2019-2021 Chevrolet Silverado Fog Light Kit - Phastek Install

[@adamloose1695]

Took my 2019 Silverado to the dealer, had them install the factory foglights,harness and new switch, it was $450 out the door for parts and labor. Saved me a lot of aggravation.

[@Trucker2001]

What state are u in? Just curious because of the price difference between states. I live in California

[@adamloose1695]

@@Trucker2001 I'm in Pennsylvania

[@Boobtube.]

@@Trucker2001 you live in California, expect to pay 3 times that.

[@miguelrodriguez1016]

Thanks for your video. I just installed GM OEM Fog lights kit with the harness and the replacement switch that includes the fog light switch on my 2020 Silverado. C10, C3 & B3 were already pinned. Not need to run the jumper from C3 to C10 inside the cabin. I unpinned the B3 and pinned the one coming from the lights harness. Called a couple of dealers to compare price to program it. First quoted me $175.00 Second dealer $115.00 + taxes. Hope this info helps. Thanks again and very happy with my GM fog lights look.

[@positvr8]

Awesome! Thanks for that, my BCM pin 10 is also occupied

[@iamtheonlywilly]

this installation is if you want it done as if it came from the factory. Those fuse box connections make me nervous though. Thinking about doing this to my 2019. I would definitely watch this video a bunch of times before I even ordered the parts.

[@62DieselBoy]

Finished mine yesterday, had it programmed today, everything working as it should. Pin locations on the green connector was a little annoying as I couldn't find any indicators confirming which row was B and C, was worried I had the connections backwards, but it all worked out. Thanks for a great install video!

[@bearfoot100]

Thank you for showing the small details, like the green connector pin locations. I think I can finish mine now.

[@CH-jq8kq]

What would happen if we didn't reprogram the bcm?

Just add the diode dynamics kit. Better lights. Also the gen5diy harness, no reprogramming from the dealer.

[@kenw3129]

OK First things first. I defiantly used the video for the the installation of my fog lights.I had a few issues with the video. Finding the slot for the BCM hook up was not there, I suggest going to Chevy site and looking up the electrical schematic . I had no place to fish the wire through the firewall where the video showed I ended up drilling a small hole to get to the engine. Hooking up the wires to the fuse box was frustrating, I used the schematic from the instruction sheet and ended up fishing the 2 wires in the existing harness"Not easy" the video makes it seem like there is a spot for it but there is none. The guys hands hide this in the video So I'm not sure how he got it in. Pulling out the plug from the headlight was ridiculous. I ended up taking off the whole headlight ( There is a video on this SMH). . The harness has a tab and pretty much impossible to get off without complete access. So I used this video a downloaded schematic from Chevy another video for the headlight connection. All in all it was a frustrating experience, I am very mechanically capable and have some trade experience behind me so i'm not someone who doesn't know his way around a garage or tools. I've worked on cars most of my life not professionally. I probably wouldn't have been able to do this without all the above mentioned help. But considering the time, frustration bloody knuckles. And I still got to go to Chevy to program it ( fingers crossed). Do yourself a favor and go to Chevy to get it done.

[@jtstern4683]

So I need the correct wiring harness from the headlights to the fog lights the wiring from the switch to the green fuse block we’re already there is there a part number for the correct harness from headlights to fog lights?

[@davidboerstler7653]

Is there away to adjust the height of the fog lights? Mine hit the road about 8-10 feet in front of the truck.

[@miguelpadron7081]

Good video Ricardo, I have a 2021 LT Silverado and it doesn't come with fog light, the truck brings the task lighting headlamp switch, but the headlamp switch does not shows the fog light button Im not sure if I have to by a new headlight switch that brings the fog light button, in order for me to have a clean look and not a on/off sitch separately. thanks

[@tristencochran3374]

Are the bulbs in those replaceable because im trying to find amber bulbs for rhem but haveing a hard time

[@jerrypride1800]

Thank you for doing this video sir, is this the same process for the 2021 Colorado WT

[@PhastekTrucks]

The process could be similar but the wiring might be a bit different. We are not sure since we have not installed a fog light kit on the Colorado.

