2019 Classic Trucks Week to Wicked: 1971 Chevrolet C10-FULL EPISODE

Watch the full episode here! Seems like only yesterday-or October of last year-since we last transformed a 1967-1972 C10 in a matter of five short days. But here we are again, this go ’round with a 1971 long-turned-shortbed Chevy that’s just itching to be updated with new suspension, drivetrain, brakes, and steering components, a fresh set of wheels and tires, and some minor interior redecorating between now and Friday.

[@danielramirez-ck6pt]

Who else is here watching these people work on the truck when you should be working on your own project lol

[@tzume7292]

I’m watching because in my country there is nowhere you can buy such model :(

[@kx5xtr165]

Oh absolutely 😂 more than one project

[@adorpodol2557]

@@tzume7292 mnnhhi

[@oscarramos4684]

Me

[@technicallymax8197]

I’m watching them to fill the void of not being able to own my dream truck cuz my sister won’t sell it 😂

[@tomdamon7208]

Craftsmanship at its finest . What a bunch of clods .

[@darrinnoble]

I'm disabled but watching Week To Wicked gives me hope of what I can do once I beat these supposed uneatable nerve disorders. Thank you for putting them on youtube.

[@bazd]

I have problems with legs spine etc. Is there no way you can get involved with a project locally at club perhaps??? Good luck from Scotland. Maybe not on the spanners/tools researching parts perhaps just get involved..

[@nelsondelgado6239]

I’m so glad to see you guys showing all the issues that go on during working on a truck. Made me feel like all my run ins with issues is not just me haha.

[@creaky2436]

I can’t stop watching these! So glad I found them

[@betherealdeal]

My dad had a 4x4 C10 back home in theCongo. That thing was a tank. I remember it being stuck in the mud pulling a big all truck loaded with tree trunks for his brick factory. The C10 went vroom vroom ...wheels spinning sliding left to right ever so slowly the truck started to move. My jaw dropped. The c10 did it

[@jamesooten3659]

My Dad had a 1970 C-10 too. Orange with a white roof & center section. There were a lot of people who were alcoholics where we lived. He was constantly pulling people out who went over the hill or into the creek. Once, a guy brought the tool truck home from work, but stopped off to have a few drinks on his way home. He went down about 8 ft into the creek. This thing had probably 1,000 pounds of tools, air compressor, wielding rig, etc. on it, but that truck pulled it out just as well as if it had been empty. Good memories.

[@rayjos0424]

If it was a 4x4, it would have been a K10. "C-10" indicates 2 wheel drive 1/2 ton.

[@papolaboy]

How I love to have a truck like that. I used to work on old cars, it's so much fun. But age (76) has caught up with me. Thank you guys. Job well done!

[@johnrobinson9711]

That's some good editing, you can hardly tell it takes 6 months to get all the right parts delivered

[@peha688]

Ohh man look at those working hours, professionalism and sweet parts! I wouldn't suprised if this build'd cost about 200k.

[@genius-no5sl]

This truck is one of the best looking I’ve ever seen . Color and all

[@puchitopuchito6531]

What a beautiful build and perfect clean truck ! Awesome guys

[@jcob4197]

They made more of a mess taking that engine out than the roadkill guys

[@justinphillips6136]

\_\_Prongs2_/_/ now that is funny.

[@mrnobody8540]

From men that claim to know look like fools making a mess

[@dickmick5517]

Frankly I could do with less antics and more facts. Very little about costs, and everything fits perfect, but the exhaust, and no leaks or parts issues. Insert sarcasm here it you didn't get it. If only life was really this good.

[@djjesse1294]

Wow! This is a dream truck. Good job guys.

[@lorderfol]

Wow I didn’t know they could upload full episodes I’m surprised 😮

[@osvaldohectorfrick143]

Very good work. The truck was updated. Greetings from Buenos Aires Argentina (South America).

[@neozzickmixes3987]

Would love to see my dads old 72 c-10 get completely restored. Awesome work guys

[@johnbehneman1546]

THANK YOU SO MUCH!!!! I LOVE MY C10 FAMILY!!!! SO MUCH FUN!!!! A GREAT BUILD AND THANKS FOR SHARING!!! I LEARNED SO MUCH!!!!!

