I installed Ebay headers on my 2016 Mustang GT!

Installing long tube headers on my Mustang.

[@jameswray2687]

Installed long tubes on my 2011 by myself, real pain. Drivers side went well, other side took me hours and hours. Installed in my garage no lift. Looking forward to a meet up at the strip.

[@NMBOOSTEDGUY]

Good job! It is a pain. There is no way I would have done it myself without a lift. Props to you.

[@latinolife1550]

How long did it take you???

[@unfiltereddad5126]

I installed XForce long tube 1 5/8 and the passengers side was a pain, but I did mine on the ground with a cherry picker to raise the engine and have no clearance issues.

[@godlybrotherm3059]

I wish I would’ve saw this video last week. I purchased the stainless power from American muscle. But they way playing games on shipping so I canceled going with these.

[@thomasrouh2258]

Lotta work.....If your coyote is naturally aspirated it doesn't need headers.....Ford did a pretty good job with OEM

[@Shakeem]

love the content ! want to see more

[@NMBOOSTEDGUY]

Thanks man! More to come for sure.

[@fazeh1best411]

Did you use o2 extensions? F150 o2s? Or was there enough slack to connect the front ones?

[@woptobrson417]

quick question mines ranging from 130 so when you bought the headers for quantity what did you put because if i put two i feel like ima get 4 pipes since 1 quantity already shows the full set up with gaskets bolts and etc for the price

[@robe6849]

do you have the link for the headers and also for the pipes?

[@FLAASH_5.0]

Ahhh the Fitment and install would’ve been so much better with name brand headers

[@gaming_misfits9304]

How did u get the top bolts back in on the passenger side...?

[@ashtonleverett8381]

Can you drop a link for the connection pipe please

[@Barrios505]

Race in paradise my friend! Love you bro

[@drewdogman]

did he pass away?

[@MightyRedI]

Unfortunately, yes

[@B0st0nftw]

can i ask....what are those welds on the "factory" piping?? oh my god

[@NMBOOSTEDGUY]

Ha ha. I cut the pipes off to get the melted cats out and quickly welded them back on until the headers showed up. They weren't meant to be pretty just temporary. Watch my other video, I melted my cats! Thanks for the comment!

[@jnefoster]

Rest in paradise.

[@Chilo.Coyote]

Are these the 2m headers?

[@s550gt5]

Where can I get those headers ?

[@ezequielperez5714]

What mid pipe did you use?

[@kadencastle9357]

How are they today ?

[@papajoewil10]

How are they holding up?

[@JorgePerez-je1bi]

excuse me friend where did you get the bbk adapters

[@jay5.03]

Can you fit a 3in x or h pipe

[@Durtyrags]

do you have the corsa sport cat back?

[@5740902]

What’s the name of the headers

[@Eugenio2583]

Hello I have a question do you have the link for the headers it will be great help thanks

[@drpepper593]

Did you get the mid pipes separately or did it come with the headers?

[@ricardoparga5614]

Separate bro he said it

[@silververt5.058]

Did you have to bend the driver side header?

[@NMBOOSTEDGUY]

Yes I had to heat up one of the tubes and pry against it because it was hitting the transmission.

[@solidusnash7176]

Damn I’m torn between shorty and long tubes. Long tubes seem like such a pain in the butt.

[@98snakehorse]

The factory headers are pretty much shorties on these cars

[@dante69d]

Also with this set up do I need extended o2 sensors?

[@NMBOOSTEDGUY]

I just needed the extensions for the front o2 sensors. The rear ones reached just fine.

[@dante69d]

@@NMBOOSTEDGUY Thanks

[@jumpman803706]

NMBOOSTEDGUY how are the headers holding up ? Thinking of purchasing some .....

[@AKAKILLINGKING]

Lol I’m boosted too and I’m stock ehuast making 700whp with my 17 mustang gt and I want to super cheap out on headers LOL how are they with boosted Application

[@NMBOOSTEDGUY]

Surprisingly no issues at all.

[@dante69d]

Was nice meeting you yesterday and you convinced me on the Ebay headers. Who did the install I'm guessing you did? I'm look ing to pay someone to do my install.

[@NMBOOSTEDGUY]

Nice meeting you to. Yes I did them myself. I posted a short video.

[@juantrevino2807]

What gaskets did you use????

[@NMBOOSTEDGUY]

I just used the originals. They are metal and were still in good shape. I had bought some from Napa but they seemed to be cheaply made.

[@ericstrohl6988]

Link?

[@sinnerarewinners8529]

Did u use a different oh2 sensor or factory fits

[@NMBOOSTEDGUY]

I only had to get extensions for the rear ones. Yes OEM o2 sensors.