[@davidcollins8276]

Hi. So which 1 is actually pin 10 on the wire connector under the dash??

[@danielgarza5272]

I have hyper flash now do i have to program it so it can go away??

[@sergioarmendariz1646]

Quick question. I have a 2021 Silverado 1500 WT and currently wanting to get this done in mine but every dealership I've called to have told me that mine is not compatible. Is it possible to do this installation myselft and take it for programming afterwards?

[@Renee_Lopez]

I ordered my lights through the dealer and then the service department said they couldn’t install them because it wasn’t compatible. I went to do a return and the parts guy contacted gm directly. And they are compatible. They just haven’t updated the part number to the vin numbers but they did the install and programmed it and it works just fine. Make them do their job instead of relying on the computer

[@sergioarmendariz1646]

@Renee_Lopez I would thank you. How much did they charge you?

[@koling-koling3938]

I liked how this was done and liked the music

[@richierich225]

Do you think this harness would fit a 2020 tahoe? Ls model the harness looks like the right connectors. Just the pins for the bcm im not sure

[@danielgarza5272]

I have a wire in that slot what does that mean??

[@derrickhill8352]

I can't find the fog lights. Your link isn't working. Can you please share the link

[@GAMINGCHVCKZZ]

Is it the same installation for 22 Tahoe rst?

[@Tg-im3up]

I got the fog lights installed.. I took it to the dealership to get it programmed as well.. but the lights won’t turn on.. there is no power coming on.. has someone had the same problem? Were you able to fix it?

[@olivarezbling]

Can you please Do a 2018 sierra please mine didn’t come with them ..!!!

[@scottsymonds1950]

voids warrantee?

[@BBearBuilds]

How much did the dealership charge you to do the programming?

[@blancosilverado9795]

i assumed that the authorization code came as the code to give to the dealer and it wouldnt cost me anything, well i was wrong, im contacting GM now and they charged me $200.

[@josea3534]

@@blancosilverado9795 hey I have a question. Did you do the installation and went in for the code or is GM doing the whole installation plus I’m guessing they did the code as well?

[@YZ250Yamaha969]

@@josea3534 I installed myself and went in to have it programmed. Cost me $200 just to program. If I were to do it again I would call a few dealers. On the forums, dealers are charging differently.

[@ItzDatBoyLOS]

Can dealerships install these?

[@jasal0960]

@@ItzDatBoyLOS They can install at dealers for about $480 dollars

[@zapp_kayak7967]

I have a 21 Silverado Crew Cab 1500 with a Duramax. I can't find the grommet anywhere. Would it be different for a diesel?

[@Cbizal01]

When adding the brown wire to the #10, what if there’s a wire in that spot already? Do I splice?

[@o.b.scartel]

Same question here im lost

[@Cbizal01]

So if the spot is filled (#10), no need to run the jumper wire to the engine bay. Also, if the spot is filled in B3, you will need to either splice or try to remove the pin and run the one for the fog lights.

[@Cbizal01]

This is for no task light www.phastekperformance.com/v/inst/Fog_Light_Instructions.pdf

[@berniehayden2768]

Instructions no longer appear to be available from this link. Finally found it on the Product Page after scrolling down in the Description; just below the pictures of the switches with/with out task lighting: Installation Instructions (opens in new tab): Click HERE www.phastekperformance.com/content/inst/Fog_Light_Instructions.pdf

[@suleiman001]

If the head light and the grill swapped with LEDs does it need to be programmed to work ?

[@Tha600]

Where can i jet one of tho?

[@braianglez05]

Did you have any info for the 2022 Silverado WT?

