In this video I walk through the procedure to set the electronic parking brake into maintenance mode. you MUST do this before servicing the rear brakes! #ford #fusion #electronicparkingbrake
Пікірлер: 58
@Darkness41756 ай бұрын
This is definitely a great video. There's no extra stuff. It's straight to the point with clear visual and audio instruction. I was able to easily follow it and get the job done quickly.
@mmm4638 Жыл бұрын
So I didn't know this. This is my 3rd brake job. The 1st two did it with piston spinner never in service mode, all good no issues. This time, the limited brake function and all the lights came up but brake function was 100% ok. Came watched this, got scared, figured at the best case it could be out of time w pressure so that may trigger it, decided to put it in service mode, which is TDC basically and then after taking it out of service mode, it's a hard reset and it fixed it for me. Try it, if it's not fixed after in and out of service mode then you may have a serious issue. Thanks for this tho.
@paulcobb8507 Жыл бұрын
Make sure you tell people not to do this with the caliper off of the rotor. I ruined a perfectly good caliper by doing this with it already off. It pushed the caliper all the way out and busted the springs and ball bearings. Luckily it was only one side and not both. I appreciate the instructions other than that.
@danthebrakeman Жыл бұрын
Sorry that happened I was simply giving the procedure to put it in maintenance mode. It's always the first thing you should do before even taking the wheel off.
@anselgreene19228 ай бұрын
Same thing happened to me man
@Patrick.RyanOfficial8 ай бұрын
Same thing happened to me and all you can do is watch the piston nearly pop out, cant stop it quick enough
@gabrielrioschacon84553 ай бұрын
Appreciate this video glad i decided to look it up to be safe.
@danthebrakeman3 ай бұрын
No problem!
@dominicsue Жыл бұрын
Thanks for the quick/easy explanation.
@teelaharris4928 Жыл бұрын
Thank you 😊/ help me fix a issue that I didn’t have to pay for
@dylanthomas97612 жыл бұрын
Thanks Dan, you the man
@danthebrakeman2 жыл бұрын
👊👊
@ken122693 жыл бұрын
I just did my rear brakes on my energi titanium and didn’t do any of this. Didn’t even know this was a thing. I screwed the calipers in using that little square tool. Seems to be working fine, but I hope I didn’t screw anything up.
@trialsdungeons8737 Жыл бұрын
hi , my car is 15/16 awd ecoboost 2.0, it doesnt have a key, just a presence key, i got the error park break malfunction service now, what should i do ?
@mattwalls13403 жыл бұрын
Great video
@danthebrakeman3 жыл бұрын
Thanks!
@charleslewiswright9030 Жыл бұрын
Thank you sir!!!!!!
@blkbrdmntrvimes64382 жыл бұрын
What happens when you follow all the steps you showed and it still doesn't come up
@feliciatalk19223 жыл бұрын
What would happen if the dude who changed out the breaks never even put it in maintenance mode? How would you fix all of the notifications that came up in regards to the breaks and what not?
@danthebrakeman3 жыл бұрын
Hey Felicia, you would more than likely need to replace the electronic parking brake unit $$$$$$
@christophertaylor540 Жыл бұрын
I just seen this this video do I reset the parking brake
@DiscovercanadawithAffi Жыл бұрын
I just changed both calipers and break pad and sign just came on for the brakes and it's blinking what should I do now I didn't put it in the maintenance mode please help Thanks have 2016 ford fusion 2.5L
@ahouse780311 ай бұрын
So this is only for the rear brake maintenance not the front?
@danthebrakeman11 ай бұрын
There's no maintenance mode required for the front. This is just for the electronic parking brake, which is only in the rear
@johnnasanders82002 жыл бұрын
Hi. Thank you for the video. Quick question. We have the brake piston tool (the little square like tool that's used with a 3/8" ratchet). Since we have that do we still need to put our Fusion in maintenance mode or are we okay to proceed as normal? Thank you.
@danthebrakeman2 жыл бұрын
Yes you actually do not need to piston tool these calipers do not spin in once you put it into maintenance mode they push in like normal calipers.
@johnnasanders82002 жыл бұрын
@@danthebrakeman Sorry to ask another question. My husband just changed the brakes using the maintenance mode and a c-clamp. However, it is still scrubbing as bad or worse than before we changed the pads. Do you have any suggestions?
