2015+ Ford F-150 / 2017+ Ford Raptor Radiator Installation Guide by Mishimoto

Mishimoto 2015+ Ford F-150 / 2017+ Ford Raptor Performance Aluminum Radiator
www.mishimoto....
Engineering: www.mishimoto.c...
Facebook: www.mishimoto.c...
Twitter: www.mishimoto.c...
Instagram: www.mishimoto.c...
•Direct fit for the 2015+ Ford F-150 and 2017+ Ford Raptor
•45% Increase in coolant capacity over stock heavy-duty radiator
•55% Increase in surface area over stock heavy-duty radiator
•63% Increase in core volume over stock heavy-duty radiator
•Includes new quick-disconnect O-ring for a leak-free installation
•Full aluminum construction with durable, TIG-welded end tanks
•Includes Magnetic Drain Plug to capture any metallic debris/fragments in your cooling system
•Mishimoto Lifetime Warranty
Disclaimer
• Please dispose of any liquids properly.
• Allow vehicle to cool completely prior to attempting installation.
• Mishimoto Performance (MP) is not responsible for any vehicle
damage or personal injury due to installation errors, misuse,
or removal of MP products.
• MP always suggests that a trained professional install all
MP products.
• Do not run the engine or drive the vehicle while overheating.
Serious damage may occur.
• Raise vehicle only on jack stands or on a vehicle lift.

[@smurfadelicsmurfy2056]

I was just quoted 1800 to do this I have a coolant leak side of radiator 280k miles 2015 f150 3.5L… thank ya for this video very strong possibility I’m doin it myself… I’m thinking maybe change the hoses to new ones if I’m in there with as many miles as I got

[@yiy0k]

Thanks, it help a lot, good instructions, Blessings 🙌🏻❤️

[@yuzeyang8847]

Will it fit 2015-2017 expedition? Thanks!

[@mishimoto]

Looking over the OEM part numbers for the expedition it looks like this was not a shared part until after 2018. So this would not fit 2015=2017 models

[@Sptsmn700]

Will this work with a Whipple supercharger on the v8’s?

[@mishimoto]

This replaces the OEM unit and should not interfere with your supercharger as long as it doesn't come into contact with the OEM radiator.

[@VSCuddlez]

Welp didn’t watch the vid till now could have saved 2 hrs on the job I didn’t remove the grille 😅

[@Cendus]

Whats the ID size on the hose you used to drain coolant?

[@mishimoto]

This should be a 1/2" hose

[@jkx6535]

i have a 2019 3.5 platinum does it fit

[@mishimoto]

As long as this is the 3.5 Ecoboost this will fit your truck.