2018-2019 Mustang GT Header, CAI Intake, PBD Tune and E85 Install.

[@StangMode]

Great times! Thanks Again for all ur help!

[@robertjohnson7895]

I ❤️ my 2019 GT mustang with the 6 speed, but I want more power around 70-80 miles a hr. Maybe Nitrous? Thanks 🙏 and keep the Mustang videos a coming

[@jswan9658]

I can't imagine doing this install with out a lift. Great job Guy's , well done !!

[@Zander13Productions]

Thanks 😁

[@williamhorvat8224]

@@Zander13Productions , Great videos you put out. Love the step by step twin turbo install on DV's GT350R. 👍 With all your Mustang knowledge and experience.... why don't you open a shop building Mustangs ?

[@Zander13Productions]

William Horvat thanks. We have actually thought about doing that

[@Godswarrior83]

On my 2021, Mach 1 is pain, it's taking a long time to put motor bracket and motor mount back on. On jack stands. Nice video!

[@robertpoer3778]

I have a 2016 Mustang gt and installed Texas speed headers in 6 hours .. my 6 speed was way easier than her 10 spd auto .. she has a 2020 mustang gt with Stainless power headers..the problem was I had to dent the header on the driver side to clear the steering shaft on mine with Texas speed... so headers didnt fit perfect. the stainless power had better fitment on her car .and did hers in 8 hours ..on jack stands for both.

[@SpoolingUpPerformance]

Awesome man !!! Sweet that he flew you up

[@Zander13Productions]

Oh yes. He is awesome

[@waynewilliams1726]

That was a tough fight, but you won and the car sounded great. Hope you get yours back soon so I can see your plans for it.

[@Zander13Productions]

I cant wait. its like waiting on Christmas to get here lol

[@waynewilliams1726]

I know this is hard on you, watching everyone else moving forward. While your stuck in neutral.

[@racingfox8169]

That’s it keep busy while your own car is in the shop, I glad it was only superficial and you’ll be back in action in no time! 😎🏁

[@Zander13Productions]

Yes, can’t wait

[@aussiesupersnake6642]

made 536 rwhp from 462 before= 74rwhp, in aus we work on 10 rwhp =1/10th so should pick up almost 7 1/2 tenths on 1/4 mile

[@Zander13Productions]

Huge difference

[@saleen367]

Great jobs guys! I know from past experience that longtubes can be a nightmare to install. Looks fairly uneventful. I'm guessing this should put SM into the 11.10's with the right conditions.

[@AlexandruCandet]

Incorrect said these guys are there working because stangmode was just filming...😁

[@Zander13Productions]

lol

[@tevetanders9729]

TEAM WORK WITH A GOAL.👍

[@cobradwight1]

I’ve started following all of you. You all seem like some pretty cools guys. Only prob is I wish you were out here where I’m from in SoCal.

[@carlospalacios6895]

What’s the part number for the aftermarket head-studs/bolts?

[@javaloots696]

sweet. nothing like a nice na with 490whp firm. close to around 585 crank?

[@superjavi9820]

those sound great i wonder if they match up to the mbrp x pipe with stock active exhaust

[@kennethburton3056]

You know I want this same setup bro. I need a lift. (Maybe with the exception of the headers type) love the video bro.

[@Zander13Productions]

Thanks, we can install them here

[@crewdawg16]

Since it wasn't mentioned in the video: Make sure you disconnect your negative battery cable before you mess with the starter.

[@Zander13Productions]

Yes definitely

[@ssfamous2.0]

It was mentioned

[@Evoevo951]

What Xpipe did he use on this? Was this mounted to the Stock Active exhaust? Thanks!

[@rickygonzales8701]

I love black mamba

[@convex7456]

Stayed till end. And damn she sound gooood

[@Zander13Productions]

Im going to do the same setup

[@Zander13Productions]

Thanks for watching the whole thing ❤

[@derecksoutherforeal]

Sweet sweet sound!

[@Romacitta]

Nice tutorial, Zander. Thanks. The Black Mamba sounds like it has a major bad attitude now! BTW, if I took the cats off my car here in California, I'd probably be surrounded by a L.A. SWAT team within the hour. 😄 StangMode is fortunate he doesn't have to have his car smog checked for several more years.

[@Zander13Productions]

yes for sure, I know in TN we don't have state emissions testing at all.

[@derecksoutherforeal]

I live in North Georgia virtually no emissions issues ever.

[@zolnai99]

2018 mustang gt with flowaster outlaw cat back what would be the best long tube headers and off road pipes should I get for it

[@gustavobonilla971]

Hey man, I love watching your video because your content is so useful. But I just bought the Corsa Longtube headers for my 2019 Mustang GT and I’m taking it to a local shop near me and they are going to charge me 600-700$ to install them. I just want to get your opinion and see if that’s a good price for an install or, should I try to install myself on some jacks stands?

[@Zander13Productions]

6-700 is about the going rate. I, Myself am cheap so I always do things myself. It is about a 7-12 hour job though on jack stands.

[@caryfoster87]

Did you have any clearance problems with your passage side header and the a/c line? Were they touching?

[@Zander13Productions]

Make sure the engine did not slide over towards passenger side on install. Very common. Have to pry it back the other way

[@caryfoster87]

Ok thanks Zander!

[@bigdaddytrucker8312]

No disrespect guys but Mr Modes best time without seats and cool air temp was 11.33 i believe long tubes are not taking u in 10's maybe 11.09 im thinking , ok dont hate me now LoL

[@Zander13Productions]

you may be right. lets cross our fingers

[@Zander13Productions]

What do you all think it will run? 10 Second 1/4th mile?

[@Zander13Productions]

I know what it is but cant release that info yet. stangmode asked be to keep it quiet until he drops his next video. I can tell you it is way way more than expected.