[@tpl8865]

Hi sir, I am bought fog lights from Phastek I am install already but how you program. Thank You

[@vsntyn6855]

Hello sir.. just want to know what size is the Wheels?? The rim and tyre??

[@natecarnes7731]

How much was everything?

[@infamousbarz1271]

I wanna know too

[@jorgejasventa4658]

Tengo un cable carmelita con una raya blanca desconectado donde conecte el cable negro del fondo light donde vas

[@hm6579]

How much did the dealer charge to reprogram

[@H9Torrez]

Will this fit a 2020 custom trail boss

[@PhastekTrucks]

If you Trail Boss does not have the factory fog lights, then YES this kit will fit you model.

[@mariovaldezmonzon6637]

Unable to remove the damn headlight connection 😒. Will try to loosen right side bumper and headlight for better access.

[@gohangan]

So I did the installation and will be taking it somewhere to get it programmed. The only “issue” I ran to was wires already inplace on C3 and B3. Brown BCM #10 already had a brown/white wire as well. I skipped C3 and unpinned the existing B3. Put everything together and now when I press the fog light button, my running/parking lights turn on and off with it. I noticed this happens when Auto light control is off. Any ideas why? I’m hoping when it gets programmed right it’ll stop. I was just pressing the fog light button and caught a glimpse of my taillights and parking lights turning on and off. So now I’m wondering if it would’ve done that before messing with the fuse block? I’m just wondering if it happened to anyone as well.

[@gohangan]

My dealership didn’t charge me anything for trying to program it. They couldn’t program it and said it could’ve been the wiring install. I found a forum that also talked about the dealership not being able to program theirs. The common factor was the existing wiring in BCM 10. Those who didn’t have it, had no issue getting it programmed. Those who have it seemed to run into this issue. It didn’t bother me, I just ended up running a wire through the firewall into my upfitter switch. So, now I can just toggle it on and off with/without the lights on. If you have an existing wire, you might want to remove it and just install the one in the kit if you want a factory setup. This is just my opinion from doing some research into them failing to program it.

[@gohangan]

After I replaced everything in the fuse box, the fog light button still toggles the parking lights. So, it’s not really a “side effect” of installing the fog light.

[@deadone100]

My bcm harness x5 brown cavity 10 is used which should mean to skip hooking up under my fuse box. My cavity c3 is empty tho in the uec tho so what do I do? want to have ot wired to go get it flashed

[@jtstern4683]

I have this same issue their is a brown wire with a white stripe already in this spot

[@mik693]

Was entire kit ordered directly from Gm ?, lights , harness and switch , how much $ for just the kit ?

[@PhastekTrucks]

Yes, this kit is a genuine kit from Chevrolet. It came with the harness, bezels, lights, and code needed to reprogram the BCM. Here are the links to purchase. 2019-2021 Silverado Chevrolet Fog Light Kit With Task Lights - bit.ly/36hN5T4 2019-2021 Silverado Chevrolet Fog Light Kit Without Task Lights - bit.ly/36hrAlw

[@markdanielczyk944]

My kit cost me $319 including sales tax.

[@stoney316]

Can u install daytime running lights on this model?

[@inanimateuser9828]

Aftermarket led strips hidden is about it vs having to get the factory led housings and new grille assembly to have factory drls...

[@russtew1]

And how much does the dealer charge to set up the ECU

[@Cbizal01]

An be $95-$105

[@ericshespratt1156]

Will this kit work on 2021 2500 WT

[@PhastekTrucks]

No this is not compatible with the 2500

[@federicograciano5867]

is it the same process for a 2020 gmc sierra?

[@PhastekTrucks]

Unfortunately, these will not work for a 2020 GMC Sierra.

[@castlegarage6969]

I wired mine into drl. Fuse no dealer needed

[@hdrolling]

any chance of making something for the 2021 Tahoe? I know fogs are not an option but the fronts are similar to the Silverado's, I know the adaptive cruise module is back there under the passenger side but have already seen some brush guard companies using a bracket to relocate that module. Some of the Silverado parts fit the Tahoe's engine bay like CAI's , was hoping something could be made to have fogs work on a tahoe.

