly the same. Your video helped get me started. You can also review your owners guide and it has the steps in there as well!

[@PYR-Auto]

@@Shades742337 the big difference is a 2017 CTs requires two working keys instead of one - but glad you got it figured out

[@Shades742337]

Yeah! That part required some reading! Your other video about how to add a key with no other key was the closest to the Manual. A part I think that people should pay attention to is when you said you have to wait for 10min 3 separate times. To get to the point to add up to 8 new keys/remotes. But again, great video!

[@nakuldev7503]

Does this work for ATS 2013

[@PYR-Auto]

Yes, it should

[@nakuldev7503]

Thanks a lot...

[@mplscarsales6652]

Is this for ATS too or any Cadillac?