2021 Ford Bronco Forscan Disable Auto Stop Start GOAT Modes & Tire Size

Using Forscan to modify the new Ford Bronco. Disable Auto Stop Start with no errors ! Tire Size Speedo correction, Disable Double Honk and Adding Baja and Rock Crawl GOAT modes.
Bronco Vinyl Decals:
stickers-4u.myshopify.com/col...
#ad
New Style Forscan Adapter Required buy this one:
www.amazon.com/OBDLink-EX-FOR...
Bronco Google Sheet Forscan Mods:
docs.google.com/spreadsheets/...
Tire Size Change Relearn PCM/AWD for 4x4 and check engine codes
forscan.org/forum/viewtopic.p...
Forscan Software download:
sw.forscan.net/

[@GoJoeProductions]

HOLY MOLY YOU ARE A LIFE SAVER! I was getting the 4x4 and service soon errors and couldnt find anywhere on how to fix it. THANK YOU!

[@ezohnthedj1200]

That “2650” did the trick! I appreciate the information. The double honk, GOAT modes, and tire cal information was on point. Thank you!

[@patrick335i]

VERY HELPFUL... Thank you! :) We got stuck with those ERROR codes and you covered how to get rid of them. Perfect! Another vid mentioned to Start Engine, but next time will try with just using Ignition ON.....I guess I'm scared it will auto-turn off in the middle of programming - and that would likely brick the ECU.

[@radar3d479]

Thanks for the video

[@njseashorechas2698]

Wont the 're learn ' error messages eventually go away on their own? Great video. The most complete one yet I've seen! Thanks!

[@premiumoctane93]

I can not say on the messages going away on there own. I drove for a few miles and they did not but did after i did the relearn.

[@IMGONEIN60]

Thanks 👍🏾👍🏾

[@garymcintyre4485]

On the start stop I have a different number off hand it is one off from the video but it still worked

[@michaelbarbour5627]

What software did you download, his link has multiple choices

[@GoInfluenceyourself]

Is the “rock crawl” mode the one that allows “cruise control” under 20mph? I am looking for a better way to hold low speeds going down hill. If so would this work on a 2024 Bronco Sport Big Bend?

[@applebitefool]

When I try to reset the error codes, I keep getting an error: service procedure not supported-service procedure interrupted. Any ideas how to get around this?

[@marcus_ohreallyus]

When I did my auto start stop in forscan, I get a battery indicator light, which I assume is an electrical warning. Is that supposed to happen?

[@TGC1775]

Any updates on goat mode? 2023 outer banks, I want to add the extra modes.

[@marcosquartz]

what a cool video! do you think the maverick will be similar and just as easy to do?

[@premiumoctane93]

Yes the Maverick should be similar

[@FlashFilmAcademy]

Where is the info on clearing the codes?

[@jayspendley7359]

Do you have a video on how to make another GOAT mode the default? I have 35's with the 2.4 and I actually get better mileage in sport mode

[@premiumoctane93]

No sorry have not seen a setting that I will do that

[@OhhReallyNow]

I get wayyyy better mileage in sport mode as well with the 35s & 2.4l. Using the manual mode helps too.

[@ccostilla361]

Anyone able to get the auto start stop to work? It didn’t disable on mine. I remember when I did it on my raptor I had to go to bdy cm and hvac, but for some reason the one for the bronco shown on the google sheet didn’t work.

[@premiumoctane93]

The steps in my video worked for my bronco to disable auto start /stop. This is the only way I have seen to diable it.

[@AB1DE]

Hi! Thanks for the video. So the relearn works for the AWD (and clears the warning lights) but the PCM gets interrupted at 2%. I have the newest version, any idea what I could be doing wrong? Also, I tested the new tire size but now I’m 5mph slower!

[@premiumoctane93]

Not sure on the 2% interrupt. As for the tire size if you are using the same stock 17" wheel and 35" sasquatch tires then 2650 MM is the winner for me.

[@dylanlam6430]

I have same pcm issue

[@AB1DE]

@@dylanlam6430 I gave up, but got rid of double honk, at least!

[@dylanlam6430]

@@AB1DE I hate people like this video poster who tell people its so easy, and boom we get codes and they're like Lol sorry. So I'm guessing you went back to standard settings?