[@neck2red]

What’s the wheel/tire and suspension setup on this truck?

[@jimszczypienski1935]

I'm installing this now and I'm unable to get the fuse box off of the base. I have the 4 screws loosened and the plastic snaps undone. It comes up but won't release from the 4 colored blocks underneath. What am I missing?

[@PhastekTrucks]

I do apologize for the late reply. Double check to ensure the studs have been removed completely, some of our installs have been a bit difficult and we have just double checked everything. Hopefully everything has worked out for you.

[@rafaelsaavedra6292]

Can you send me a diagram of the brown connector pin number 10

[@hughparker5433]

I have the same question about the brown connector #10 pin. Waiting for a response.

[@davidcollins8276]

will the install throw a check engine light?

[@positvr8]

Initially mine did, but it quickly went out and the dealership said there was no history

[@michaelanderson5249]

Would this void the Warranty

[@PhastekTrucks]

This should not void the warranty, especially if you have your local dealer install the kit. If you choose to install it yourself but have them update the BCM, they should still honor the warranty since it is a GM product.

[@michaelanderson5249]

@@PhastekTrucks thanks very helpful

[@RubenPerez-yw9hq]

Can the fog lights be turned on by themselves, or only with the headlights?

[@PhastekTrucks]

As long as the key is in the ON position the lights can be turned on or off.

[@johnnygarciajr4874]

Im sure it will but still have to ask, Will these work with the 2020 2500hd as well?

[@PhastekTrucks]

Unfortunately these will not. Although the lights will mount the same the wiring is different according to Chevrolet.

[@villagedev]

@@PhastekTrucks Do you have a link for the 2500HD light kit?

[@713jdiaz]

How much did your dealer charge to reprogam? Trying to see if it's worth it.

[@compamigue4822]

I have the same exact question 🤔 dealership it's super expensive.

[@PhastekTrucks]

Various dealers can change different amounts, it all depends on their labor rate. We are fortunate enough to know a service tech that was able to help us.

[@triboe07]

I got two quotes.. one was for $318 and the other was $200. Seems every dealership has different rates. Thanks for the great video!!

[@jerrypride1800]

@@triboe07 That was essentially the cost of them doing the install, in this case might as well let them do it and rest easy

[@triboe07]

@@jerrypride1800 that was just to program not to install. I would assume that would be a lot more

[@germangallegos3838]

Where did you get the switch

[@PhastekTrucks]

The switch was part of the kit we installed.

[@Chuyito31108]

How do you program the lights Can it be done whit any computer?

[@PhastekTrucks]

Your local Chevrolet dealer will have to do the programming. They will need the code that comes with the kit and from there they can load the information needed to your factory body control module.

[@chuckryan7264]

@@PhastekTrucks I can’t put the wire in the #10 because there is a wire there please help

[@bravotrailboss8369]

What is the offset on those tires? Size wheel and tires?

[@PhastekTrucks]

The wheel and tire combo details are below. 2" front ReadyLIFT leveling kit for additional clearance. 20x12 -44offset for the wheels and 33x12.50 for the tire.

[@mikesouza4033]

Does anyone know how much the actual harness and fog light kit cost??

[@gohangan]

www.shopchevyparts.com/electronics/2022-silverado-1500-ltd-led-front-fog-light-package-models-without-task-lighting-set-lights/85149040-p-92315458.html It’s currently on sale!

[@gohangan]

I sent you the link for the kit I bought but if you look on their website, you can find it for 2021 as well. I think all of their fog lights are currently on sale.

[@ItzDatBoyLOS]

Would this fit a 21 Texas Edition 1500? If so, can a dealership install these for me if i were to bring in the whole kit?