[@sinnerarewinners8529]

@@NMBOOSTEDGUY thank bro

[@axelsilvajr]

How much power you gain from these?

[@NMBOOSTEDGUY]

I believe it was around 50hp. But don't forget it is Procharged. Just removing the cats helped a lot with restriction. On a NA car you might see around 20-30hp gain with a tune. By the way thanks for subscribing! I just got the BMR irs lockout kit which I will do a video on very soon.

[@axelsilvajr]

@@NMBOOSTEDGUY thanks for the quick response, ill look into em

[@patcapuano9911]

what mid pipes are those

[@NMBOOSTEDGUY]

BBK.

[@ignacioroldan3585]

Hey man where in the 505 are you located at ? What shop is that ?

[@NMBOOSTEDGUY]

I'm In Rio Rancho. I work for a body shop in Albuquerque.

[@QuestWithMe]

Woo-hoo! I'm in Abq :) Rio Rancho is the best. Gettng my s550 with tax return.

[@AKAKILLINGKING]

Is this a 1-3/4 or 1-7/8

[@NMBOOSTEDGUY]

They are 1/78

[@deruboiii4724]

So how are the tubes holding up?

[@usernameunavailable5090]

Unfortunately my friend crashed his mustang and passed away a couple months ago.

[@derekiskindacrazy1541]

@@usernameunavailable5090 Jesus dude that's so sad you knew him ? Just started to watch his videos dude I'm hurt even watching his videos and I never knew him sorry for your loss😞

[@deruboiii4724]

@@usernameunavailable5090 just reading this now. Rest in peace.

[@gsheverything_2716]

eBay has a header for mustangs

[@NMBOOSTEDGUY]

Hell yeah brother!

[@frankybaez1737]

What’s going on with the tail lights

[@NMBOOSTEDGUY]

Lol. Ford GT tail lights! You either love them or hate them.

[@frankybaez1737]

NMBOOSTEDGUY respect it bro looks funky I’m sure it’ll grow on me 🤣

[@NMBOOSTEDGUY]

@@frankybaez1737 Looks better in person, plus I stand out from the rest of the millions of other stangs out there.

[@frankybaez1737]

NMBOOSTEDGUY that’s one way to look at it. There’s legit so many stangs 🤣

[@Coyote.five.0]

@@NMBOOSTEDGUY love the lights my man.... are those raxiom or morimoto?? i have the same lights in my 19 gt i love how people hate them, makes me love my lights more and more every time.

[@TheCdM1981]

You clearly like taking risks. Lol.

[@NMBOOSTEDGUY]

Someones got to do it. Lol

[@MrDavidelliottjr]

I didn't know ebay built headers 🤣🤣

[@NMBOOSTEDGUY]

No, but they sell them. Lol

[@Reecesavage-Alwayswin]

Actually they have 2 companies here in southern California one is name speeddaddy and they sell them on ebay but local exhaust shops sell them

[@rodneylarrydog5214]

Rip Jason

[@mejustme1654]

How did he pass

[@rodneylarrydog5214]

@@mejustme1654 A drunk driver hit him in that car leaving the casino.

[@shmokealot778]

of course a new mexican would put those tailights on a beautiful mustang

[@NMBOOSTEDGUY]

Those are Ford GT lights bro. Got to do something to stand out of the millions of other Mustangs out there.

[@coinsagE46m3]

1:26 "Chinese" you mean

[@airflow_concepts]

Nice car. I really like those tail lights but I have mixed feelings about them. I just subbed to your Channel. You should check out my car sometime. I have a small KZbin channel myself and live in Albuquerque.

[@NMBOOSTEDGUY]

Sweet! Nice ride. I'll check out your videos. I subbed yours as well. You should come out to DynoEdge on Saturday. Duke City Mustangs a club I'm in is having a dyno day. Should have some nice Stangs there.

[@airflow_concepts]

@@NMBOOSTEDGUY that sounds like a plan to me what time does it start.

[@NMBOOSTEDGUY]

@@airflow_concepts 9am-4pm

[@airflow_concepts]

@@NMBOOSTEDGUY sweet I will see you there.

[@NMBOOSTEDGUY]

Sounds good.

[@legofeak12]

Everything about this video makes me want to do cat deletes

[@StevenNeidlein]

Lol the gaskets are cheap ?? So are those long tubes my guy why did you buy this trash ?? Better off going with Texas speed headers that shit on your car are going to get rusted like a champ just saying .

[@jonathanallen8236]

Not sure why anyone would pay money for those tail lights. 🤮

[@johnadams8082]

Definitely not Japanese headers lol Chinese

[@BrandonCockridge18]

Dumbest tailights ever created. Only looks good on the Ford GT