2013 HYUNDAI ACCENT - HOW TO REPLACE FRONT BRAKE PADS & ROTORS - DIY

amzn.to/2LpDAaj This kit is for both front and rear brake pads & Front & Rear Brake Rotors.
amzn.to/2L6obdd Sil-Glyde Brake Grease
amzn.to/2ZgMMS7 Lisle Brake Caliper Compression Tool
amzn.to/2ZgLMNR Impact Screwdriver
amzn.to/31UWQ5a Tekton Long Handle 3/8"drive Ratchet
amzn.to/2T4l8aP GearWrench Torque Wrench Used in the video
Just a quick and easy video showing how to replace the front brake pads and Rotors on a 2013 Hyundai Accent. These pads weren't worn down too bad, but the owner is sending his kid off to college and wanted to make sure they were new and wouldn't give him any trouble while he is away. I also decided to re-install the outer shim this time. I have left it off in the past and didn't have any problems with it. Also, if you live in an area where vehicles are prone to rust, you might want to have a few of the replacement screws that hold the rotor on the hub available in case they don't want to come off.
I also made a video of how I replaced the rear brake pads & rotors on this same vehicle:
• 2013 HYUNDAI ACCENT - ...
Tools needed:
A large screwdriver or small prybar
14mm socket and/or wrench
17mm Socket and/or wrench / Breaker Bar
Large Impact Screwdriver
Hammer
Torque Wrench
Torque spec for the caliper bolt is 23 ft. lbs.
Torque spec for the Caliper Bracket bolt is 73 ft lbs.
Thanks for watching!
Please Subscribe!
-Dan the Fix it Man
www.danthefixitman.org
www.amazon.com/shop/danthefixitman
Song used in the video:
"Welcome" by Anno Domini Beats
As an Amazon Associate I earn from qualifying purchases.

[@rostislavkappel6553]

There is no better way to explain and show how to do it than this,man.TX

[@landshass2849]

Good camera angle, Enough light to see, Good voice instructions, No music. Good editing. What else I need?

[@Iliek]

Competency.

[@thaswayzeexpress]

Like 6th time doing brakes myself but different cars and rear in this car. Very good guide and pro tips! 👍

[@nicolaskuchta1072]

Gotta do this on the wife's Kia in the morning. I sure hope it goes as easy as it looks! Thanks!

[@nicolaskuchta1072]

Update: I followed your instructions, It went easy and smooth. Thanks again Dan!

[@sujaysoman]

Great informative video! Well edited and clear instructions. Going to attempt this job on my 2014 RB Accent.

[@robertschroeder8131]

Very easy to follow video Thank you for the step by step

[@jiygo]

Awesome man, thanks Dan! I would like to add we could look for the state of the piston and rubber gasket before pushing it in (once in a while), but not mandatory for a pads change! Thanks! And question: What are the reason why we should need to change the rotors, other than really juste the thickness?

[@kolbewhite3723]

Thank you

[@selenamasters53]

This might be a dumb question, sorry if it is I don’t know anything about car parts. I want to to change my brake rotors and fluid, but can I use degreaser or fabuloso to clean the clip and the rest of that part? Thank you for the video it’s super detailed and informative!

[@DantheFixitMan]

Hi Selena, Not a dumb question at all. I think it would be fine to clean the retaining clips with any type of degreaser or cleaner if you plan on using the old ones. Most brake pads come with new clips and hardware now, but I have reinstalled them many times in the past. Thanks for watching! -Dan the Fix it Man

[@marlonmagno7316]

Can you tell me, how long of your torque wrench, Its that 14 inches long?

[@liriel287]

Great video. I have a question, I don't have a torque wrench, if I use a regular wrench, is going to be ok anyways? I changed pads and discs before and I never use a torque wrench so I dont know if I had being doing it wrong. Tia

[@DantheFixitMan]

Hi Dan, I used to never use torque wrenches at all. Even in some of my earlier videos, I didn’t use them. I used to just make it good and snug without overdoing it and breaking bolts. I guess I used to go by ‘feel’ depending on the size of the bolt and I never had any problems in the past doing it that way. Best of luck to you! Thanks for watching, -Dan the Fix it Man

[@harold8483]

Very well done. Step by step.

[@DantheFixitMan]

Thx!

[@sujaysoman]

Great informative video! Well edited and clear instructions. Going to attempt this job on my 2014 RB Accent.