2018-2023 Mustang Steeda Rear Subframe Alignment Kit IRS Installation

Bill shows you how to install a Steeda IRS Subframe Alignment Kit on your 2018-2013 Mustang.
Fitting your 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, or 2023 Mustang, this American made, CNC-machined delrin kit will make sure your subframe is bolted to the same location every time it is lowered.
Purchase Product Here:
www.cjponypart...
Check out more Mustang Bushing parts from CJ's here:
www.cjponypart...
Check out more Steeda parts from CJ's here:
www.cjponypart...
Subscribe to CJ Pony Parts on KZbin here:
www.youtube.com...

[@northwayperformance]

I have done so many of these installs. I will definitely agree with you when you say it will go one of two ways. There's actually quite a few different tricks to get everything to line up properly with very little frustration. I say about 5 out of 10 are not aligned properly from the factory.

[@Zerogivengarage]

I always use a massive phillips head screwdriver I have no other use for lol

[@northwayperformance]

Most of the time that's what I do as well. Considering I do it on the ground I have found that you can put a floor jack under the subframe with all four bolts loosened and you can move it around with the jack. Seems to save a lot of time.

[@steveamestoy]

Do these have to go in a certain way? I noticed one end of these have a slight step inside.

[@williadawilliams]

Can you put these on before you lower it with springs?

[@williadawilliams]

Ok, thanks.

[@AtticAZ]

Is there still a slight bit of wiggle room? I have this kit and my rear camber is perfect. However, my driver side rear tire pokes about an 1/8 more than the passenger side.

[@stevehall6539]

What's up with the bootie shaken vibe , car looks great Bill

[@Zerogivengarage]

Mixing it up a little bit.

[@Ecosse57]

i suggest avoiding gang signs while working on your mustang though.

[@chuckshumard7262]

Does the car really need to be on a lift or jack stands or can the wheels stay on the ground so you won’t have an alignment issue? I have a 2015 GT Convertible.

[@sergebasque8460]

Great info thanks.

[@jesterm1460]

Can I use these with the bmr lock out kit ?

[@kevinsdb1]

Hey Bill has Ford fixed the S550 horrible wheel hop issue in the 2018 Mustang or will you still need to buy the Steeda Stop the Hop kit?

[@Zerogivengarage]

The new tires and better suspension lessened it but it is still there.

[@Gibbo205]

What is that electrical connector coming out of the diff housing? Don't remember seeing that on the MY15-17 models!

[@NeonDude20]

Temp sensor for the diff. 2016 and 2017 performance pack cars have it.

[@mc-xw8nz]

I have a question since I take it to the shop to install the subframe kit. And I noticed it this guy didn't put the braket back where it should go after put the sunframe alignment kit. He just tighted up with bolt and that's it. I asked him why didn't u install it and he told me since the bolt tightened up so I don't need the braket. Is that true?

[@chrisknight3681]

can you use these IRS alignment bushings and the IRS subframe brace?

[@shhhhsecrethaha]

Hey everybody. I just recently installed a set of Pedders Xtreme coilovers on my 2017 Mustang Gt. I have to take my mustang bsck to the shop so i can have the 2nd alignment. My question is.....why is my left rear tire sticking out more than the right side? Is this common. Is it not common. And is there anyway to fix this issue. Please help. Thank you.

[@BillySAw951]

nicholas cabales they didn’t align your rear subframe correctly they just screwed the bolts back in it’s really off if it’s noticeable mines off by 2mm and it bugs ima redue my subframe alignment when I get the time