2013 - 2022 Ram ProMaster / Fiat Ducato Van Stereo Install

[@ProvoBeastAudio]

Parts used linked in the description of the video!

[@christopherburbidge972]

I have a good fiend converting a 2015 pro master van to a camper. They have the backup camera and rear bumper sensors all ready. They want to add two rear speakers. Everything we find is about the same...no wiring colors given, just a six plug adapter. What are the wiring colors at that connector for rear speakers!? I can’t believe that nobody says! Please help! We understand the engineering mode, but why would it not let us in wether there is a change of speakers or not? Engineering mode should come up no matter what, right!?

[@adrianmoon3396]

One question, what is the smaller white harness that gets abandoned for? USB?

[@j2b2man]

Also wondering this!^

[@davidgleza356]

Hi Provo, it's me again, my question is, is there any t harness for promaster ram with factory screen stereo, thanks

[@kenlash6887]

So the little white harness is for the usb and don’t need to be used correct. Amd what was the Volkswagen model number for this one. I also have a promaster amd and wanna swap the radio out.

[@vaspar9871]

You did show plugging the harness into the new radio, did you use the small white harness or not? and what is it for. My radio would loose power, if I pushed on the small white harness it would come back on, Unplugged it and stripped the sheath back and now it won't work at all. I have power to the 10amp fuse.

[@ormie07]

Did you figure this out?

[@vaspar9871]

It is for USB Ports. By the steering wheel. Did need it so just left it off. New radio works fine. @@ormie07

[@guyo9544]

I wasn't very clear about the type of adapter used to connect there, did you just crimp the wires from the original adapter or purchased an accessory one? also I like to know how to install a double din touch screen radio in this same exact single din radio profile and where do I get the parts for it. Thanks.

[@ProvoBeastAudio]

The description has all the parts used in this install. We didn't cut into the factory harness, instead we used the adapters. Just crimp together and plug and play. Now, if you are interested in installing a double din, you may need this kit: www.amazon.com/Metra-95-6523-Installation-2014-up-Promaster/dp/B00PR67H1C

[@guyo9544]

Already did some research and found out about this piece. But thanks a bunch.

[@Hanes-z2o]

Now get that headlight replaced since it is a promaster and surely there is one out

[@briangregory5413]

Have the same pioneer installed, how do i get it out? Meed to have cd fixed

[@ProvoBeastAudio]

Most likely will need single din keys to pull it out.

[@MikeRattle]

anyone have the original Rh3 factory radio for sale? the one for my van at work is missing

[@mikescott7247]

I installed the new unit radio works but there is no sound coming from the speakers checked the wiring multiple times and everything is the way its supposed to be.

[@ProvoBeastAudio]

Sounds like you may have a factory amplifier. Did you hook up the solid blue wire to your new radio?

[@samanthafrost4018]

yes I have the blue wire hooked up, still no sound. radio turns on just no sound at all

[@JohnnyDeep76.]

How do I direct wire the radio so when the key is off I can listen to the radio and not lose my stations

[@pierrecloutier9215]

is there a wire that goes directly from the tweeter to the radio ? ( so 4 speakers wire are used ?)

[@MRBurns-ti9lb]

Easy video

[@_WADE13x]

how about canbus support?

[@ProvoBeastAudio]

You can find support, but this ram has a analog accessory wire at the harness, so no smart harness really required.

[@_WADE13x]

@@ProvoBeastAudio steering wheel controls are canbus

[@ProvoBeastAudio]

@@_WADE13x Not in every case, but for this Promaster, if you want to retain steering wheel controls, you can use the Crux SWRCR-59D adapter.