[@AB1DE]

@@dylanlam6430 I just returned the settings and returned the plug. The doofus party of 5 guy didn’t even talk about the ‘relearn’ step, this guy was much better. I tripped a check 4x4 code, and this video helped me clear that, at least.

[@justinlitton626]

What offset did you have on this build?

[@premiumoctane93]

No sure what the offset is. The wheels are stock Big bend 17” wheels with 35” Sasquatch tires.

[@gearjammer3200]

Microsoft calculators have converters (no need to google inches to mm)

[@premiumoctane93]

Very nice ! I didnt Know that but see that it has that option under "length"

[@gjl7022]

in PSCM, it is [023A] not [0038] in 730-03-01 for my 2023 base Bronco. Please advise.

[@JamesKing-fg3wn]

Same as me, any word yet?

[@brandonhoud42]

Anything?

[@abdulrahmanalawadhi859]

Is it safe to you use forscan to adjust tire size ?? I have outerbanks 2.7L v6 4 door non sasquatch I added 2inch lift RC And 315/70r17 Bfgoodrich 17×9 fuel wheel

[@premiumoctane93]

Yes this would be how you change tire size so your speedometer is not off with bigger tires. Mine was a big bend non Sasquatch.

[@abdulrahmanalawadhi859]

I change the tyre size .... and i did the AWD relearn and it works ... but when i run the PCM relearn it shows service procedure has been interrupted and i wand to clear the DTC P160A ... and idea's how to fix that ?

[@premiumoctane93]

@@abdulrahmanalawadhi859 sorry I don’t

[@dylanlam6430]

I have the same issue

[@user-ev6eh7mo1t]

Which version of Forscan do you use in the list on their site? The top one that says “Functions list” or the second one that says “IPC module”?

[@johnnybolton6524]

Were you able to change the running lights?

[@premiumoctane93]

No I have not changed the lights.

[@johnnybolton6524]

@@premiumoctane93 I will keep an eye out for that modification.

[@JamesKing-fg3wn]

FYI: Your OBD connector is not recommend any longer, wouldn’t let me access the first mod. Have to order another one now…

[@premiumoctane93]

Thanks for the info, I added a note in the video about checking my description for the updated Adapter that is needed. This is the currently supported adapter per Forsacan: www.amazon.com/OBDLink-EX-FORScan-OBD-Adapter/dp/B081VQVD3F/ref=sr_1_4?crid=1T0I3U0RIKW5Z&keywords=obdlink+ex&qid=1692360494&sprefix=obdlink+ex%252Caps%252C145&sr=8-4&ufe=app_do%253Aamzn1.fos.006c50ae-5d4c-4777-9bc0-4513d670b6bc&_encoding=UTF8&tag=premiumoctane-20&linkCode=ur2&linkId=ec89e2e0a5ae158d43d66d28ef50979f&camp=1789&creative=9325

[@St0rm08]

Goat modes won’t work for me says security key wrong

[@premiumoctane93]

Interesting, what year bronco ?

[@alexklein1461]

Same issue, 2023 bronco

[@St0rm08]

@@premiumoctane93 2021

[@akhilgeorge701]

Is it possible to add auto break hold function using forscan

[@justinlitton626]

Tire*

[@premiumoctane93]

The tires are the 35” Goodyear Territory M/T that come on the Sasquatch

[@mktheking221]

It looks like you need the extended license for this, don't you?

[@premiumoctane93]

You can do it with the temp license u just have to renew after 30 days

[@guydavison]

Just a heads up. Just because you add the G.O.A.T. modes doesn’t mean you’re changing anything for the off-road capabilities. For instance by adding rock crawling mode you would need Front stabilizer bar disconnect option for it to do anything. That’s why it is missing from certain models. They are just presets to certain options. Without the options you’re just changing what the display says.

[@premiumoctane93]

Good to know, I don’t plan to do any rock crawling so should not be a big deal

[@shin-ghon5446]

Not true, the black diamond comes factory with Rock Crawl mode and not sway bar disconnect.

[@JamesKing-fg3wn]

And it’s a good thing I do have the sway bar disconnect 😊, thanks for the extra goat modes