2021 HPI Savage X4.6 - First Start & CORRECT Break In Process - It's Better Than EVER.

Brand New 2021 HPI Savage Break-IN DONE RIGHT! Rebirth of a Legend!
➡️Get The New savage Here - amzn.to/35Jy678
HPI DEALER Website - HRP - www.hobbyrecreationproducts.com
HPI RACING - www.hpiracing.com
🛒Brand New Nitros To buy - bit.ly/3wA92Zs
➡ In Stock Nitros RTRs - bit.ly/3nxYQ0O
➡LOSI 8EIGHT 1/8 Nitro Buggy RTR - bit.ly/3GtIXyT
➡LOSI *EIGHT-T Truggy .28 RTR - bit.ly/3oFupGq
🛍AMAIN Hobbies - bit.ly/3qsgLaY
👍🏻 Support the channel by Becoming a Patreon Member and get featured
in the videos.Consider supporting the channel for awesome Perks: 👍🏻 / hybrid32494
🛍️ Ordering from Amazon? Use this Affiliate Link to support the channel: 🛍️
amzn.to/3c3ZI7H
🔥Glow Driver I use - amzn.to/39xgRnY
💥Silicone High Temp Hose for Exhaust Couplers - amzn.to/3i0MuuN
🔥Servos I use - amzn.to/3tCs1j2
🔥Flysky GT5 (6 Channel) radio I use - amzn.to/3bn3Y13
🔥Dynamite .28 Engine With Pullstart - amzn.to/3aThUzC
🔥Dynamite .19 for Traxxas Vehicles - amzn.to/3eKL3OF
🔥Dynamite BIG RED .28 (Most Powerful) - amzn.to/3eFjYwc

[@hybrid32494]

2021 HPI Savage Unboxing Video HERE - kzbin.info/www/bejne/lXO8iWiBopp2epI

[@zachattack2016]

i always use an engine heater and make sure it gets up to full temp, this helps the engine have better compression when its hot!

[@bassanonymous4923]

It's crazy how many people Overlook the break-in process. What I love is when someone gets a brand-new Nitro takes it straight home fills the tank and let it rip 100% full-throttle out the gate then after a month or so they're selling that same rig advertised as like new only ran a few times but needs a tune, asking damn near shelf price 😫😫. I got burnt like that so many times when I first got into the The Hobby to the point where it about ruent the Nitro side of the hobby for me so since then it's gave me a different outlook on like new used nitro's.

[@hybrid32494]

hey bro! how you doing! YUP, they always claim their used nitros have 2 runs, ahah!! That's prob because they killed the motor in those 2 runs and it won't start up anymore. Makes sense! Well you know on this channel, we do things right, even if it takes me a long time, and it's not as interesting as skate park bashing vids!! This is the right way to do it!! And this savage will never DIE!! lol! more on this soon bro! thanks again for being here..

[@Fabrizio7171]

Same you live and ypu learn. Ive bought fresh builds that have had problems as well .

[@voneboy]

The nicest way to present a break-in procedure on video that I"ve ever seen.Very well editing job Dmitryi!!

[@hybrid32494]

hey man! Thanks! Glad yo liked that EDITING! I tried to be very in-depth and accurate to make sure nobody accidentally kills the NEW Savage, lol! Cause you know some channels just open the box and run them, not how the NitroGang does things..

[@voneboy]

@@hybrid32494 Yeah they are sadly way too much noobs channels out there..lol No,of course I fully understand what you mean ..

[@DoRC]

If you want to get an accurate reading of what the engines temperature is you'll want to take the infrared gun and stick the actual sensor, not the laser because that's not the sensor, directly into the top pointing at the glow plug. You can sit the body of the infrared gun on top of the cooling head to get it as close as possible. I think you'll find that the engine is actually running quite a bit warmer than you think it is by looking at the fins on the side

[@ericniestedt304]

That is great to see that savage running. Definitely adding it to must have rc.

[@hybrid32494]

hey dude! how you doing! This is just the beginning, I am declaring this month "SAVAGE DECEMBER" that means, we gonna go CRAZY with savage videos and top speed runs!! All for the NitroGang! BTW these are in stock now, they finally came, a few people have already ordered them!!

[@manuelmaldonado6304]

AWESOME video! HPI are you listening?

[@hybrid32494]

The real Question is, does HPI SMELLLLLOWWW what the NItroGang is COOKING!!