@danthebrakeman2 жыл бұрын
@@johnnasanders8200 it's hard to say for sure I would check and make sure it's not the front making the noise then make sure everything is seated properly it could just need driven especially if the rotors were not replaced
@z3alious Жыл бұрын
Um I can not get my piston to retract . It seems to move in then out but never in very far.. using manual tool didn’t know bout mode … it’s so strange like which direction do you turn the manual tool to get it in ?? I’m completely stuck im going to try to do the maintenance thing with the break pads already off .. Prey this works . I have no clue why it will not manually retract Im stuck without a car now eek
@danthebrakeman Жыл бұрын
The piston will not go in unless the electronic parking brake is in maintenance mode
@kremit42088 ай бұрын
Not sure if you will reply as this video is quite old. But what can I do if my car will not go into maintenance mode? 2016 ford fusion
@danthebrakeman8 ай бұрын
I have a few videos on my page of how to reset it manually. Look for the honda Civic videos on my channel the calipers are a bit different, but the process is exactly the same.
@mightymadness3776 Жыл бұрын
When you put it in maintenance mode, do you leave the key in and car on or do you take it out and the car turns off but maintenance mode is still on?
@danthebrakeman Жыл бұрын
Just shut the car off like normal it won't come out of maintenance mode until you complete the process in the video
@antwoinekornegay8633 Жыл бұрын
What do I do if we changed it and didn’t put it in maintenance mode. Now my e breaks alarm is going off
@danthebrakeman Жыл бұрын
You can try the procedure to reset it but you may have damaged the actuator
@earjordan99842 ай бұрын
@danthebrakeman 11 months later...if I damaged the actuator? Stupid fucking question, ɓut how do I fix that? 💀🤦🏾♂️ Had some body work done. And the guy told me he's familiar with it because he's worked at a dealership before. Told me it was the brake actuator relay. Dealership systems have been hacked & can't look at or schedule shit, and I'm trying to fix this. My parking brake acts as if it's on. Brake light is on dash. Makes the car work harder...like hum loud like a regular vs. a silent hybrid. 🤣
@totallytame46212 жыл бұрын
So how do u fix it when it wasent put in matinance mode and the brakes were replaced?
@danthebrakeman2 жыл бұрын
That depends if it could just need reset or the whole electronic parking brake unit could need reset.
@cryptorob9616 Жыл бұрын
We are having the same problem today. We did not realize we had to put it in maintenance mode. Now the car won't even turn on. Totally Tame, how did you end up resolving your issue?
@JaiFillz2 жыл бұрын
Anyone tried it & know how to make it stop making the noise ?
@sealoftheliving49982 жыл бұрын
Idiot Ford why they replace the traditional manual hand brake compare to this crazy idea epb which is another investment to car owner. Manual hand brake long last and no problem even 200 yrs or more. Ford bring back the manual hand brake so that owner will not invest for this shit epb
@danthebrakeman2 жыл бұрын
Share that.
@chuckl35063 жыл бұрын
My 2016 has the push start button and Im getting ready to do my rear brakes, just wondering if is it the same concept with push button start as it is with the key?
@danthebrakeman3 жыл бұрын
It should be the same process
@chuckl35063 жыл бұрын
@@danthebrakeman I had no problem putting it into brake service mode but when I went to take it out of service mode after replacing the rear brakes, the light indicator went from service mode to “Park break limited function, Service required”. I put it back into service mode and had to repeat the process a few times but it finally did exit service mode with no issues. Thank you for your help, great video!
@danthebrakeman3 жыл бұрын
@@chuckl3506 glad you got it! I see them all of the time with permanent brake lights on because someone didn't know the EPB had a to be put into special mode.
@TyRC123 жыл бұрын
How do I get it out of maintenance mode 2016 Push start?
@danthebrakeman3 жыл бұрын
Hey tyrc , just saw this comment hoping you got it. Should be the same as disengage procedure just the opposite with the parking brake button.
@elviraceasar59892 жыл бұрын
I just looked this up because my light came on from saying that! I was scared is that what it means that you need new brakes? Lol
@danthebrakeman2 жыл бұрын
It's hard to say it could've been inadvertently put into maintenance mode. Does it say service or maintenance mode?
@elviraceasar59892 жыл бұрын
@@danthebrakeman it does not. It says park brake malfunction service now
@hunterm.1722 жыл бұрын
How do you do it if you have the push button start?
@danthebrakeman2 жыл бұрын
Same process no need for another video on it in fact I show the same process on my Ford edge video :-)
@hunterm.1722 жыл бұрын
@@danthebrakeman Its definitely different
@MasterPeace124 ай бұрын
Ain't work for me
@danthebrakeman2 жыл бұрын
If you're in the Cincinnati area and need brake repair check out theautollama.com