2013 Mazda Cx5 Lower Control Arm & Tie Rod Replacement

  Рет қаралды 18,917

Anything Auto

Anything Auto

Күн бұрын

Пікірлер: 48
@thorels
@thorels Жыл бұрын
Thanks for the video! Have to change the lower control arms on my Mazda 6 2013, and all the other examples I've seen on KZbin has been removed from cars with almost no rust etc and no problems removing the bolts. So nice to see a repair on a car that probably compares to my own after years of driving on salted winter roads 👌
@AnythingAuto
@AnythingAuto Жыл бұрын
That's the only reason I started my channel. Got tired of seeing that myself. i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.
@nhantranb.5172
@nhantranb.5172 10 ай бұрын
I feel like heating the low arm control while there are rubber element nearby is not a good choice. I would try spraying WD40 first.
@vegeta420z
@vegeta420z 4 ай бұрын
@nhantranb.5172 He did use WD40, several times. It didn't work. He also said keep a water bottle handy.
@SL-pg4dh
@SL-pg4dh 2 ай бұрын
@@vegeta420z it would if you have the luxury of letting it sit overnight
@SL-pg4dh
@SL-pg4dh 2 ай бұрын
Did bad lower control arm caused your steering wheel to shake at highway speeds?
@vegeta420z
@vegeta420z 2 ай бұрын
I learned all my car stuff off KZbin I did my front and rear brakes pads and rotors couple months ago. Then my outer tie rods went out and I decided to do the inner and outer tie rods, Had damaged grease boots on the swaybar links so I did those as well. When I went in for my alignment they told me that my lower ball joint, And some of my bushings on the lower control armwe're bad. So I still drove my car around for about a week and a 1/2 cause I didn't have the money to get the new lower control arms ( I know you can change just the bushings and ball join but I figured might as well just swap the whole thing out) My new lower control arms just came in the mail today, So going to swap them out tomorrow hoping and praying the bolts aren't stuck. I don't have an impact so just gonna have to get clever you some leverage breaker bars whatever it takes. Good video the only complaint on the video is I wish that you included torque specs. If I remember after I look up the torque specs I will post them here and FYI My vehicle is a 2013 Mazda CX5 sport.
@AnythingAuto
@AnythingAuto 2 ай бұрын
@vegeta420z6 well be glad you found my channel. I always have them come back so i Will more than likely have more coming. As far as your complaint, all torque specs are in the description. What are you missing? i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.
@alexeimakes
@alexeimakes 7 ай бұрын
Thank you for the video! Had a battle with the ball joints as mentioned so thanks for preparing me for that!
@AnythingAuto
@AnythingAuto 7 ай бұрын
i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.
@lawless_jeeper
@lawless_jeeper Жыл бұрын
Great explanation! I was thinking releasing the ball joint was going to be harder and need the air hammer. Now thinking I can do this one myself. Thanks
@AnythingAuto
@AnythingAuto Жыл бұрын
If I can do it you can do it. i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.
@rhagood2926
@rhagood2926 7 ай бұрын
Great video. Big thanks, doing this project for my daughter.
@AnythingAuto
@AnythingAuto 7 ай бұрын
i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.
@GetBusyLivin
@GetBusyLivin Жыл бұрын
I'm doing this job now! Did you have any trouble lining up the ball joints? Driver side lined up easily but for some reason the passenger is at a really tough angle and having a lot of trouble reseating it. Any tips would be greatly appreciated
@AnythingAuto
@AnythingAuto Жыл бұрын
I do them so often I can kind of judge the angle by looking at it so it lines right up with the knuckle. i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.
@klb1956
@klb1956 8 ай бұрын
I just did driver side last night on my daughters 2015. And I'm here to tell you lining up that ball joint was a PIA! I needed to move the car so I could close garage door for the night. I was abt to give up when I needed to get the wheel on and straight to roll it back. I removed the front bolt then inserted the ball joint. The front bushing did not reach all the way thru to insert bolt but bushing was in the slot. Put wheel on, lowered the jack and heard a clunk. Looking under at the front mount, it went right into place. Had to line up the bushing with a long punch but bolt went in and I tightened everything up. Now the passenger side is another day! Video makes it look so easy, when really it looked like the key in this video it turn wheel full left, align ball joint to knuckle. Guess I will take that approach on the other side and see how it goes.
@klb1956
@klb1956 8 ай бұрын
Anythingauto, The poster was asking for any tips, but you didn't offer any, other than your response of having done them so often you just know the angle. Don't see how that was helpful. Otherwise the video was great for us driveway mechanics.
@gfriedman99
@gfriedman99 2 ай бұрын
My ball joint came apart at the ball. Do you think its possible to get what's left of it out of the wheel or should I just get a new wheel?
@AnythingAuto
@AnythingAuto 2 ай бұрын
@gfriedman99 in your wheel? What the heck happened!?!? Send me pictures. i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.
@gfriedman99
@gfriedman99 Ай бұрын
Why is that ball joint pinch bolt grade 5? The head just snapped off without much torque. It should be a grade 8 bolt right?
@AnythingAuto
@AnythingAuto Ай бұрын
@gfriedman99 yeah have to take that time and heat. Like red hot. i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.
@philipkeeling8647
@philipkeeling8647 10 ай бұрын
my 2014 CX5 just failed roadworthy test here in Ireland for TRACK ROD END DUST COVER! Is that the same as a steering rack boot cover?
@AnythingAuto
@AnythingAuto 10 ай бұрын