[@youtubeviewer9523]

Bro, I was just working on my nitro. Fully rebuilt shocks are smooth as butter. Gotta love a good nitro!

[@hybrid32494]

hey bro! Glad to hear you're making your NITRO GREAT AGAIN!! Shocks r a priority for sure!! It'a all about that smoothness and suspension travel!!

[@youtubeviewer9523]

@@hybrid32494 Thanks bro, gotta get that suspension dialed to out bash the arrma's lol

[@christianwornall1047]

Hi mate I finally did it I sold my Traxxas mini e-revo vxl witch had a lot of money spent on it I did love it I got £325 for it put the money for the Savage x 4.6 yes I'm going back to nitro can't bring myself to sell my Traxxas rustler vxl because it is an absolute monster to much power 4.6 looks quick enough have a lovely Christmas 🌲🎄

[@hybrid32494]

Hey bro! how you doing! Glad to hear you're coming back to the NItroGang! But ye man, the mini e-revo VXL was a great platform, and good at everything, I used to have one too. Don't sell the rustler VXL, because then down the line you're going to find yourself trying to buy another one, lol ,trust me!! Savage 4.6 is a BEAST right! Even the old one is trully Sickening!!

[@Syphic001]

That new Savage is sure is nice. That body is growing on me ….Appreciate all you do for the nitro gang !

[@hybrid32494]

hey brother! Yes, the body GREW on me also. At first I wasn't sure, but it's honestly highly functional and a nice thick lean material, not flimsy like the last generation savage was. 2-SPEED Runs will be here soon!!!

[@AntiHero4.6]

LOVE YOUR VIDEOS! You’re my favorite RC KZbinr. I love your passion for nitros and Savages! There aren’t enough nitro lovers! Thank you for making Nitro great again! 😉

[@hybrid32494]

Thank you so much, that really means a lot to me. I know I have chosen the path less traveled in the entire RC hobby, which as you would know by now is the Nitro world. But it is worth it we love it and we will never stop burning Nitro, I still own this Savage, and it has almost never let me down.

[@skycorrigan6511]

Bro this needs to be released asap. It'll be my first rtr nitro

[@hybrid32494]

hey my dude! thanks for watching! I just got news that they are. IN STOCK! A few guys have already ordered them! Can't kill a nitro, they know how it is, lol! Anyways more on this thing soon, we will test it to it's TOP SPEED limits!!

[@jeschreindl]

Great video man. That’s going to be a killer truck for you 👍🏻

[@layback209fixorsmash3]

Another great vid. Nothing like breaking in a new nitro. I cannot wait to be able to purchase these, clutch set ups, tires, 17mm hex enhancements for my Savage fleet!!! The old dirt bonez hpi tires we epic and so will these. All their stock stuff is very good.

[@hybrid32494]

hey my dude! Thanks for watching! I love the break-ins too! That is where you get to learn alot about the truck and get comfortable with the starting and tuning procedures! The clutch setup and clear HD fuel lines are 100% highly recommended btw.

[@nicksantitoro]

Even though I didn’t buy an HPI, your overview of the recommended break in process was very helpful for a beginner like me. I have heard of people heating the head during break in which doesn’t seem like it’s recommended by HPI, or by Traxxas. I will follow the method shown in this video. Thanks again.

[@hybrid32494]

Hey bro! I'm glad you found my explanation of the basic BREAK-IN conditions and requirements useful. Everybody seems to claim they know best and it gets quite confusing. What really matters are the amount of heat cycles you do. On average I do about 8 to 10 heat cycles which takes about 4 to 5 tanks of fuel, as recommended by HPI..Any questions always feel free to ask, this is what I'm here for bro!!

[@slottygw2wvw842]

FYI when taking temps always inside the glowplug hole cavity not on sides they can vary too much :) 2 speed baby!

[@hybrid32494]

hey bro! YES! you're 100% right! I actually did that a few times, didn't show it in the video due to poor clarity. But it was basically also about 150. BTW the cooling head on this thing is enormous, wasn't that easy, lol. thanks for watching bro..

[@RCWright]

Awesome love the new Savage! Got to unbox mine 😀

[@Driver0378]

Nice to see she’s back! I like the new body, but the mirrors would be the first to go bye bye. Lol! The bumpers and the hex hardware are a nice touch too. I’m still rocking my SS K4.6 kit with numerous upgrades including the 3speed! The first was the roto start. That’s one thing they should do from the factory. Damn pull starts. Lol! Long live the Savage!

