2019+ Hyundai Veloster N Forge Motorsport Cold Air Intake CAI Install & Sound Clips

This is a video on how to install a Forge Motorsport cold air intake system and turbo inlet pipe with adapter. I've included sound clips of the car with the intake system installed. The system definitely increased the ability to hear the turbo spool up. You can hear the intake in the car with the windows up, but it's more pronounced with the windows down and outside the car. It has increased my wife's enjoyment of the car!
The system was delivered in just a few days from the date I placed my order. All of the parts were professionally packaged and arrived undamaged. I called the customer service phone number with questions about the product before placing my order. All of my questions were answered correctly as everything the representative told me held true, when I received my order.
Forge Motorsport Intake Kit
www.forgemotor...
General Tools
Trim Removal Tool Set - amzn.to/3k9pG00
Craftsman Tool Set - amzn.to/3ixW4sD
Craftsman Screwdriver Set - amzn.to/3CGJf69
Magnetic Multi-bit Ratcheting Screwdriver - amzn.to/3qmjt3J
Long Nose Plier Set - amzn.to/3VWZ67j
Long Reach Pliers 3 Piece Set - amzn.to/3IOq0L7
12pc Flex Head Ratcheting Wrench Set - amzn.to/3C4FZRg
Amazon Basics Ratcheting Combination Wrench Set - amzn.to/3OUibHk
Cordless Ratchet Wrench Set with Extended Head - amzn.to/3otVLSQ
Cordless Electric Ratchet Wrench - amzn.to/3WEnP2c
Tools for Wheels
1/2" 6 Point Metric Impact Wheel Socket Set - 15mm, 17mm, 19mm, 21mm, 22mm - amzn.to/3on5rOS
1/2-inch Drive Torque Wrench 10-150 ft./lb. - amzn.to/3WqcW44
Low-Profile Jack with Dual Piston Quick Lift Pump, 1.5 Ton (3,000 lbs.) - amzn.to/3WoBWZs
Audio Products Installed in Car:
Subwoofer
AudioControl LC2i Pro (Newer version of LC2i, Includes ACR-1) - amzn.to/3XSorBh
Rockford Fosgate 10" Powered Subwoofer - amzn.to/3JqgrmG
Front Speakers
Focal ISU 165 - amzn.to/3XlWB0S
PAC Speaker Adapters HKSB110 - amzn.to/3JOQ0qC
Foam Speaker Rings - amzn.to/3Nkl16l
Center Speaker
Dayton RS75-4 3” Speaker - amzn.to/3NmeTu9
Skar Passive Crossover - amzn.to/3CMnj9e
Metra GM 2.5 Speaker Adapter 82-3016 - amzn.to/3Xkg9Tj
Tools for Car Audio
Trim Removal Tool Set - amzn.to/3k9pG00
Fiberglass Wire Fish Line - amzn.to/46xSWBp
Tesa Tape - amzn.to/3Po9d5D
Dremel 3000 Corded - amzn.to/3qTUeWJ
Dremel 8220 Cordless - amzn.to/46xU9bV
Unibit Step Drill Bit - amzn.to/3DyTwBN
Power Wire Kits and Wire Accessories
T-Taps with Tool - amzn.to/42ZjsQZ
T-Taps - amzn.to/3psvbts
Wire Ferrules (Small Wiring) - amzn.to/3pl5L0V
Wire Ferrules (Large Wiring) - amzn.to/43U4VYc
18 Gauge Wire Bundle 10 Colors - amzn.to/46erf0d
16 Gauge Wire Bundle 10 Colors - amzn.to/3pkbhAZ
Stereo RCA - amzn.to/3JBJcww
RCA Y-Adapter - amzn.to/3l1P9JH
Mono RCA - amzn.to/3T8qsI2
Crimp Tool Large Gauge Wire - amzn.to/46jPnOO
8 Gauge Kit - amzn.to/46omscr
4 Gauge Kit - amzn.to/3PvtfeE
0 Gauge Kit - amzn.to/3NLsIny
12 Gauge Speaker Wire - amzn.to/44ifnrZ
Engine Bay ANL Fuse Holder (0 Gauge) - amzn.to/3CJTHcJ
Mini ANL Fuse Holder or Ground Block (0 or 4 Gauge) - amzn.to/44kq65v
For any vinyl products used in this video, please contact Grape Ape Ink Decals at [e-mail] or you can visit our shop on Etsy Grape Ape Ink Decals at www.etsy.com/s.... My wife and I own this shop
Disclaimer:
This is not a paid promotion.
This Channel is a participant in the Amazon Services LLC Associates Program. An affiliate advertising program is designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.
Feel free to comment or email me at [e-mail]
Please like, share, and subscribe for more content! Thank you
#forgemotorsports #velostern #hyundai #hyundaivelostern #kiastinger #nperformance #premiumautostyling #dongartechnologies #z-edge #rockfordfosgate #audiocontrol #colorlugs #lugnuts #wheels #eccpp #spoiler #splitter #velosterspoiler #velostersplitter #hondacivic #sounddeadening #siless #focal #dynamat #focal #daytonaudio #metra #skaraudio #Bose #bms #burgermotorsports #tuning #pedaltuner #throttlecontroller #wheeloverlays #wheeldecals #19"wheels #tuning #jb4 #hks #rearwiperdelete #SoCal #SoCalGarageWorks #wheels #GarageLine #wheelspacers #garagelinewheelspacers #boombaracing #bov #boombaracingblowoffvalve #blowoffvalve #soundclip #sxth #sxthelement #elantra #hyundaielantran #carbonfiberinterior

[@forgemotorsport]

Great video and really informative :)

[@nprform]

Thank you! I look forward to making more videos about your products for my wife’s Veloster N and my Elantra N.