[@oGPoLa]

That's a beautiful truck.

[@alvizo0311]

Rather be watching this than my online school work

[@Sc00terBrew]

Would love to see an itemized parts and price list of all the goodies....

[@julianguerrero3787]

This 1971 c10 is so clean just imagine having it wish I had it ❤️❤️❤️💯

[@timmitzlaff8960]

Man, who ever gets this truck is so lucky!

[@rikiwakwak]

Guy on forklift, " Holler at me when the bone is stickin through" lolol

[@LSC.FOXBODY]

Now if I could persuade these guys to come to Texas and work on my 85 Mustang GT

[@sharpchedda8977]

These guys are the definition of organized chaos

[@strangetimes3511]

great Job - nice Finish!

[@SF-313]

I like these modern shape truck's

[@porscheguy09]

Tearing down a vehicle is where all the fun is at.

[@waferlane2548]

this is much better shown all at one time, thanks guys..

[@alexaloya7046]

My dream truck ..

[@HoustonKilby]

I like that color!

[@1stgreasemonkey]

nice.i learned to drive in one of those. 3 on the tree, it took two feet to push the clutch. no ps or brake.

[@egonzalez832]

Didn’t realize it was an hour long episode until I finished lol

[@robtaylor5141]

I don't understand why nobody drains the block anymore lol!! First thing I do before any cooling system maintenance...but it's understandable considering how excited this team was to get going on a cool project like this!! I just hate a messy floor, especially coolant! Sick C10 boys..Love it!

[@keithbrann5086]

SBC build I did I added brass petcock drains to the block - and I was only 19. They were super handy.

[@____MC____]

Scared to strip out the allen plug.

[@briandannels1908]

Good looking truck

[@1814Tai]

Great watch

[@gelandewagen4376]

the pickup looks great flashy

[@mikebiron7339]

Yet another Car\Truck show, where "amateurs" throw $60k worth of parts on a project just because, all the while using the worlds most expensive tools. Totally connects with those of us wanting to do the same in our own garages and matches our blue collar budgets. Nice job guys!

[@raymondguzman5083]

Lmao just make more money

[@thatrealba]

You completely miss the point of one week to "wicked"

[@jamesooten3659]

Check out Ed China's (original mechanic from Wheeler Dealers) You Tube show Garage Revival. He shows up at people's home garage with a van full of tool boxes & helps people who are stuck at a certain point in their build & helps them get over the hump (usually knowledge or skill related). Much better investment with your time than watching a bunch of clowns with impact wrenches.

[@thatrealba]

@@jamesooten3659 sounds interesting, I will definitely check it out. Thanks.

[@rm33321]

Thoughts exactly

[@johnsmith-qz4bv]

nice truck great work guys

[@user-fy3kd9qf2m]

I had this same year truck with a three on the tree!

[@MaffettMotorwerks]

Awesome series!

[@cbancman]

can't wait tell I finish my grandpa 86 C10

[@Shitty_bike_mike]

That's not a c10

[@MattRabbitDesign]

I'm glad these videos exist so I can see how my CPP sway bars are supposed to mount. They came with no instructions and the customer service is terrible.

[@nasrusaa456]

Big fan club of Thailand 🇹🇭🇹🇭🇹🇭

[@gustavorivarola6892]

Muy muy bonita quedó los felicito saludo desde Córdoba Argentina 💪🖒🏁

[@omar_padilla]

Ummm all I saw those guys doing is stand and try and look like they knew what they were talking about lol. And wow that's the cleanest garage I've ever seen not one drop of oil and the guys all perfectly clean hands lol.

[@Profabdesigns]

So another words..we’re going to use all bolt-on parts like we know what we’re doing, and then talk it up over and over again, trying to appear like were just soooo dang cool and know stuff!!

[@juanrobinson3981]

That is my dream truck good job u guys

[@davejohnson753]

It's Sooo Cool to be Sarcastic in the build world Dude!!! 🤔

[@TheCitybwai]

Not sure what’s not to like about this!👍🏾

[@gelandewagen4376]

one of the beautiful pickups like

[@patdmt2036]

Great job

[@abrahamhernandez1067]

Las 10 albercas más caras del mundo

[@Antmanlv]

Love the Kobalt tools.