[@Crack3drc]

Awesome video! Not disappointed!

[@jonathanrigley981]

Been waiting for this video! Wish I could afford to add a new Savage to my collection, that price is scary!

[@hybrid32494]

hey man, thanks for watching and your support on this channel!! It's for sure not the cheapest nitro there is, but really no other competition for this style of truck, less than 2 other trucks in this sort of segment, you know. Anyways, more on this thing soon!.

[@rcshowoff5427]

Great run down on the Instruction book break in process. The new style body I think is nice. For me the only down fall is it doesn't come with the Roto Start especially with the higher price tag. Great video! See ya on the next live stream.

[@hybrid32494]

hey bro! How you doing! Yes! I'm glad you liked the HPI manual info, nothing like reading a nitro manual lol. Brings me back!! To be honest with you the pull-start is super easy and I'm kinda INTO it. Never gotta worry about forget the ROTO-start or a dead battery ,you know.

[@michaelwhitham4501]

Great channel matey,now subbed.had loads of hpi cars back in the early 2ks and decided to pick up a cheap savage x rtr to fix up and get back into some nitro Rc bashing. Do you think these bumpers will fit on the older savages ? All hail the nitro 😁

[@chrisryder4709]

They say my Savage is on the way , tracking isn't showing it though , CRRRRRAAP !! Can't wait ! Great info ! Thanx !

[@hybrid32494]

oh hell yes bro!! Yes, the new Savage is IN STOCK NOW! I already know a couple guys who ordered one!! Sickening!!! But yes, the tracking from HRP usually does that, but their shipping is FAST, no need to worry! It's on the way my dude! NItrogang!

[@paultumey2212]

Always loved your videos bro! Gives me so much hype to keep going nitro forever! Hope you do also!

[@nitrogang4416]

thank you bro! NitroGang!..

[@joshchatwin8569]

Yes yes yes been waiting for this

[@cheyennemoodispaugh5174]

I love the look of that truck brother keeper pinnnnnnnnnnnned!!!!! Braaaaaaaaaaaaaaap!!!

[@hybrid32494]

hey bro! thanks for checking this video out! I'm declaring this month "SAVAGE DECEMBER". Lets all do SAVAGE stuff and burning nitro!! More n this truck soon!! thanks bro..

[@johngoodwin4353]

Another great video! Doing it for the Nitro Gang!

[@rcyalater...2305]

Next level nitrogang video bro! Insanely Sickening

[@hybrid32494]

hey bro! What going on!! Happy to see you here! Yes, I made sure to put out some great info on a PROPER break in for this truck! We gotta make sure people don't prematurely try to KILL them, lol. you know!.

[@rcyalater...2305]

@@hybrid32494 Wait....! What?! So you're not supposed to just open the box, fill 'er up and let 'er rip fill throttle like some who we won't mention KZbinrs? 🙄🤣😂 Keep up the content bro I think you've successfully made nitro great again.... Time to make it greatER!!!

[@DoRC]

You can set the multifunction knob to be throttled trim on the Traxxas radio.

[@mraudio8042]

OMG that is so Cool !

[@birdman316]

koool my brother!! nothing like a bigblock savvy woooo!! everyone needs to remember....hpi savage=GREATNESS

[@jdpasl]

Nitro God is doing a good job!

[@hybrid32494]

whats up bro! Good timing for a PROPER NitorGang Savage break in video today, you know why? Cause the new savage is in stock right now!! Trully sickening! Next video the break in will be complete and I will run it HARD!

[@jacobhamilton6632]

I just ordered mine on the 19th...i wonder if they are actually available yet

[@bradleyskilling9824]

Sweet video. I subscribed. Waiting for mine to ship. Ordered mine as soon as Allen told me about it :-)

[@jjrcs8357]

Well hybrid another great informative video. I'm so glad HPI is back with a new nitro savage. Hey my 8 year old son will be joining the nitro gang this Christmas. Do you have any nitrogang shirts in kid sizes?

[@hybrid32494]

Hey bro! how you doing! Glad you appreciated this video, I tried my best to ensure people have the RIGHT information on these, and dont try to kill them! Unfortunately right now KZbin is once again trying to kill my shirt designs, I'm fighting them again. There is a link here under the video, but SMALL is the smallest you could get.