[@MrToppramen]

Superb video man

[@nprform]

Thank you!

[@MrToppramen]

@@nprform I have that forge intake and am just debating of if I want to deal with installing an inlet or not haha

[@nprform]

@@MrToppramen I would say it’s worth it. It takes a bit of patience, but it’s not that bad.

[@desiretodetail7591]

Great vid. The DCT is an awesome car, can’t take anything away from it👍🏾

[@nprform]

Thank you!

[@jonty3000]

hey nice vid. Its a shame the intake noise is not louder from the outside

[@nprform]

Due to my camera setup it may not be coming through as loud as it actually sounded. We are very happy with the level of sound the intake makes. It was worth purchasing.

[@Damo1998]

I have the exact setup in red and it's much louder than what it picks up on camera

[@nprform]

@@Damo1998 it’s definitely hard to pick up on camera.

[@iadoremelissa12345]

Question. Is there anything else done to the car for sound? Like a blow off valve or anything? Or did all that extra sound come from just the intake ?

[@nprform]

In this video, the only thing done is the Forge Intake. The exhaust is stock with no modifications.

[@iadoremelissa12345]

@@nprform thanks for the reply. I recently purchased a VN and couldn't believe how quiet it was but definitely going to order a cold air intake for it now that I know they actually make a difference in sound

[@nprform]

@@iadoremelissa12345 I can guarantee it makes a difference. I put a Forge intake on my Elantra N after hearing the difference it made on my wife’s Veloster N. The sound is great. It makes me want to get on the throttle all the time! Lol

[@iadoremelissa12345]

@@nprform thank you! I definitely will order one. Any heat soak from now having the filter inside a box ?

[@nprform]

@@iadoremelissa12345 No, I didn’t notice a heat soak issue. The filter is made large to compensate for heat soak. We also installed a new intercooler. The intercool made a noticeable difference with heat soak.

[@magyverboles7947]

Will the flutter hurt our turbo? I have an HPS cold air intake now and i can hear the flutter

[@nprform]

Do you hear it when you’re on the gas or as you let off the gas?

[@magyverboles7947]

@@nprform when i let off the gas

[@nprform]

@@magyverboles7947 A small amount of flutter is normal, when letting off the throttle. If you have flutter, when your on the throttle, this would be an issue.

[@magyverboles7947]

@@nprform ahh okay thanks!

[@marcussanchez28]

You get a tune with this?

[@nprform]

We haven’t tuned the car at this time.

[@CBR4Hondo]

I have a cat back MBRP active exhaust and takeda open intake on my 22 VN 6 speed I really with I would have gotten the Forge Can’t hear the takeda at all :(

[@nprform]

Thank you for the information. We had originally looked into buying the takeda, due to its looks, but chose the Forge due to the fact my wife wanted something with more presence in the engine bay, since we go to car shows a lot and because of sound clips of the intake. It was a good choice.

[@johnnyappleseed9568]

Dct tho? Damn should have went 6mt

[@nprform]

My wife and I both have DCT’s. Manual and DCT are both great, can’t go wrong with either transmission.

[@kwilt]

The DCT is amazing on this car. I went from a manual (Subaru WRX) to a DCT Veloster N and I’ve never been disappointed by it.

[@opadilla123]

Worst filter ever its the best filter for heat soak

[@glenbregmen4825]

I have this same intake on my 130n along with a turbosmart dual port bov, the combination sounds unreal.

[@glenbregmen4825]

Only heatsoaks when stopped at lights or traffic, as soon as you move Temps instantly lower.

[@RioPetersen]

With the Forge FMIC you will have no heatsoak.

[@Wazza722]

Cold air intake? It’s sucking in hot air from the engine bay. The standard air box with a better filter would work better!

[@UN3ARTH]

What I was thinking

[@hectorelizondo1354]

Any recommendations?

[@Damo1998]

I have an i30N dct with this setup and it sounds fantastic! I also have a brola atak cat back on the way which will add more to the car :)

[@nprform]

Nice!!

[@loganschutte3093]

Need more details on the wire harness connected to the turbo inlet. How do you pop that off

[@nprform]

You have to push a screw driver into harness where it clips onto the metal extension attached to the turbo inlet pipe. You should be able to see where there harness is clipped to the bracket. Take the screwdriver and push it into the clip, this will release the harness from the bracket saving you from having to remove the bolt holding the bracket in place.

[@loganschutte3093]

The video helped out so much and was way better than others in my opinion! Will be following yall through the journey

[@nprform]

@@loganschutte3093 Thank you! I’m glad it helped. We have more videos to come. My wife and I have a car problem, so we’re constantly coming up with more things to do to our cars. 😂

[@rinXneko]

does the stock turbo works on this? ford focus st mk3

[@nprform]

I’m sorry, I don’t know if the Veloster’s turbo will work on another vehicle.

[@edwinmarcano4331]

Sounds phenomenal

[@tirgod100]

Never understood why these intakes are called cold air intake when the placement is in the engine bay where the air is much warmer than when the intake is places in the front where actuall cold air is comming into the mask... what a joke