2020 low rider s drag specialties 6.5inch installation

[@beckjacob]

I initially did the 5.5" risers with no issues and have decided to go to 6.5" I was on the fence about the wire extensions and after talking with a few others who have done it, it appears like there is enough slack in the wiring once you pull the excess signal wires from the hand controls. I pulled about half the slack when I put the 5.5" risers on and I have a ton of slack left in the wires still routed through the upper triple. I did source a stock lowrider upper clutch cable so I can keep the clutch routed through the upper triple clamp like stock. Video was a great help, thanks!

[@affyentertainment7418]

That's awesome man I'm glad it worked out for you I didn't realize the slack at first so I got the extension and it kind of looked tight when I was turning the bars but that good man

[@motoberraco]

Hi @beckjacob, please could you confirm, with the 5.5" risers is no necessary to use wire extensions for the throttle and turn signals? All the original lines and wires works well with the 5.5" ? Thank you

[@EddieFresh3]

I'm hopefully picking up a 2021 fxlrs tomorrow, this might be the first thing I do. Thanks for the video!

[@affyentertainment7418]

Don't let the dealer sell it to you more than 17999 and you can have them throw in the first service 😉

[@EddieFresh3]

@@affyentertainment7418 that's what I'm thinking. Either free first service or I want the service manuals free.

[@russelrides3218]

@@affyentertainment7418 how much was your OTD price? And what state?

[@affyentertainment7418]

20k

[@motoberraco]

Hi! Do you believe if with the 5.5" drag risers is no necessary the turn signals and throttle wires extensions? Thank you for the video, excellent work.

[@affyentertainment7418]

@motoberraco turn signals you might be good but I'm not a 100%sure about the throttle

[@edisonandresalfaroleon2235]

Hi, Can you help me with the details of the extension that you adquired to install, I mean the cables... And in additiion, any issues adter with the clutch and brake modification?

[@affyentertainment7418]

For the clutch I just rerouted the cable and same with the brake

[@edisonandresalfaroleon2235]

Ok thanks.!, I think is the best idea for brake and clutch,,, but my point is related to the electrical cables,,, I´m trying to get the codes or serials to buy the cables here in Local HD in Chile, they says that dont have stock; I need to buy in USA, do you have the serials?:

[@affyentertainment7418]

There are only 2 types, and both work, there is a long one for ape hangers and short ones for risers. If you ask just for wire extensions, they'll know what you are talking about,

[@sheldonsaenz8731]

Did the same risers on my FXLRS and it makes a great difference. I plan on going up to a 8.5" riser

[@affyentertainment7418]

That's my plan once I get the brake line and clutch line

[@sheldonsaenz8731]

@@affyentertainment7418 have everything just need to do it 😅

[@affyentertainment7418]

@@sheldonsaenz8731 I'd help you out if you were in fort worth lol

[@wojciechhaase]

@@affyentertainment7418 is it because you feel you need more pullback? I am also 5'6" and thinking about those 6.5" risers, but if you need 8.5" then I am likely to benefit from it too.

[@affyentertainment7418]

@@wojciechhaase I went the other route and did 14"apes but if I hadn't I'd have went with 8.5 or just 10

[@fauziahmad7877]

nice video , can you tell me the exact length of the 5/16 Bolts that fits in those risers clamp, 1 inch , 1 1/2 inch or 1 1/4 inch Length ?

[@affyentertainment7418]

I think it's 1 1/14 but I'm not sure I don't remember honestly it's been a while and I sold that bike

[@marvinr5054]

Thanks for the video But your change your seat which is not a true comparison because the Saddleman moves your seating position back about one inch. It would've been nice to see you do both profile pics with the stock seat. Thank you for showing the process . Can you please list the parts# that you had to purchase?

[@affyentertainment7418]

you are right about the comparison pics I should have done both with stock seat, i was thinking about overall seat and raiser differences. the PN of the raisers are in the video and the bolts i just went to HD dealer they were $4 for 4 of them 5/16 and length is 1 1/4

[@marvinr5054]

@@affyentertainment7418 Thank you responding with the info. your doing a awesome job setting up your bike.

[@affyentertainment7418]

@@marvinr5054 thank you sir ride safe and enjoy!

[@titopaiz1244]

Please let me know if our 4 inch extension cables would be enough for the during signals thank you good job on it looks good

[@affyentertainment7418]

Are you doing 6.5 inch risers? If so then 4in extension will be plenty

[@TonyStewardokc]

So, there is slack for the signal lines at the blinker. If you loosen the handlebar controls you can push about an inch or so through for those cables. After doing extensions, and see how the length plays out - do you think gaining that slack would have kept you from needing the extensions?

[@affyentertainment7418]

possibly yes but it might have a bit tight when turning the handle bars to the right, and honestly the extension are not that expensive $32 for both from HD dealer

[@TonyStewardokc]

@@affyentertainment7418 I have that on the way with the risers. Thanks for your video. It was VERY helpful, especially as you encountered challenges.

[@affyentertainment7418]

You're welcome and Goodluck

[@Gmart1122]

What are the extensions called that you purchased?