[@kennybowers7607]

Can't wait to find one in stock.

[@hybrid32494]

hey my dude! They are in stock right now! Plenty of guys have already ordered them!! Gonna run this one again later today! Love it! Thanks from wathing!!

[@furocity]

The pull start now 👍🏼

[@hybrid32494]

hey buddy! The pull start is fine, I've run a good amount of fuel through this truck so far, and it's not let me down yet.

[@nitrogang4416]

The NItroGang is here!! You cannot kill an HPI Savage!!

[@karuuu]

Such a sick looking truck. I’ve had a short break for a bit while I focus on work and family but I’m seriously considering one of these as a Christmas present to myself. What you think?

[@hybrid32494]

hey bro! How you doing!! Welcome back to the NitroGang, you might have taken a break, but the NITRO never forgot about you! LOL. Anyway, I gotta say, this truck is dope! Pricey, but really no competition to this type of design that is worth getting. PErforamce wise though it's similar to the old model, only some important tweaks.. Some guys have already ordered them from what I hear.

[@rcbrooks3543]

I told Santa that's all I want. Lol brap brap!!

[@sakisSAVAGER]

Great!!!!

[@Hemihart]

Why is the rear body mount so high? They made the body shell sit WAY higher than the rear bumper. So there another mount to make the body more level with the front? Anyway, I've been looking forward to this video, thanks for the great content, Hybrid!

[@hybrid32494]

hey bro! Good observation there. Turns out I did not raise the front body mount when recording this video, I have since raised it ONE notch, but there are 2 more position left to raise if needed. Since I installed the HEAD protector it came with a different rear body post, so that explains it. NItroGang! Thanks for watching dude, more on this truck soon.

[@transgenderadeptasororitas1594]

Bit of interesting info, the wright brothers relied on a pair of two horsepower engines for their earliest prototypes, fun thought as you use three horsepower to run an rc monstertruck

[@tyranducksworth1913]

I think I’m have to pull out the vintage savage this weekend

[@hybrid32494]

that makes me happy to hear!! I'm officially declaring it "SAVAGE DECEMBER". that means lots of Savage videos and running RICH & LOUD with a twin vertical plate chassis beast!! Trully Sickening!!

[@LawrenceTimme]

Nitrogang!!! 💪💪💪

[@sirfelthimself6557]

I'm breaking in the LRP .28 in my savage 25 ss and it feels like 1 tank runs forever

[@hybrid32494]

hey bro! May the NitroGang spirit of the BREAK IN be with you! lol.. And yes, the single tank of fuel will take forever bro, you already know! BTW I normally do 1/2 to 1/3 tank per heat cycle.

[@bubblesrcshed]

That was awesome I can’t wait to see you rip that thing man 👍

[@hybrid32494]

thanks my dude! Gonna be some SICKING 2-speed BABY runs soon! Im finishing up the break in this week, then it will be ready!!

[@bubblesrcshed]

@@hybrid32494 I’m pumped up too see the smack down once it’s broken in 👍

[@fcbaker65]

I gave you a thumbs up because they kick you out for being too rich & loud!..🤣😂👍

[@hybrid32494]

hehe, hey bro! What about the DOO-DOO (poop) on my shoe? I wound up throwing those shoes out after this video, they were quite worn anyway! But ye, they cannot handle the Sickening Sound of the NITRO! Only the NitroGang is built to handle that excitement..

[@johngantner9314]

hey ya didnt have to burn the latest Rc car action magazine. it had a nitro slash in it. Lol

[@hybrid32494]

YES BRO!! you're 100% right! Finally an issue of the mag I can keep on and be angry over. LOL. Plus I like their choice, the nitro slash, actually a good nitro for anybody to get.

[@cheyennemoodispaugh5174]

Those tires seem like they will hook up on the track or hard pack clay

[@ghostly07]

Im considering to get the same engine for my mp7.5 the gxr28 is toast, is it okay if I lets say run 1st and 2nd tank out, and go fill up my batteries or whatever and run the 3rd and 4th tank the other day?

