2020 Toyota Rav4 Trailer Wiring Harness Installation

[@bonniekim-ramirez1030]

Thank you so much. This is the step by step tutorial. I found this video after watched a couple of other tutorials, and this is the best!!! My husband and I were able to install successfully. Thank you!!!

[@trailerhitches]

Glad it helped!

[@charleshoffman9705]

I managed to set this up using a Curt brand wiring kit. The installation was the same, except instead of using a Y splitter, I used splice clamps to form the brake/turn/running connections. Make sure you use a multimeter to troubleshoot electricity flow issues if you go this route. Excellent tutorial.

[@trailerhitches]

This video is for the T-Connector and not a universal kit as you describe. Great job none the less!

[@raymondfrank799]

I hooked it up exactly. Got everything done. Put the fuse in. Checked with my plug-in tester. Everything worked. My wife came home drove about 10 mi. The turn signals went out. I checked the fuse. It was good. You can hear them blinking but no lights. I unplugged the unit, plugged it back in like factory and still nothing. Not for sure what happened. You have any ideas?

[@trailerhitches]

Check the ground.

[@pjimpin]

Is there not a constant positive wire in the back to save you from having to run a wire to the battery?

[@trailerhitches]

We are following the manufacture directions for installation. But if you have an unused 12v power source, you can definitely use that!

[@Chase-vr9fp]

Hardest part of this installation is finding the 10mm socket…..

[@trailerhitches]

Its always missing! haha