2020 Can Am X3 XRC and 2023 Can Am X3 XDS CUSTOM CAGE BUILDS | Shop Update

in this video we show you a couple update along with 2 cage build we've been working on, a 2023 can am maverick x3 xds full cage build with front and rear bumpers and a 2020 can am maverick x3 xrc main cage build. both were a lot of fun to build and we appreciate everyone trusting in us for their can am needs. we are now a fully licensed LLC in the state of Pennsylvania so if you looking for repair work or cage building shoot us an email.
Please remember to click the like button and be sure to subscribe to The Can Am Crew to help us grow and to stay in touch with all our awesome adventures...
WAYS TO SUPPORT US:
Become a Channel Member and get Behind the Scences Info
/ @thecanamcrew
You can get Merch and GPS Tablets and much more on our Website www.thecanamcrew.com
Support us on Patreon - www.patreon.com/thecanamcrew
follow us on facebook
/ the-can-am-crew-139518...
follow us on instagram
/ jhatch_x3
/ thecanamcrew
The Can Am Crew LLC Line Up:
Jesse:
2019 Can Am X3 Turbo
120HP 64"
32" Maxxis Roxxzillas with 5-2 offset wheel STI HD10
WS150 Whalen Tune
HALO 30 Front Diff with Turner Eagle Level 2 Axles, Stock Rear Axles
Super ATV High Clearance Trailing Arms, Stock Front A-Arms
Heated Simpson Seat
Built rear Drivedhaft by me, .095 DOM rear and 2022 style front
Custom Built Cage by ME .120 Wall DOM all the way around 1/16" Steel Roof
Badlands Apex 5500LB Winch, Pre Runner Front Bumper
EBC Sintered R Brake Pads
Stock Radius Rods with a LMUTV Pull Plate
Sheri:
2019 Can Am X3 Turbo
120HP 64"
32" Maxxis Roxxzillas with 5-2 +30 offset wheel STI HD7
WS150 Whalen Tune
HALO 30 Front Diff with Turner Eagle Level 2 Axles, Stock Rear Axles
Super ATV High Clearance Trailing Arms, CT Raceworx Lower Front A-Arms
Built rear Drivedhaft by me, .095 DOM rear and 2019 style front
Custom Built Cage by US .120 Wall DOM all the way around 1/16" Steel Roof
Can Am 4500LB, Pre Runner Front Bumper
EBC Sintered R Brake Pads
Stock Radius Rods with a XRC Pull Plate
Scott:
2020 Can Am X3 XRC
72" 195HP
TCP Radiator
35" maxxis Roxxzillas on stock 6-1 beadlock wheels
CTRaceworx Radius Rods
Welded Spooled Smart Lok
Badlands 5500LB winch Stock Bumper
Super ATV High Clearance Trailing Arms
CHECK OUT OUR SPONSORS
Ben Franklin Range Offroad Park
PA's best offroad park located in Templeton just outside Kittanning
www.benfranklinrange.com
Big Earl's Campground
Located near the Hatfield McCoy Ivy Branch Trail System and direct trail access to Little Coal Outlaw Trails..
/ big-earls-campground-4...
www.bigearlscampground.com
Devils Backbone Adventure Resort
Located on the Hatfield McCoy Devil Anse Trail between Rockhouse and Buffalo Mountain Trail Systems
www.devilsbackbonewv.com/
Alpha Powersports and Specialized Vehicles
Central PA's Finest Can Am Dealer and Outboard sales....
www.alphapowersports.net/
hilltopescapewv.com/
Hilltop Escape offers vacation rentals and a restaurant on site with a popular trail access location. Campground and Cabins available and they are located directly on the Indian Ridge Trail System
Sam the Concrete Man
Finest Concrete Man in Ohio
Check his page out on facebook
My Closet Guys
www.myclosetguys.com
Custom Build Closet System Experts
We are known throughout Southern Maryland and Northern Virginia as the premiere organization and storage space experts. Here at My Closet Guys, we provide custom closet, organization, and storage space solutions for home and commercial use.
Ride Royal Blue ATV Resort & Campground
www.rideroyalblue.com
Ride Royal Blue has over 50 cabins and 100 campsites located in Pioneer TN and has direct trail access to over 600 trails. located up against royal blue and the sudquist trails, you can ride right to tackett creek, brimstone, new river unit and windrock right from there place.....