[@johncardwell3119]

Great video I've always wanted a nitro savage will the new model you have handed the r36 force engine will I need any upgrades apart from the gearing and pipe can't wait for your next videos

[@johncardwell3119]

I meant handle the r36 force engine thanks

[@hybrid32494]

hey bro! Thanks for watching, and great question! So the Force R36 is the same displacement as the HPI K5.9 engine, used in the XL models. I dont see why you would have any problems. It all comes down to how hard you bash it, and how heavy your throttle finger is, lol. . The stock pipe is fine, if you want a metal one, it's totally possible, but this one is already a duel chamber tuned pipe. The fact that it's a composite material is meaningless really. More vids on this soon bro!! NitroGang!

[@toddbertram6556]

Whoever designed that body must be a huge fan of mine-craft.

[@Nerm78]

Great video! Sorry you had to step in doodles for us!

[@pistonpoweredrc2092]

Heck yeah man that’s sickeningLee cool 😎

[@hybrid32494]

hey bro! Thanks man! Glad you found it SICKENINGY COOL!! Just like I did, ahah!

[@feedle2003]

Savage baby

[@hybrid32494]

hey my dude! YES! you said it! Totally Savage! Going to be doing more sickening final break in vids and then speed runs and bashing this thing soon!! thanks for being a sub and watching!

[@nomusicrc]

FINALLY you're breaking this in I can't wait for you to run the Kyosho Foxx I love the body So... I guess I won't be getting the WLTOYS for Christmas I guess I will stop asking

[@hybrid32494]

hey man! I promise I will send you the WL TOYS you want! It will be your gift! I will fix it up this week for you, should be in good working order when you get it! Also going to go back to work on the Kyosho FOXX soon! Right now it's "SAVAGE DECEMBER" so that means lots of Savage Vids, lol!! Same return shipping as the engine box yes??

[@mojarnugget]

Hello! When the spark plug dies out, which one would you recommend for this engine? R5? Thanks!

[@hybrid32494]

hey bro! yes the R5 is fine, but check out the A8 plug, it's cheaper and still a good short body medium heat range plug. I've run even the traxxas plugs in many other nitros, all similar.

[@JohnSolimanMBA]

I have the outgoing savage 4.6 and was wondering if the parts from the new one would fit on the old one. Also would the new body and bumpers fit on the old truck?

[@hybrid32494]

hey man, I can 100% confirm that the bodies are fully interchangeable yes. Most of the parts are also identical, Actually I would say just about all of them, it's literally almost the same truck with only a few various updates.

[@AdrianMateoDrones]

Hey man I’ve been looking everywhere for one of these and also the nitro kyosho 3 speed and i cannot find them anywhere. Can u help me out buddy? Big time follower and supporter hete

[@hybrid32494]

hey bro! How you doing! I just checked and these new savages are in stock right now! You could get them from HRP (link in the video description). Looks like the USA-1 in sold out right now. Id say give it a few weeks and the kyosho will be back, in the meantime there are still tons of nice traxxas to get if that's what you want. I love all nitros, you know, lol..

[@cyclonerc1625]

Whats up ntro gang. rich n load. 3 speed coming at ya. Do you smell what the Savage X cooking. great

[@pistonpoweredrc2092]

I want to be the first one in Texas to own one

[@2259alfie]

Nice kit is there a 3 speed kit for it ?

[@hybrid32494]

hey my dude! thanks for checking out this video. There are 3-speed transmission for older style savage 4.6 models. I can almost guarantee you they will fit this model savage as well. If you want more speed I recommend you install a taller clutch bell, that will be the easiest and fastest way to get some more speed for you my dude. NitroGang!.

[@wayneburriss7385]

I want a hpi trophy or a savage

[@thercguy2428]

Oh and merry christmas to all nitro gang members

[@hybrid32494]

thanks brother! Merry Xmass to you from the entire NitroGang family! and your own facility ofcourse. I burned a few tanks of nitro in this savage today, MERRY XMASS for real!! ahah

[@majesticyt5895]

nice car👍😎😁

[@2259alfie]

Yo you inspire me to buy a HPI Savage X4.6 nitro. I found one on the web in pristine condition no scratches with some Alloy parts too the person installed the 3 speed transmission in it and a LRP .28 nitro engine Upgraded the radio ran a tank and shelfed it He is asking $300.00 or best offer also has the box and instruction book SICKING 😆 F-the electrics

[@cortmeinhardt4463]

Mine will be here saturday baaaaaabbbbbby

[@hybrid32494]

oh he'll yes!!! Major congrats bro! Yes these are in stock now! So far a few people have told me they have ordered one, Trully sickening!!!