Honestly I've never even heard if that. Sorry
@vegeta420z
@vegeta420z 4 ай бұрын
I'm still learning, and really know very little, but just curious why not replace that bolt on the lower control arm? After heating and beating on it, seems like replacing it would be a good idea. I just bought inner and outer tie rods for my 2013 cx-5 (shop told me it needed this, and looking at the boot on the outer tierods it definitely looks like it) but what is the indicator that the lower control arm needs replaced? Was it just the boot on the bottom looking rough? Or are there other indicators that this needs done? Also what would be the down side of drilling that bolt out?
@AnythingAuto
@AnythingAuto 4 ай бұрын
@vegeta420z6 bolts aren't cheap so replacing them when it's not necessary a lot of people will not pay it. If you Hammer the bolt correctly and clean it up nicely, there's no need to replace it. I am not sure how this bolt looked, but if it's all rusted out personally I would replace it. Control arms can move around which makes them bad or you can save your tires by looking at the rubber. Holes or tares or slight separation makes them bad. i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.
@zinnsand21
@zinnsand21 7 ай бұрын
Great Video. I too have a 2013 CX-5. Took it in for a front brake pad and rotor replacement. After road test the mechanic said he heard a light clicking and thought it might be a bad control arm. Didn't say which side noise came from. Said they would need to do a diagnostic test ($160) to determine.. Said the car is driveable.. Can't they just look at the control arm to determine? Appreciate any insight..
@AnythingAuto
@AnythingAuto 7 ай бұрын
It will be very hard to determine without a lift. I suggest trying out another shop. The fact that they are telling you all of that money just to diagnose is a little ridiculous so I would definitely try somewhere else. Clicking could be steut mounts. Control arm play. Jack it up and start feeling for any type of play. i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.
@CharlieJarxx
@CharlieJarxx 7 ай бұрын
That clicking noise is your drive shaft and the boots may have punchered or rotted . Water, rain and dirt gets in there but if you get to it soon enough you could save it
@SL-pg4dh
@SL-pg4dh 2 ай бұрын
They could check by moving the wheel from side to side for any play
@joseortega4771
@joseortega4771 9 күн бұрын
What are the torque specs for a 2015 Mazda cx5? I cant it anywhere.
@AnythingAuto
@AnythingAuto 9 күн бұрын
@@joseortega4771 hit that super thanks or super like button.and I'll look it up for you. i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.
@joseortega4771
@joseortega4771 8 күн бұрын
@@AnythingAuto liking it right now. I have my car up and already replaced the part yesterday. I’m just baffled on why I can’t find the torque specs anywhere . It’s very dangerous not torquing to specs and I don’t want to put my family at risk. Thanks for your help and happy holidays.
@mm32951
@mm32951 3 ай бұрын
Do you have the part number for the bolt that secures the knuckle and ball control arm?
@AnythingAuto
@AnythingAuto 3 ай бұрын
@mm32951 no, but hit that super thanks button and I'll look it up for you. i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.
@CharlieJarxx
@CharlieJarxx 7 ай бұрын
I'm not a mechanic or a technician but, where did the bushing go? I feel like more bushing like skateboard bushings with the caps on top and bottom. Could that work? Great job by the way
@markostermann6646
@markostermann6646 8 ай бұрын
Do you recommend an alignment afterward?
@AnythingAuto
@AnythingAuto 8 ай бұрын
100% yes. i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.
@RaFiStudiozOfficial
@RaFiStudiozOfficial Жыл бұрын
Thank you
@AnythingAuto
@AnythingAuto Жыл бұрын
i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.
@trevorandrew310
@trevorandrew310 Жыл бұрын
I was hoping to find out the torque on the bolts for the control arm, and if any of them are to be tightened down with the tire back on and on ground. Please help
@AnythingAuto
@AnythingAuto Жыл бұрын
I can't help you there. Order a manual and go from there. If i cannot get the info free i post it but some cars i cant get. i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.
@JuanCarlosNieves
@JuanCarlosNieves 3 ай бұрын
No le sabes
@AnythingAuto
@AnythingAuto 3 ай бұрын
@@JuanCarlosNieves i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.
@usmc2msu213
@usmc2msu213 8 ай бұрын
10mm 14mm 17mm 19mm 21mm (open end wrench) You’re welcome 😊
@AnythingAuto
@AnythingAuto 8 ай бұрын
i hope this video helps. feel free to like and subscribe for more & if you can, please help the channel out by giving a super thanks. Making these videos takes a lot of time, but we do it to save you hundreds. also head down into the description and check out the link for some high quality led bulbs for this and any other vehicle. use my referral for a discount. Add me in Instagram for behind the scenes pics and Stop by my store for some Anything Auto gear.
How to Replace an Outer Tie Rod End
6:27
ChrisFix
Рет қаралды 2 МЛН
Une nouvelle voiture pour Noël 🥹
00:28
Nicocapone
Рет қаралды 9 МЛН
Top 5 Problems Mazda CX-5 SUV 1st Generation 2013-16
8:22
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 601 М.
2013 Mazda 5 lower control arm replacement.
8:10
The Offroading Mechanic
Рет қаралды 9 М.
Advice to my 18 year old Self (On Tool Buying)
19:46
Tool Box Tours
Рет қаралды 197 М.
How To Check For a Bad Ball Joint/ Tie Rod/ Wheel Bearing
6:07
BIG WILL CAR CARE
Рет қаралды 46 М.
How to Replace a Lower Ball Joint (short, quick version)
9:27
ChrisFix
Рет қаралды 8 МЛН
Lower Control Arm Replacement | Good Vibes Only | Mazda 6 2014-2017
11:35
Mazda CX5 Front Brakes How to Replace Easy Job You Can Do Yourself
8:13
Mazda CX-5.  Тяги, наконечники, шаровые, сайлентблоки.
30:59
Мужская Территория
Рет қаралды 13 М.