2014-2018 Sierra 1500 5.3L K&N Series 77 High Flow Performance Cold Air Intake Review & Install

Shop this K&N Series 77 High Flow Performance Air Intake: amtrucks.at/30...
Subscribe for Daily Truck Videos: bit.ly/atcgrsub...
This K&N Series 77 High Flow Performance Cold Air Intake System is a free-flowing aluminum tube air induction kit designed to replace your entire factory intake system. It reduces airflow restriction by smoothing and strengthening the flow of air, allowing your 5.3L V8 engine to take in a larger amount of air than your old factory installation did.
A better airflow means more power and acceleration for your 5.3L Sierra. This system from K&N directs air through the intake tubing and into your engine's throttle body. The result is a guaranteed and noticeable gain in power.
The intake tube is built to last, featuring aluminum construction with a chrome-like finish. In addition, the cone-shaped, oversized air filter lasts up to 100,000 miles in standard driving conditions before you'll need to service it. The filter is washable and reusable, making it even easier to get the most out of your performance air intake kit.
Item S500136A
----------------------------------------------------------------
🎞Subscribe for Daily Truck Videos: bit.ly/atcgrsub...
Stay in the loop for other truck content:
Instagram: bit.ly/2pReXWs
Facebook: bit.ly/2pBz6AC
Twitter: bit.ly/2pRw2Q9
AmericanTrucks.com is your home for everything truck! Our team of experts is here to help you find the newest and top mods for your Chevrolet Silverado, GMC Sierra, RAM, and Ford F150!

[@AmericanTrucksChevyGMC]

Shop this K&N Series 77 High Flow Performance Air Intake: amtrucks.at/30ok8Qr Subscribe for Daily Truck Videos: bit.ly/atcgrsubscribe

[@steamhard]

I have done this and did a dual exhaust so worth it! Was getting 100 miles for a 1/4 tank. Now I’m getting 130

[@docholiday9786]

Did you need a tune afterwards or need to disconnect your battery to reset your computer?

[@steamhard]

Doc Holiday no. I didn’t have to do anything. Install n go.

[@docholiday9786]

@@steamhard thanks!! 👍

[@stephengabbert1254]

what dual exhaust did you do?

[@steamhard]

Masterflow with a K&N cold air intake with a pedal commander.

[@denvernuggets007]

Just got this in my 2015 Yukon Denali. Love the roar when I hit the gas pedal. Feel like there's actually more juices... lol

[@outlaw805]

I thought the same thing, I didn’t expect it.

[@xxonexx471]

Im about to install mine lmao, yall got me hyped

[@billstenger9848]

All I can say it im loving the intake and exhaust notes after installation, it looks good K&N did a great job on this I have the black one great bang for the buck all around great

[@hellwithit]

Okay perfect video. Well done 👍 But I want to give everyone a heads up! If you have a CAI on your truck- if you ever need to replace your M. A. F. S - Do not buy any sensors that are not manufactured by the original equipment manufacturer. ! Do not use after market sensors. Get the stock one the vehicle came with. !

[@Unkownuserguest]

Does this fit 2003 Cadillac Escalade 5.3?

[@kristoferfc6525]

the breather hoses are supposed to come all the way down too before you tighten the clamps

[@krisloring6571]

Post has been out a while but figured i wpuld write something. I have a 2017 silverado 5.3 v8...is there a way to make a box with cover to git over the air filter.. also the air filter is a oversized type air filter..the thing is huge, but you for sure can hear it sucking in the air..i just wasn't sure if i cpuld make it a closwd box system

[@MrMuneco1979]

Thank you, very helpful 👍🏼

[@ibeprophens]

Bought it for my texas edition 2018 Silverado and my coolant reservoir in the way lmaoo so gotta reroute that.