[@genius-no5sl]

Oh my my my that is beautiful

[@christopherdyer2046]

Many hands make light work! I need more friends

[@bryanluntz1603]

Cool build guys Nice C

[@christ510]

Nice job guys kelp em coming. Next time video the engine at start-up and let us hear it roar! Then do the drive off with us watching a burn out.

[@javierpartida815]

Man you guys are badass👍

[@FreddyFunderbunz]

"Tell me when I'm in far enough,tell me when you can feel it"

[@dantemarasca]

Excelente trabajo, me encanta. Donde tienen el taller.?? Gracias.

[@omarbarrantes6671]

Felicitaciones ingenieros camioneta poderosa hermosa...

[@juliothunderbird943]

I really like the color of the truck.

[@jimhesse6563]

Love that truck !

[@ChevyCLongBedFleetsideTruck]

Great truck.

[@thabigghomie_]

Mannnnnnnn best 1 eva Nice wrk beautiful truck United Pacific & LEDs light Super strong ❤❤it

[@tzume7292]

How much does it cost all these modifications?(engine,suspension,ac,etc)??

[@federicorossini9566]

hermosa camioneta felicitaciones

[@drdpetizo]

How much $ for this build? Amazing. Is this show not on the app? Can’t find

[@pedrofernando176]

C10 top demais 🇧🇷🇧🇷👍👏👏

[@palucav1]

I love me a 65 C10 air suspension❤️

[@AvoozlPlays]

I looked up videos on this truck because of a scene in the movie Groundhog Day.

[@reliablelocksmithsecuritys5238]

Even hacks can get a TV show.

[@thetruckgods1059]

Ok I watched one video and all ready like it it more than anything I've seen

[@WelcomeToTheMadness]

You know what would be great, if you said how much all these parts cost!

[@indalecioalcaraz7263]

SUPER CHEVY TRUCK...PURE GM POWER

[@khattabos4512]

♥️♥️♥️ Amazing

[@kansasindependent4015]

Very Nice 🙂

[@nanceeleana]

I have a 1973 IH Scout 4x4 you can build next...

[@travisjohns744]

Yeah I should b workn on my own c10 and cj5 I'll get them finished one day

[@hoonage5]

sick truck! Didn't see a single torque wrench.

[@josephp8712]

hand me the torque wrench: proceeds to hand him the impact drill

[@SuperEliflores]

he got the power stance going at 4:56

[@tnddiving6166]

Father in law gave me a 71 short wide today. Starting the build tomorrow. It’s going to be really slow build. It’s not ran in 20+ years. But it was completely restored before he parked it lol. So I don’t know about the motor.

[@middlesiderrider]

I wonder how many cross-threaded bolts and stripped threads this truck has? I swear sometimes you can see the metal shavings flying when they impact the bolts down...

[@givininidze6687]

Yeah I taught that C10 was perferct from the start, would love to roll around the corner in my neighbourhood in that

[@southpawsgarage]

SAFETY NUMBER 1...LOL....

[@ernestovillasenor706]

Are you guys from Irvine California I think i saw Del amo Motorsports when you guys did the burnout

[@flinch622]

Transmission cooler... I like supplying the add on first, then routing through radiator cooler before return. Why? Two things. First, less heat put into coolant and second is cold weather: a little preheat helps hold moisture collection at bay in the transmission.

[@KensGarage.]

Watching this makes me want to spend all my money on my c/10

[@donaldfuller5041]

How are you controlling the torque converter lock?

[@KEL7000]

Nice👏🏾👏🏾👏🏾

[@armandolopezdj2855]

THOSE GUYS ACT LIKE THEY ARE A BUNCH OF ROOKIES

[@stevensrspcplusmc]

These trucks look better with a bench seat especially with a column shift

[@rayjos0424]

Yeah! I agree, that seat they took is beautiful. I'd love to have it for my truck.

[@jonathanbrito8296]

Wondering how much this beauty cost after all the work and parts

[@stvmassacre]

B E A Utiful. Nough said.

[@jeremymatthews5169]

Any idea what the paint code is for that grey?

[@tacianogentil8586]

Parabéns 👏👏👏

[@aryelwestberry8870]

Hello Taciano 👋👋

[@frankyortiz330]

Do a video on that 56 Chevy truck bro