[@gabesilva4481]

are a lot of the parts for this new savage compatible with the older 109083 savage x 4.6?

[@hybrid32494]

hey my dude! Yes, most of the parts are identical. This new generation body is also a direct fit onto the older savage X 4.6 models.

[@gabesilva4481]

@@hybrid32494 sweet! I guess I know where my next paycheck is going then... thanks!

[@Bang_n_slang]

15% is usually recommended with special break in fuel. Comes with more additives and oils for proper lubrication break in. How do you compare it to the kyosho 3 speed ?

[@hybrid32494]

hey bro! thanks for checking out the most SICKENING new truck of 2021 bro! Anyway, about the break in, did you see all that EXCESS oil I had at the end coming from the pipe?? that was tons of oil, I really dont think you need more oil than that for a normal break in period on a engine of this sort. Anyway, what matters is not overheating and doing a good amount of heat cycles, these basics apply to all nitro motors. I'll be comparing it to the USA-1 soon. Right now it's all about the savage!!!

[@rccrazymike]

👍

[@hybrid32494]

Whats up bro! How you doing!! I am making this month (December ), the MONTH OF SAVAGE!!!

[@Rckid28]

What do you mean Traxxas doesn’t have a throttle trim, they have a multi function knob does the same thing…

[@js64984]

I love the Savage but why does the body sit so badly on the nitro models?

[@hybrid32494]

hey buddy! How you doing! Thanks for watching! I have since adjusted the way the body sits a little bit. This truck has adjustable body posts so you can somewhat control that. In this video it was just positioned in that way, also I installed the rear roll cage - Head protector so that caused a slight adjustment to the rear of the body position too.

[@mattster197]

Its a lot of plastic bro. Plastic shocks, on something that big? they call it Nylon to try an church it up. Do you smell what I am cooking? Smells like plastic. When its cooler like now you should wrap the head in tin foil or a rag to allow it to heat up to the correct cycle temp. You want to get over 200.

[@nighthawkj30A4]

Does this have reverse gear?

[@hybrid32494]

Hello buddy. This model does not have reverse. The only rtr nitro truck you could buy today with reverse is a traxxas revo.

[@nighthawkj30A4]

@@hybrid32494 and Tmaxx classic along with Tmaxx 3.3 but you have to install it.

[@leeswannick5833]

Looks like a 3 speed

[@hybrid32494]

hey my dude! This is for sure a 2-speed model! Trust me, lol. I would love a 3-speed though! The more speeds the better, you know how it is! haha! thanks for watching bro, more o this truck soon.

[@benleejaison1437]

They is so much oil coming out of the exhaust

[@brianwright2008]

Ya know brothers its all about saying your prayers and smelling the nitro and whatcha gonna do when the Nitro World Order runs wild on YOU!!

[@hybrid32494]

Yes bro! For sure know all about smelling the nitro, but where do we get the special Hulk Hogan vitamins, lol I guess we will have to settle for some 30% Nitro and that’s OK with me. Thanks for checking out this video bro.

[@brianwright2008]

@@hybrid32494 yeah man I enjoy all your videos and just bought this truck. I run 30% in everything. Keep up the good work!

[@gbaker7952]

Bro you going to drive the thing Wtf is with theses people just talking and not driving every video I watch on the hpi

[@hybrid32494]

hey dude, I have a good amount of running videos on this savage on this channel. Please take a look at the playlist. You will see some real speed runs and jumps.

[@almighty151986]

So they sorted out everything except the fuel tank......sigh.

[@ratherbeflying101]

Too much money for the same truck, no real changes. Ive already got 4 3.5s , 4 4.6s, 4 5.9s, 2 SS 's trucks why spend for more of the same thing?

[@GavinY]

if only I was paid in usd

[@markluttrell8908]

Hey I know you don't give away rc's .I'm 48 disabled and Not a lot of money would you sell me one of your cheaper ones?

[@audia4addict950]

760 euros omg too expensive

[@stefandwoodham]

It's disappointing after all this time and they couldn't really put some effort in upgrading the truck?!

[@narongrachmareongsit1978]

❤🎉😮😊. ไฟไฟไฟแอดพ์. ไฟไฟไฟแอดพ์. ไฟไฟไฟแอดพ์.