[@davehastings3713]

I commented then continued to watch the video, so I have an additional comment. U have no reason at all to be half embarrassed at all. U all should be proud. Zip tie and Skinny pedal Sherri (SPS). Great channel with a healthy family in this insane world with the best context. Thanks guys

[@chrismcleod2465]

Craftsmanship is spot on and those long grab handles look sweet

[@filitamayo]

That's cool of you sharing your progress of the older home converted to your garage. 👍🏻

[@brandonstaley1289]

Those grab handles are sick! Appreciate the story about the garage. I like that you guys are personable and show/share personal stuff with us.

[@TheCanAmCrew]

Thanks you 👊🏻👊🏻

[@shaunworthington4663]

Cool garage story, personally I think it’s awesome the way it is. So much history.

[@burgpath7777]

Cool reuse of that house. Can never have enough storage! Great work on that cage for the orange SxS!

[@jaredjohnson7097]

The cages look great. I like the garage and the history about it.

[@pete1735]

I have no freaking words damn them welds are beter than factory you guys are sick building cages and the grab handles are sick.

[@willklein9227]

Love seeing the builds as much as the rides. Tim & Amy's cage looks even better in person! This video felt like I'm hanging out with some good friends...really enjoyed it.

[@marktaylor2309]

Love the cages. Real talent right there. Great job.

[@TheCanAmCrew]

🤙🏻👊🏻

[@jesusvaltierra8019]

That's so awesome how she's there doing it up getting that cage going !!

[@9253349]

i liked the grab handles. Neat story about your garage. You build some nice-looking cages.

[@TheCanAmCrew]

Thank you 🤙🏻👊🏻

[@judyhatch365]

Great job. Love the design on the back 😊

[@numbcuts5936]

You shouldn’t be 1/2 are any ashamed of your shop! You should be proud of what you done! Proud of your hard working ethics that your whole family has! It’s the American way. It’s here for us to take! Hard work is what you’ve done! Your receiving your blessing!

[@TheCanAmCrew]

Thank you. I appreciate that 🙏🏻

[@pete1735]

That bumper is freaking awesome its my favorite

[@TheCanAmCrew]

Thank you. Mine too haha.

[@scottshepherd8304]

Don’t go woke be happy with what you got that’s what what makes it good

[@1Rockaddictsoffroad]

Awesome job on both cages. They turned out awesome. Keep up the great work.

[@harlincolkmire933]

You do awesome work brother that looks great

[@SuzeM_C_GravityRider]

Great Job! I also love the grab handles & garage story!

[@eddiebyrne8984]

Wow the cage on Tim's machine looks great i like it the color really stands out with the black

[@fatkatz84]

Amazing work. Keep it up.

[@ohvfun4198]

The cage looks great! I though you were going to cut off the ends on the rear bumper so they wont snag anything. But it still looks great your one talented guy!!!! keep up the the great work and content!!!

[@TheCanAmCrew]

We were going to but if we did then the lower bar below the brake light would have to be in the center of the brake light and wouldn’t like right. So to be aesthetically pleasing we had to leave it where it was so the lower bar would be outside of the brake light.

[@stevebollman]

Really enjoyed the garage story. Never knew that was a house. Pretty cool idea, and I'm sure, it was a lot of work. Good job as always Crew!!

[@shawnwalters3931]

Keep those cage videos coming love watching them come together

[@aod8867]

I mentioned in the last video, you needing a bigger garage. I follow with your restrictions. That's a shame. Pretty wild on the renovation of that home. Great job! And as for the clutter, that's what makes you guys great! You're just normal folks who know what you're doing. Awesome channel. I look forward to the next adventure.