[@seanmathias6689]

Can this kit be programmed to turn the fog lamps on automatically so that they run with the running lamps? Or are they only able to run when you use the new control button?

[@PhastekTrucks]

Unfortunately this kit can not be programmed that way. You will have to push the button each time you would like the lights to come on.

[@markgray2931]

Did you find that to be true? You would think if you a an auto headlamp selection to where when you turn on the high beams the fog lamps go off and back on with low beams. There is a $20 splicing part that’s easily installed to bypass that so the fog lights stay on with the high beams. I’m just wondering what is normal labor charge for the dealership to install??

[@alexayala5392]

There’s a kit out there where you just hook up your fog lights from your low beams/running lights so they automatically turn on when your low beams are on, with that kit im pretty sure you don’t even have to reprogram anything.

[@alexayala5392]

I found a video of this guy installing the fog lights i told you about, kzbin.info/www/bejne/bZPWqoZsmZuAb9U

[@MrPAULONEAL]

Can I get this installed at the dealership?

[@PhastekTrucks]

Yes, a dealer should be able to install this kit with out any issues.

[@ned8936]

Do you know what flat rate would be at for this job?

[@andrewbarrera9564]

I can't see the grommet to pass the wire from install the truck out to engine compartment. Do I need to remove the glove compartment to gain access to the grommet? I have a 2021 Chevrolet Silverado 1500. I have completed all of the installation of the fog lights and all outside wiring. All I'm missing is to route the single wire from inside to the outside to complete all wiring. I just don't see the grommet. Help Please.

[@PhastekTrucks]

No, the grommet is just behind the glove box, its is not necessary to remove it. It is a large grommet that will have a small section that will allow you to feed the wire through.

[@andrewbarrera9564]

@@PhastekTrucks I finally did get the wire feed thru the grommet and when I went to connect the single wire to the brown bcm connector I believe there is already a wire in location 10. Is that possible that my harness is already wired for the fog lights? I believe I see a brown and white wire in that same pin 10 location. Please advise. Thank you!

[@PhastekTrucks]

It is possible that some trucks will already have the terminal occupied. If the terminal is taken then you will not need to connect the wire from the kit.

[@patrickdaugherty7282]

So on the pin 10 can u be more clear which that is . I see numbers on the top so do I continue to count the slots till # 10. I have this all installed and my fog lights are on and won't shut off

[@patrickdaugherty7282]

Can u send a photo of what spot is 10 on this

[@chikalolopez4404]

Where are y’all located?

[@PhastekTrucks]

We're in Houston, TX but our showroom is closed right now. We are asking people to call before showing up to pick up parts.

[@mikekoslowsky]

Do you have a diagram of the brown connector under the dash? Not sure which one is #10

[@PhastekTrucks]

Our team should have the installation instructions available. If you want to email our support team they should be able to get those to you.

[@edastar941]

@@PhastekTrucks Could you please send me The installation Directions for the 2020 Silverado fog lamp install using the factory harness. I am having difficulty locating which pin is pin number 10 on the brown connector underneath the driver side area.

[@PhastekTrucks]

@@edastar941 You can call or email 1-855-742-7835/[e-mail] and someone can send you the install instructions.

[@eduardourbina4473]

Hi need diagram for PIN number 10 for Brond conector

[@eduardourbina4473]

I need a photo or the diagram of the pin number 10 please of the brown connector

[@skymediato]

Nice truck. Is it a double cab or crew cab?

[@PhastekTrucks]

Our truck is a Crew Cab.

[@jorge197]

Will this fit on a 2021 Chevy 2500 WT?

[@PhastekTrucks]

Unfortunately it will not. The programming with the body control module is different.

[@jorge197]

@@PhastekTrucks Thanks

[@joeydeleon2117]

Where can i buy this kit.?.