[@RobertJenny10]

Do you know if they will fit a 22 Fxlrs? Great video and very informative 👍

[@DannyHDFURY]

Can you tell me the exact size of the Bolts that fits in those risers. I have the same problem in my iron 883 and where we live we have a metric system

[@affyentertainment7418]

Drilled and tapped for 1/2"-13 riser bolts

[@miltonbernal7344]

Where did you get the extension for the turn signal and throttle? I am installing my 6.5 riser 2" pull back and I think I will need those extensions. Link?

[@affyentertainment7418]

Yes you do, I got it from the harley-davidson dealership but I am sure you can get them from ebay as well

[@josephoh2176]

Hi... great video. Do you know if the same product will fit on 2021 Low Rider S?

[@affyentertainment7418]

I don't see why not, it fits most HDs no problem

[@SalesFour-mm8pq]

WOULD A 4 INCH EXTENTIONS WORKS ? OF RTHE TURN SIGNALS

[@nickoladocious]

Did these risers end up helping out with the cramping between your shoulders? Just bought a low rider s and going through the same issue

[@affyentertainment7418]

It did but I was getting numbness on my arm so I ended up changing to mini apes but if you like the risers go with 9 inches

[@dyna_dirtbag2505]

Nice video 👍🏼 What is the total height of your bars and risers now?

[@affyentertainment7418]

thank you, it about 10.5" really comfortable for me.

[@JR-eq3qh]

You used stock riser clamp with those risers ???

[@affyentertainment7418]

Yes

[@JR-eq3qh]

You recommend those risers? I think I’m going to go ahead and buy the 8.5 risers

[@affyentertainment7418]

8.5 would be much better but you will need all the extensions and new brake line and clutch cable

[@JR-eq3qh]

@@affyentertainment7418 thank you for taking the time and getting back to me I appreciate it !!! Be safe

[@1872reden]

Hi, where did you bought that risers?

[@affyentertainment7418]

Ebay

[@harleycammack6628]

What’s the part number for the wire extensions?

[@affyentertainment7418]

sorry for the late replay, I don't remember but i just went to hd dealership and they had it in stock.

[@1stHdFXLRS]

Bout to do this. So u just needed turn signal extensions and throttle? Asking because i was told by the local parts guy at the dealer said the throttle cables are pretty long.

[@affyentertainment7418]

If you think you'll go taller risers or bars later on it is better to extend them all beside the control. But the throttle side is pretty tight I would change it it's only $20

[@ahmadzohurasas500]

Thanks for your useful information

[@affyentertainment7418]

you're most welcome!

[@Tyler-sw9jl]

What are the exact wire extension lengths you needed for the turn signals and throttle by wire? Did you need switch control extensions too?

[@affyentertainment7418]

I got the 12" ones for all of them cuz I know I was gonna change to apes which I did

[@michaelferreira8746]

Just cut the bolts down? Yes?

[@affyentertainment7418]

You sure can but they're cheap

[@WARPED._.VISION]

Personally I wouldn't recommend drag specialties risers it's a very soft metal the threads get tore up easily and it just feels unsafe you get what you pay for id go with bung king or thrashin supply

[@eatangeles]

did you change the bushing?

[@affyentertainment7418]

No

[@eatangeles]

@@affyentertainment7418 thanks man

[@affyentertainment7418]

No problem buddy

[@nicknnr6493]

What's the pull back on these risers, 1" or 2 "

[@affyentertainment7418]

I believe it's 1 1/2"

[@eatangeles]

what’s the lenght of the 5/16 bolt you bought?

[@affyentertainment7418]

1 1/2"

[@JR-eq3qh]

Hey boss did you have to change out any cables or lines with the 6.5” risers ?? Bike looks great

[@affyentertainment7418]

Just the signals, it will still work if you use the slack from the bars to give it more length but the extensions are cheap so why not

[@JR-eq3qh]

@@affyentertainment7418 appreciate you thank tou

[@jettav88]

How tall are you? Very close to buying one, Thanks

[@affyentertainment7418]

I am 5'6"

[@jettav88]

@@affyentertainment7418 Thank You

[@darktimbercustomknives6248]

For something like this u should definitely take time to elk the difference in how if actually feels

[@affyentertainment7418]

I was gonna make a video of the test ride but changed to apes soon after

[@rrm80916]

Do you have the part number for the cable extension you used, I can't find it anywhere on the Harley-Davidson site

[@affyentertainment7418]

I will find it for you buddy

[@affyentertainment7418]

69200034 69201796

[@rrm80916]

Thanks man!

[@affyentertainment7418]

@@rrm80916 sorry took so long

[@kuyakulots2823]

Where did you order it?

[@affyentertainment7418]

Ebay

[@Matt_Yniguez]

Would those stock wires have worked if you just ran them on the outside near the gas tank instead of buying longer wires?

[@affyentertainment7418]

Probly but extensions aren't that expensive plus looks a lot more cleaner

[@onestallgarage2720]

So your gremlin bell is to be at lowest point of your bike so you have it in the wrong spot

[@bobberguy1]

According to legend, gremlin bell should be at lowest point on bike.

[@affyentertainment7418]

I don't hear it enough lol but it has been relocated