[@45coopaloop]

awesome video man! great in depth install

[@AmericanTrucksChevyGMC]

Thanks for watching, Jordan! We appreciate it! -Zach

[@norbertoruiz1996]

Will this one fit a 16 Chevy Silverado 1500 5.3 someone is selling one but from a 16 gmc Sierra 1500

[@outlaw805]

Super helpful video, made my installation easy peasy!!!

[@docholiday9786]

Do you have to worry about getting rain coming up from the roads or crack of the hood?

[@AmericanTrucksChevyGMC]

With how this guy is positioned in the engine bay, you really don't have to worry about rain from the road unless you plan on driving through some deep puddles or flooded areas. 😂 If you want to protect your filter from rain a little more though, K&N does sell filter pre-wraps! -Zach

[@ridingwiththereids]

I like the heat shield and Intake tube, but not the filter. I've had to many MAF problems with oil soaked air filters.

[@RHTR3s]

So what kind of air filter do you use?

[@ridingwiththereids]

@@RHTR3s dry filters. And I'm not bashing K&N. Usually if there is a MAF problem it's because the owner WAY over oiled the filter. But I've seen it. Plus people tend to install cold air intakes and never open the hood again. I can't tell you how many turbo's and engines I've replaced due to lack of filter maintenance. Just my $.02

[@injunboy89]

yeah i run dry AEM on my silvo too, its just a better safe precaution. tho a powercore would be the best bet

[@danarcotta1283]

what tuner do you recommend along with this intake?

[@buckshot21000]

How does it compare to the 63 aircharger? Got a 15’ Chevy Silverado 5.3L

[@canadianred6937]

Is there much risk to driving through heavy rain with this intake, I’m not talking about puddles, but in general?? I’m asking as I think my ‘17 Silverado 1500 will be fine with it on as it’s my daily driver and I live in Canada; but doesn’t hurt to throw the question out there.

[@franciscodelbosque1452]

I had an extra long hose and hose clamp left over. On the paper instruction under item Q. No idea where it could go and it isnt mentioned in this video. Wtf?

[@b-have9754]

I installed it on my 2014 Chevy Silverado and my engine light came up! Are these not compatible with gm???

[@RobErt-ko9vk]

You installed the mafs upside down just flip it and you will be good

[@jasonnellis3566]

which is best plastic or metal tubing for 2014 1500 chevy 5.3 Z71 LT 4x4

[@dg-man211]

How is the filter with places that come into alot of dust?? Like everyday driving on roads with alot of dust.

[@nene90047R1]

I just order my 77 series for my 6.2 Denali..

[@denvernuggets007]

Did you got your order??? I got mine put in today. Loves it...

[@TheTracker12]

Can this k&n filter take on our cold weather up north (-45) ??

[@kobe1156]

Can you use the stock breather hoses

[@brendanmeier8294]

Also helps you get more hot air in the motor

[@jasondayberry9906]

Why don't you reuse the factory quick connects or thr kit should of came with them like other kits

[@farmboysteve3295]

Does this void any warranty?

[@martro9266]

does this filter requires any type of regular cleaning?

[@AmericanTrucksChevyGMC]

K&N filters generally don't need to be cleaned too often! I'd recommend taking a look at it every 20,000 miles or so. If things are looking really dirty and clogged with dust it may warrant needing cleaned, but if it looks fine you can let it go! -Zach

[@tylerperlman2893]

Do you have to unplug the battery first ????

[@christianbishop4548]

nope!

[@repairvehicle]

Extra horse power at extra cost? Not worth it.

[@AmericanTrucksChevyGMC]

Typically you have to pay for something to get extra horsepower out of an engine. I wish we could get it for free. 😂 -Zach

[@denvernuggets007]

@@AmericanTrucksChevyGMC Nothing is free unless you order it straight from the dealer when you purchased the truck or Suv. lol

[@Doniehg]

again another box that will pull warm engine bay air

[@TOMASDIAZ-s2x]

Budget friendly 😂😂399.99😅

[@MicahGolmon-hf8ds]

Man mine was 550😭

[@Canada55Eh]

K & N = 🤡 --- S & B = 💵