[@TheCanAmCrew]

Thanks man. Appreciate it.

[@bjayers1606]

Thanks for telling about your garage. Great story

[@davehastings3713]

Wow, I have wondered bout the doors in the garage. Very interesting. Nice job on the conversion. Ur very intelligent and handy. Really enjoy ur channel. My absolute favorite. Thanks guys.

[@TheCanAmCrew]

Thank you 👊🏻👊🏻

[@scottcarter7046]

Can't wait for the polaris build. I love how the whole family works together. Not enough of that these days. I also like the garage kind like an older industrial type look inside.

[@KnownSender1]

Great cages for sure 💯👍

[@bjayers1606]

Keep up the good work ...thank you.. i notice you respond to every comment in some way .your a stand up guy with a good family

[@TheCanAmCrew]

Thank you, I try to respond as best I can. 🤙🏻👊🏻

[@timshipe6674]

Thanks again for doing such an awesome job on my cage. Its everything i was hoping for then some, looks great and the build quality is amazing. Im sure it will get tested but have no doubt it can take it lol

[@TheCanAmCrew]

👊🏻👊🏻

[@ramonruybal9808]

Nice job on fabrication!!

[@TheCanAmCrew]

Thanks 🤙🏻👊🏻

[@p.t4769]

Excellent job, love watching y’all do it as a family 👍, I know about those shop cleanings, I have to clean in between projects or I can’t find my tools😅, great video as always

[@marklowe330]

Personally i would not spend the money on cosmedic for a shop you hope to leave behind at some point. Looks like a functioning shop to me. I enjoyed you sharing the story behind the shops creation. I like the curved top cages but I really did like the flat top with the long grab handles. You all do some nice looking cages.

[@TheCanAmCrew]

Awesome. Thanks.

[@MrEsimmons178]

love seeing the shop videos and builds. From start to finish for one cage like this how long does it take you? I also like how you see the start and finish in the same video, keep up the great content.

[@TheCanAmCrew]

Since we’re not full time yet we need 1-2 weeks for a main cage and 2-3 for an exo cage build

[@MrEsimmons178]

They look really well made. It’s nice to see someone building a quality product and not cutting corners. I like seeing the whole family helping out too.

[@Bradp6509]

Cages look great!

[@TheCanAmCrew]

Thank you

[@jacobadams7540]

Thanks for giving us the run down on your garage/ house.... I always wondered why those doors were halfway up the wall... 🤨🤔🤣 How cool would it be to win the cage build! Somebody gonna get lucky, I hope it's me! I would love to advertise one of your cages... I like the full wrap around exo Skeleton style

[@TheCanAmCrew]

🤙🏻👊🏻

[@mitchelljude4198]

u do good work

[@TheCanAmCrew]

Thank you.

[@mikebeatty7522]

Great job guys you rock

[@TheCanAmCrew]

Thank you.

[@terrymastalski3625]

Sherri’s lucky the only thing she got was a spark on the foot. PPE

[@tnmomma7491]

Move on to east TN!!! 😜

[@bstewy]

Awsome job guys... still trying 2 hit that lotto.. im glad 2 see you guys busy with all these builds.. shows you guys do awsome work..!! What do you think on the new maverick "r"... ??? Keep on keepin on...!!!!

[@TheCanAmCrew]

Thank you. I actually really like the new maverick R. There’s not much about it I don’t like and I can’t wait til I can see one in person and get in the drivers seat. I will say that I think it’s definitely got a place out west so not sure how well it will do out this way. Time will tell

[@bstewy]

@TheCanAmCrew same here .. really wanna drive 1.. but here in nw ohio 77" is a bit wide.. I do like the trans better then the belt.. if had a 3rd petal I'd deff buy it.. was goin 2 buy a yxz but glad I went with cam an... way better machine..!!

[@chadgummo484]

i need a sticker for my hardhat!!

