2014 Honda CRV Timing Chain Nightmare... Crank... No Start...

[@jimjones1678]

He had a medical issue alright. He shit his pants when he couldn't get it started. He was like I best have a heart attack and get the fuck out this. I'm in over my head. 😂😂

[@RobertDotterer]

Well I wasn't there so I don't want to say anything too negative. I'm just glad I got it running.

[@richard112360]

I learned a lesson on a timing belt replacement/water-pump service which un-be known to me was done by a very inexperienced mechanic. He did not have a clue and almost destroyed my engine. I had to have a second timing belt and water pump service done at the Honda stealership. Never again, I now only use independent ASE Master techs to repair my late model Accord...

[@daveunbranded]

This is a good lesson for you. Never take over someone's work. You will always get fudged

[@RobertDotterer]

I bill by the hour and I told them I didn't know what was touched and there may be other issues.

[@eddiereichel9354]

I had installed a NTK/NGK Spool valve (back of head) on a customer's car. Coul dnever get it to seal up leaked oil through 3 gaskets. Got OEM and the O ring groove was 9 thousandths deeper on OEM

[@RobertDotterer]

I see that a lot on a lot of parts. Dealer parts are usually made way better.

[@ianmoments]

Good video man you got good camera skills too

[@RobertDotterer]

Thank you!

[@DependableAutoTruck]

i did a 4.7 dodge one time and left one of the cam sprocket bolts loose had to go back in was able to get the pin out and a new one put back in

[@RobertDotterer]

Glad you were able to catch it in time.

[@DJ-tn7vj]

This went bad real quick. Probably had a friend who does it much cheaper than the professional shop.

[@RobertDotterer]

It did go bad really quick.

[@markclough9000]

Take all four spark out push the accelerator to the floor and do a compression check before taking cover off

[@eddiereichel9354]

Some cars the old white out marks will work on and some it will not.

[@RobertDotterer]

That is true but they created more issues then they fixed when they attempted this.

[@kseries20-24only]

Daaaaaaang, just when you thought putting the cam back on was dummy proof!??

[@RobertDotterer]

Yea, I've never seen this before.

[@nickayivor8432]

Thank you very much for sharing your knowledge with us Take care and have a great evening with all your family around you 👍 My Mentor Robert Dotterer QUICK-WITTED ROBERT DOTTERER From Nick Ayivor from London England UK 🇬🇧 ⏰️ 19:14pm Good Evening from England UK 🇬🇧

[@RobertDotterer]

Thank you too

[@andrewrussell3679]

You never had to buy a new camshaft all you was to do is lock the actuator properly on the old camshaft

[@RobertDotterer]

I appreciate the feedback, but how would I be able to time it correctly with the alignment pin pressed into the camshaft?

[@daveunbranded]

It took 5 months to edit? LOL at Christmas music

[@RobertDotterer]

Actually I think it took 1.5months to get a new head.

[@michaelpeterson-r7b]

Valves and piston are wet. Your missing spark

[@markclough9000]

😢 bent valve take the cylinder head off

[@williegray2108]

👍🏾