[@ancientruinsofficial]

I think its going g to run 10.9😎

[@CornfedKillerDude1]

It won't go 10's without serious suspension mods. Steeda's is in the 10.9 range and its completely tweeked. Mine is within a tenth of StangMode's time, but I'm full interior, I've never taken my seats out like he has. @Zander13

[@37oH55V]

Correct tuning on e85 says high 10s Pulling out timing up high brings that HP curve out beautifully

[@AlexandruCandet]

The power it made it's 536 WHP so that's 635 HP and theoretically it should run 10's because the Porsche 911 Turbo S with 570 HP runs 10's but we ave to take in consideration that it has all wheel drive which helps it not spin and pull fenomenally like an electric car...

[@williamklaproth85]

Why does nobody coat them before they put them on?

[@kxwid]

Can they fit on to the factory cats?

[@victorxavier9977]

PITA great job guys!

[@Zander13Productions]

Thanks, lots of work

[@Joshua3131cc]

Any e.t.a. on when your car will be fixed? I know paint and body seems like it takes forever.

[@Zander13Productions]

Looking like 2 weeks

[@Gupone]

isn't it illegal to take off the Cats?

[@Zander13Productions]

It can be depending on state

[@frontbum666]

2018GT5.0 10R80 This is actually a global law and not restricted to the USA, any car sold with a catalytic converter needs to retain a cat though it doesn't matter (to an extent) what size you run. So with a car like this you could run 5" or bigger cats and see the same power increase... And still be legal. These guys are just doing it on the cheap, and I find that disappointing considering the amount of sheep that'll follow this shit.

[@milleniallgt9715]

Good thing the whipple supercharger is legal in Cali my only option for more power and still be legal.

[@robgp69]

@@frontbum666 who cares, adding a cat is more expensive. Plus he's on e85 so he's not polluting the air to much. 😂

[@ltc9468]

Did you guys change out fuel injectors or spark plugs for e85?

[@oscarcuevas830]

You don’t need too unless you have boost

[@videomaniac108]

You guys obviously forgot to give the Three Stooges Header install service a call. If you had it would have been Miller Time about 3 hours earlier.

[@Zander13Productions]

Lol there was beer involved

[@tlcgtp]

So I have the manual, what exactly is different with the starter?

[@Adrian5oh]

did you guys have to cut and weld anything? on the website it says that's needed for 2017+ cars

[@Zander13Productions]

No. Perfect fit

[@JoseRamirez-xe2zg]

Would these work with the xpipe That’s on the borla ataks

[@CornfedKillerDude1]

Long tubes on an '18 is a total pain. anyone reading this, replace the crappy OEM rubber engine mounts while you do it, especially if you have a lift, mine has the BMR's, I highly recommend them.

[@Zander13Productions]

def a great idea. when I do mine I am going to probably do it

[@bigice9368]

I’m currently in the process of install these same headers ..... what the trick of using the factory studs it’s no room put on a socket or a wrench

[@Zander13Productions]

I didn’t use any of the factory studs. Some of the top ones might fit though.

[@bigice9368]

Okay so you used like some arp bolts ?

[@Zander13Productions]

Matt Cousins yes

[@earniesimmons9835]

What size headers?

[@lockdown03cobra]

One question how did you guys deal with the 02sensors? Did you guy use the extensions ? Or not ?

[@Zander13Productions]

Yes. He had the correct sensor extension that they sent him

[@rickyrick8417]

You can reroute the passenger's side o2 sensor wiring to make it reach, but on the driver's side you need to either use an extension or reroute and use a oem passenger side o2 sensor (comes with a longer lead wire).

[@mariofangs]

That's a big boy, change name from black mamba to big black bear

[@douglasbaker5949]

You say you don’t us the oem exhaust studs so what would you recommend?

[@Zander13Productions]

Short header bolts

[@abmotorsports4284]

@@Zander13Productions where can I purchase these short header bolts

[@37oH55V]

Are you going to be at the call out Zander?

[@Zander13Productions]

I am working on getting there, yes

[@37oH55V]

@@Zander13Productions see you there

[@ArticSun]

What did you guys do about the rear O2 sensor wires

[@Zander13Productions]

Unplugged. They get turned off in the tune

[@ArticSun]

@@Zander13Productions thanks

[@alfre1277]

Do you need upgraded injectors for e85?

[@Zander13Productions]

With 18-19, no

[@davidmorando7188]

Part number?

[@fastfordstang13]

👍

[@JustKona]

Passenger side is always harder on any v8

[@Zander13Productions]

yes, its no joke. the drivers side is such a breeze though.

[@silverbiggredd_8560]

I think he will run 10.95

[@Zander13Productions]

Thats fast

[@silverbiggredd_8560]

Zander13 everything must b just right, cool weather and a little breeze at his back lol

[@Zander13Productions]

yes I agree

[@Zander13Productions]

lol the stars have to align and if they do, he should be close

[@charliestavro2843]

That looks like fun....not lol. Stangmode's power stance while filming made me lol

[@woodboat3G]

best way is to buy a hellcat and put drag radials on it. Boom in the 10's

[@KlipschHead281]

Or, he could continue with the car that cost him a crap ton less and beat that Hellcat anyway. ;)

[@woodboat3G]

@@KlipschHead281 unlikely

[@woodboat3G]

@@KlipschHead281 and of course it was meant as a bit of a joke because i know he had a fast hellcat.

[@a.wheeler7731]

He should be in the 9s after the SC most likely

[@Zander13Productions]

yes, exactly my thoughts

[@adamsplanet]

3am!😶😴

[@bigdaddytrucker8312]

But wtf im a truck driver what do i know ? LoL

[@convex7456]

#gotlift