[@PhastekTrucks]

Here are the links for the kits available. I am not sure which kit you may need but both of them are below. 2019-2021 Silverado Chevrolet Fog Light Kit With Task Lights - www.phastekperformance.com/Chevrolet-LED-Fog-Light-Kit-With-Task-Lighting-p/gm-84962683.htm 2019-2021 Silverado Chevrolet Fog Light Kit Without Task Lights - www.phastekperformance.com/Chevrolet-LED-Fog-Light-Kit-Without-Task-Lighting-p/gm-84962680.htm

[@jerryhendrix1019]

will fit 2500 chev custom

[@PhastekTrucks]

Although these are the same shape, the wiring is different for the 2500 models. So these kits will not work in the 2500 models.

[@tonyholland9430]

What part number to I need to order .

[@PhastekTrucks]

That would depend on your model. Watch this video below and it will explain what kit will work on your model. kzbin.info/www/bejne/qoepdX5nZ6qhgM0

[@713jdiaz]

Good stuff! Been wanting to do this to my 21

[@marnik323]

Mine just came in. Getting ready to install.

[@713jdiaz]

@@marnik323 you taking yours to the dealer to reprogram or hooking up directly?

[@acerace8570]

@@marnik323 oooooooo9oooooooooo999ooooooooooooo

[@acerace8570]

@@713jdiaz ooooooooooooooooooooooooooooooo

[@acerace8570]

@@713jdiaz oooooooooooooooooooo

[@masalma]

That is a lot of plugging and not enough playing 😂

[@Tacticalpastor694]

I just did this install, and took it to the dealership to get the module reprogrammed and they told me that I had to get a new BCM?! Has anyone else experienced this?

[@Wett0110]

no that’s false

[@cody4089]

I don’t see why you can’t just wire the fog lights in to come on with the headlights and skip the dealer programming entirely.

[@WethepeopleFreedom76]

I heard the installation charge from the dealership is expensive. I see why

[@Chuyito31108]

How much ??

[@hughparker5433]

$170.00 @ the dealer

[@Chuyito31108]

@@hughparker5433 wow that’s not bad ..I called several here in Dallas 300 and up

[@markgray2931]

In Beaufort SC I was just quoted 600

[@cuda0820]

What do you do if there are already wires in the B3 and C3 ports on the fuse block?

[@cuda0820]

I had no fog lights and had to install the whole harness but the Block had the wires already in place. Do I remove them and replace with the new harness wires

[@PhastekTrucks]

In the written instructions it states that if there are wires present then the harness that comes with the kit is not needed. 10. "It is giveaway on certain trim levels. If circuit is present in cavity 10, disregard steps 11 through 14, and 23 along with the single wire jumper that will not be needed. If circuit is not present, proceed to step 11." 25. "If there is a circuit present in this cavity, remove the wire and seal the terminal. Then insert the lone terminal from the jumper harness into the UEC connector, cavity B3."

[@larryduray4349]

@@PhastekTrucks were can I get step by step instructions trying to make sense of the steps up above.

[@PhastekTrucks]

@@larryduray4349 Our product page will have the written instructions that will have a diagram of what is needed to know. www.phastekperformance.com/Chevrolet-LED-Fog-Light-Kit-With-Task-Lighting-p/gm-84962683.htm

[@mv4044]

Written instructions page appear to be down.

[@jimesaj]

I have a kit with part number 84271151...do you know if this is the right one for 2021 custom trail boss???

[@PhastekTrucks]

Unfortunately that part number is not coming up as a valid number that we have for the fog light kits.

[@carsonlewis5819]

You guys could not have been more unclear on where the wires go into the fuse box. I can't find a diagram of the fuse box with the nomenclature you used. Otherwise this a great video but sheesh this last part is slowing me down.

[@dan43213]

LOL There are easier ways to do this.

[@billymillz1367]

Dealer won't touch this job ... It's not OEM read$$$

[@Cbizal01]

No Task light step by step www.phastekperformance.com/v/inst/Fog_Light_Instructions.pdf