2019 Silverado Sierra How to take apart Side Mirror

[@walteriraparksjr2622]

This video is the best one on KZbin! This worked for my 2020 GMC SIERRA 1500 AT4.

[@timtrask2179]

Busted up my factory mirror. Now i know what i need to do to replace! Thank you!!!

[@jess5.019]

Wear can you buy the replacement mirror

[@timtrask2179]

@@jess5.019 lots of research. The part numbers have been superseded and changed. It was very difficult to get the correct part. With crazy backorders right now, good luck. Sincerely. Try Amazon first, then GM parts discount sites.

[@jess5.019]

@@timtrask2179 thanks , trying look for one , I don’t want have get the whole mirror, when I can just change the mirror . Thanksv

[@timtrask2179]

@@jess5.019 i have left over parts from my replacement. If you only need glass I can hook you up. Let me know what side and details. [e-mail]

[@Barbas1197]

@Tim Trask you have any problems installing it back together? I cannot get it to snap back in

[@oak1117]

Thank you. This helped fix a 2021 Silverado.

[@whooops6147]

Great video! I am going to translate this info to my 2016 Silverado. I think it is generally the same idea. Thanks for sharing this. It will save me much frustration.

[@rporschen]

Used a 6MM box wrench on the small push together tabs, worked really well up in the corner of the cap.

[@randyferguson2532]

Awesome video! Saved me hundreds of dollars. This one and the one about removing the door panel were great! Thank You!!!

[@papa6059]

who else crashed

[@tchiz5603]

great video on mirrors. Do you have a video on replacing the gear that actually rotates and folds the entire mirror assy flat against the door? Apparently the gear splits along it's shaft not allowing the mirror to fold in (like when going into a auto car wash bay)

[@barrete1]

Thanks for the how to vid…made replacing my mirror a piece of cake. 👊🏻

[@Barbas1197]

How’d you do it man? I’m having such a hard time installing it back together.

[@DR0CK]

I noticed in your last video, and now this one. A beep in the background. It sounded so familiar, I thought it was my house. Change your smoke detector battery! Lol

[@leamangriffin]

Haha stupid thing... i have a brand new pack of batteries too!!

[@Jimbo388388]

Anything different going back on, like screws first for last? I’m changing my front lights. I know this one doesn’t have but should be about the same. Can’t get them lined back up

[@prettybrittany_]

THANK YOU! I damaged my rental car that happens to be a GMC and I successfully took it apart and fixed it with as a woman with long nails . clear and to the point

[@CadenFrazier-j4j]

when i took my shroud off the back came loose and popped off to is that bad?

[@joeortegausmc]

Thanks bro, trying to fix my mirror. I have to replace the wires too. 😮

[@carlohuerta129]

nice! thank you

[@MrRandall2314]

Great video, thank you!

[@joefetters5805]

I've got the passenger mirror glass broken on my 2015 Yukon XL- any idea if the fix is the same? Thank you!!

[@THEHORSELOVER235]

Howd u put the glass back on?

[@klutch14u]

If anyone else stumbles on this video, these mirror caps are the easiest of any gen GM full size truck I've come across to remove/change. You do NOT need to disassemble the mirror and can just remove the cap itself. There are 2 clips holding them in, that's it. The big plastic hooks inside (if you have replacements in your hand wondering what they're for) do not attach to anything. I assume they're part of the paint process (to hang and paint) and/or final assembly purposes. All that leaves is the 2 pinch clips that go straight in. All you need to do is get a interior panel pry tool in between the cap and main body and pull outward, NOT UP. They're located at either end of the mirror, at the end nearest the glass and one at the other end nearest the road. If you pull TOWARD you rather than up they'll pop right out. The hardest part is getting the trim tool started. Use a super thin one and then graduate it up to bigger sizes. If you start at the end nearest the glass and get it to pop out it's really easy to get the other one to release. Just don't bend/torque anything, pull straight out toward you and shouldn't break anything. This may not be the case with the chrome caps, they're notoriously brittle but if you're real careful they shouldn't and both sides won't take 10 minutes. That being said this is a great video if you're doing it this way and well explained but there seems to be a misconception about having to disassemble these mirrors to change the cap.

[@Shortsviral1983]

Thanks for the video I accidentally broke my mirror so now I can replace it

[@waldeckalex]

Thanks!

[@XxChicagoGuyXx]

That would've been good if you could put that out there video in the description because I can't find it

[@ChrisLab-lo4ff]

What is the circle piece that the mirror clip to is called ? Anybody

[@steventanner864]

Thanks for making this video. I just had to piece my mirror back together after some destroyed mine.

[@xxflash-ninjaxx4662]

Anybody know where i can buy a replacement for the whole housing?

[@muzzlebrake100]

My 2019 High Country mirrors look nothing like this inside.

[@Pyrojodge1]

Good video but man... please for the love of god replace the battery in the smoke detector.

[@amandacasanover5418]

Lets say a wife hits a mailbox with side mirror and it came apart, and it won't pop back together? How much trouble is she in? By she I mean me...

[@kansasoutdoors6297]

It’s sorta a pain if the tabs are broken.