2017-2020 Tesla Model 3 AUTO Trunk Retrofit Hansshow Kit Review and Installation!

#tesla #elonmusk
👉 Model 3 Trunk Powered Retrofit: www.hautopart....
🔥Limited Time USE CODE at Checkout for huge discount: Megawatts
👉 Model 3/Y Carbon Fibers: www.hautopart....
🔥Limited Time USE CODE at Checkout for huge discount: Megawatts
💍 Ring Key, may work for refresh X and S: www.hautopart....
🔥Limited Time USE CODE at Checkout for huge discount: Megawatts
👉V3 swviel mount? www.hautopart....
🔥Limited Time USE CODE at Checkout for huge discount: Megawatts
👉Dash REAL Carbon Fiber? www.hautopart....
🔥Limited Time USE CODE at Checkout for huge discount: Megawatts
👉Frunk Powered: www.hautopart....
🔥Limited Time USE CODE at Checkout for huge discount: Megawatts
👉Frunk RGB Mutiple LED AMBIENT LIGHT: www.hautopart....
🔥Limited Time USE CODE at Checkout for huge discount: Megawatts
👉Frunk LED AMBIENT LIGHT: www.hautopart....
🔥Limited Time USE CODE at Checkout for huge discount: Megawatts
👉Heads Up Display www.hautopart....
🔥Limited Time USE CODE at Checkout for huge discount: Megawatts
YOKE OEM: www.hautopart....
🔥Limited Time USE CODE at Checkout for huge discount: Megawatts

[@WheelzTV]

Did I miss something? Where is the rest of the video? Where did you mount the computer? Why didn't you show any of the actual hooking up of wires? Why didn't you show mounting the hinge? This was a great video I was following step by step until you just jump from plugging in CanBus plug to testing. Now I've gotta find a whole other video to finish

[@Bigpopp1]

You could use soapy water to run wire through.

[@megawatts]

Water might cause corrosion

[@Arthur-rh9tf]

Gonna have to do this soon 🤔

[@sedona90ify]

Why do you have to leave all doors open? I may have missed it but did you have to pull wires around ? I got my car back after a truck retrofit and my driver side door is cracking 3 cracks when I open it

[@prostovanka]

Had Tesla change out the trunk harness under the recall and they might have taken the "motor plug" cable, trunk lift gate no longer working. Wonder if there is a way to get individual cables from Handsshow directly incase one goes missing or is damaged 🤷‍♂

[@megawatts]

I am surprise Tesla touched it even with after market parts

[@KevinCasipillai]

Is there any solution on how to get the app working with the trunk? I Can only open, But i cannot close? I have tried to reconnect the can and restart the car, without any luck.

[@roccostarzzz]

great install. did you have to take the rear bumper off to run the strut wires?

[@megawatts]

No bumper removal needed only need to if you install kick sensor for me not worth for a kick sensor

[@superfanatico]

Whwre can I get those mats?

[@kenbob1071]

Just had my recalled trunk harness replaced and discovered the next day that the removable cover on the trunk lid isn't securely attached anymore. Bet they broke a bunch of clips taking it off and didn't bother replacing them. Love the car, but Tesla service sucks.

[@kevintran6108]

trunk can be open and close but the Tesla computer complains that primary power did not see the low voltage. How do I reset and make this goes away?

[@megawatts]

You need a new 12 v battery

[@Nitro187]

Quick question - My Model 3 (2020) doesn't shut when I use the phone or the touch screen... any idea what I'm doing wrong? It closes when I press the button I installed... just doesn't seem to work with the app or touch screen. Thoughts?

[@megawatts]

Try first resetting by pushing in both scroll wheel for 10 seconds

[@megawatts]

Touch screen works to close when you step on brake simultaneously

[@Nitro187]

@@megawatts so brake then press the button? (And I was mistaken... it works in the app.... just not the touch screen.... I will try braking while pressing next)

[@alexp7362]

I have the issue that not working from the app or display

[@Nitro187]

@@alexp7362 Sounds like you may not have the ODB connected properly. Everything worked for me - including the app and touch screen. Touch screen required holding the brake first.

[@gregorycooper7340]

How did you run the wires from the struts into the trunk?

[@megawatts]

I did it the Og way through tail lights opening and added some adhesive plumbing clay pudding, was to lazy to take off bumper. 😂

[@ericaguiar5422]

I would definitely have to take this to a professional. Any LA recommendations?

[@CelebrityLyrics]

I want a professional to do mine too. Did you ever find one?

[@teslam3lrsuper528]

Awesome

[@NoTimeForThatNow]

They sent you two left gloves?😅

[@alexp7362]

When I push the brake trunk close letters getting flashy on the screen and won’t close

[@megawatts]

What?

[@vatsav4321]

Thanks for your installation video- have a quick question . After installation climate control is at fault error is showing and also i can only open the trunk via app or car display but not close the trunk.. i tried rebooting but its till the same.. is there anything wrong i might have during installation?

[@megawatts]

To close trunk from inside car you need to have foot on the brake. The app allows to open and close for me

[@vatsav4321]

@@megawatts thank you.. do you know how to fix the app part?

[@megawatts]

@@vatsav4321 unplug the canvas and turn off car power completely then re plug canvas and the turn on car

[@Drhalo69]

so I have an older one of these and my complaint is the strut is so wide it rubs against the rubber weather strip on the rear window. Others have complained theirs has been torn by this. Does the new strut hit the stripping right when it opens and just as it closes?

[@megawatts]

It does hit is upon close and opening. You just need to cut the trim off like Tesla does with their OEM for 2021-present. They have the same issue even with OEM on left side

[@Drhalo69]

@@megawatts thanks. Do you know the difference between the v7 and v4? Mine is older and curious what’s changed

[@megawatts]

@@Drhalo69 the computer and speaker build in one box and fully water poof now

[@kevintran6108]

did you remove the fender to run the cables for struts?

[@megawatts]

No you run it along the trunk rubber trim

[@davidpereiro3686]

Can you install it without the CAN bus wire?

[@megawatts]

You won’t have control from display or phone if you don’t

[@alexp7362]

Hi guys yesterday I installed Hannshow V10 trunk power lift kit connected to can bud ecc and still no control from Tesla App or from Display any suggestions?

[@thekrisho]

THANK YOU!!! USE HIS COUPLON CODE FOR 15% OFF

[@ericklee2050]

Hey Kris, did you end up ordering this power trunk kit from hansshow? I did and I think the sent me the old version with the rectangular button and control unit with the separate speaker.

[@thekrisho]

@@ericklee2050 I actually end up holding off after watching a few more vids and reading more reviews, the qa/qc seems to a bit of a risk. I didnt want to take the chance of the latch burning up in smoke or the sensors messing up and auto opening randomly or even not being able to open or close at all after a few months of install. Hope that it works well for you!