[@TheCanAmCrew]

Message me your address and I’ll get one sent out to you.

[@chadgummo484]

@@TheCanAmCrew 707 morningside ave altoona pa 16602

[@ryangodbey7407]

Pack up scott and come down to wv

[@TheCanAmCrew]

WV videos coming soon!!!

[@melissaparker5180]

❤

[@gregroberts5644]

Thanks for the great content. When I bought my 2021 max I had a rattle I had a hard time chasing down because I would never suspect a dealer would let something off the lot like they did. The heat shield was rattling and fixed that but there was still that annoying rattle on the trails. Then the day came when I finally laid it over. Not a hard layover but it still just barely touched the rollcage and broke the plastic piece covering the rear mount on the rollcage. One bolt missing and the other three were crossthreaded and not seated at lest 1/2 to 3/4 inch. Immediately checked the other side and ond bolt was missing there. Replaced all the bolts and and inspected the cage. No damage at the time but after a a few weeks the paint cracked off a weld with no visible cracks but I know one just has to be there. You are quite a way from me but you do a great job. What do you charge for a cage on a 21 max x3

[@TheCanAmCrew]

The cages do only come with 3 bolts in the rear of the cage for some reason. Always thought that was odd. Depending on what type of cage you want and how elaborate it will be would determine cost. Average is 1600-3200 for a 2 seater. 3 seater would be 2400-4000

[@oldmanbs1]

How long did it take to do Tims? When I eventually roll my 2023 xrc I would love one of those cages……. Great work CAC.

[@TheCanAmCrew]

We need 2-3 weeks to build our cages. We’re not full time just yet.

[@oldmanbs1]

Love the look of your cages, the videos and the great family interactions.

[@trailrzr5580]

Can you use rattle on the stock cage? I’d like mine to be red.

[@TheCanAmCrew]

Yes you can. My cage (Jesse) is rattle can yellow.

[@scottshepherd8304]

What will you do with the new canam do you like it or not

[@TheCanAmCrew]

I do like it. I’m excited to check one out in person.

[@damienstark6901]

I have a 23 rc about how much does a cage like the first one on this video?

[@TheCanAmCrew]

There’s a few variables as far as grab handles, roof, gussets, intrusion bars and paint or powder but you’d be around 1500.00 or so

[@damienstark6901]

@@TheCanAmCrew thank you for getting back i for sure might be getting back ahold of you with plenty of heads up . I’m not in any hurry at all

[@tomsturdevant2923]

Hey Jessie are you strictly doing can am cages or would you consider doing a talon?

[@TheCanAmCrew]

We would love to add a talon to our build list. We have can ams, KRX and rzrs so far.

[@tomsturdevant2923]

@@TheCanAmCrew I’m like 3-3/12 hours away from you I’m going to be at Ben Franklin range September 23 ..let me know and I can give you my cell but definitely interested in having you look at it!!

[@TheCanAmCrew]

@@tomsturdevant2923 ya for sure, send me an email at [e-mail] and we can go over details there.

[@SGTCap1980]

what would a cage like the red one run me minus the rear bumper

[@TheCanAmCrew]

A cage just like Tim’s with a front bumper only would be about 2200.00. Painted and installed.

[@mikeorr8994]

So a full cage like yours I'm guessing 2500?

[@TheCanAmCrew]

@@mikeorr8994 a full cage with rear bumper is about 3000.00. It required more bungs and tie ins to the frame or pull plate and more bends to mess with.

[@michaelward6755]

How tall are the b pillar tubes?

[@TheCanAmCrew]

Around 6 1/2 Inches

[@michaelward6755]

@@TheCanAmCrew you wouldn’t happen to remember what angle the A pillar is cut at would ya?

[@filitamayo]

How much for a 2021 can am maverick x3 turbo rr 4 door .

[@TheCanAmCrew]

There’s a lot of variables that go into the price of a cage. A basic cage would start at around 2400.00 for a 4 seater. If you’d like to discuss it more please send me an email at [e-mail]