2021 Silverado Leveled on 33’s & 20x10s - Zero rub!

[@lennynieves7442]

Your truck is gorgeous, I just bought a 2022, and I want to go with 33's. I am glad I was able to see your videos.

[@DownInTX_CJ]

Thanks man. Your gonna love the truck. I’m happy with it and will be doing a 3.5” lift, have parts just not the time.

[@lennynieves7442]

I have seen several different ways to install the 2 inch kit, a couple show only loosing the sway bar and then installing the kit, with the tire off, unless you have a 2 wheel drive. My truck has the 2.7 turbo, which is surprisingly very good. I'll let you know once I do the leveling kit install, which way I had to go for installation. I am also going to eliminate the muffler and go with an aftermarket straight pipe, which I've seen a few vehicles on KZbin, and it sounds deep. I am going with 33's on 20 inch rims, since they will work with just the lift kit.

[@kennycase8881]

Best description on clearance and what you had to do that I could find thanks buddy truck looks awesome I have a 24 rst 👍👍

[@DownInTX_CJ]

Awesome boss, thanks. I’ll be posting another video soon, upgraded to a 2500! Stay tuned!

[@lennynieves7442]

I went with 285/50/20, neg 18 offset. No leveling kit, no lift, I have no rubbing on hard turns, and no trimming. I want to get a little bit more aggressive stance, so I have 1 1/4 wheel spacers going on next.

[@jeremysylvia3237]

Nice truck man, I love the RST and TB models! I have a 2021 Ram Night 4×4 with almost the same stance. The only difference is my wheels are 20×10 wrapped in a 285 60r20 Cooper Discoverer AT3 tire with a -18 offset! Happy Building!🤙

[@DownInTX_CJ]

Thanks man. That sounds like a nice looking truck as well. I kinda wanted a ram but always be a Chevy guy. Lol

[@MikaelW254]

That baby looks sooo beautiful! Good job!

[@DownInTX_CJ]

Appreciate it! Check out the new one!

[@gk9417]

Nice truck 👍 I just ordered 295/50/22 Toyo at3 ( 33.6 inch diameter 11.6 wide ) hopefully they will fit my stock 21 Denali I guess I’ll have to do some trimming now Thanks ✌️✌️🇨🇦🇨🇦

[@JoeDawson.]

Hoping my work truck came with the same height. Taking tires off my dads wrangler and slapping them on my rig

[@motman6668]

Great looking truck and sits well with the mods! Thanks for the video. Helps me understand how I want to mod my 2022 RST!

[@DownInTX_CJ]

Preciate it man.!

[@craigmac1516]

I just picked up a 2019 satin steel 1500 lt and i want to go with that same size wheel and tire. looks great . cool vid thanks for sharing and awesome Silverado ...

[@cadethompson8708]

Me too I just bought a 19 satin steel LT! Lmk what your setup is looking like

[@nivlocnevets]

Looks nice! I have the same truck in the dark blueish grey, and with the black 22's. I like the look but hate the ride and want to do a bit of off-road. Thinking about doing something similar, create a Trail Boss of sorts. How did the lift affect the ride? Is it a lift or level? Would you recommend doing shocks also? Thanks for the video

[@kingfisherfishing3255]

Beautiful truck!!! That’s the look that I’m going for with mine.

[@DownInTX_CJ]

Thanks man, still adding some stuff going to do another video soon!

[@caidinfranklin7324]

Man I’m sitting here watching the video and I’m thinking man that place looks familiar and then it hits me! That where I graduated high school lol

[@dcherryz28]

Nice lookiing, wheel & tires. I have the same color 2021 1500 Z71 RST. Getting leveled soon

[@DownInTX_CJ]

Nice man. Sounds good. Quick question have you noticed a noise at shut off? Like a air vacuum poof sound when you shut off?

[@dcherryz28]

I haven’t noticed any strange sounds, as of yet. I have the air conditioner and music cranked all the time , though. Lol

[@DownInTX_CJ]

@@dcherryz28 give it a shot next time and turn it off and see if you hear anything like that hard to explain, I’ll try and make a video next time lol

[@dcherryz28]

No doubt, I will be checking for it

[@RobertJohnson301464]

I do as well

[@kylebelcina]

Thank you. This is the perfect fitment for me

[@DownInTX_CJ]

Nice man glad I could give some good feedback

[@606pewgram]

Man I just bought this exact truck. I love that setup and want to do the same exact Wheel and tire size. Is it still the same setup? Would love to see an update

[@kristoferalex08]

What is the high difference between a regular Texas edition and your RST.? If I install just 2 inch leveling kit could looks like yours? Man I really love those tires !!

[@lilsadboy69]

305 55 r 20 fit perfect

[@RoadKing-269]

My man, that is one sweet looking truck.

[@DownInTX_CJ]

Appreciate it my dude!

[@wreybinrios5098]

Got the same truck, but white

[@vichdz8808]

Looks good bro. Just bought myself a 22 RST and I want to level it out as well.

[@DownInTX_CJ]

Nice bro. I’m about to put a 3.5 rough country on it. Will be making another video soon!

[@Justintonini]

I have the same truck with the 6.2 I’m thinking about going with 4” lift

[@DownInTX_CJ]

Nice yeah still debating if I want to go a little bigger or not but this is my commute truck and don’t know if I want to do all that haha

[@Turtle665]

Nice brother thanks for posting I’m looking to do the same thing to my 2021 Chevy Silverado 2.7 four-cylinder turbo charge. Question though what was your gas mileage before and after you leveled and put those tires on?

[@DownInTX_CJ]

Thanks man. And nice, great truck I love it. It’s my commute daily for work. Luckily I only do 8 miles round trip but have taken to beach and that’s about 300 miles and got great mileage still didn’t even notice a difference. Also my trim level the AFM/DFM comes deactivated already so that good gas mileage was always from v8

[@Jordan-md3uc]

any issues with your control arms, joints or anything after you levelled it? I heard the RSTs aren't able to handle them. As far as dealers won't even install them... I want an RST to save a little money, but need it levelled.

[@DownInTX_CJ]

No issues had for 2 years. Just was a level and anything over 2” lift then it’s recommended to change uppers and joints.

[@kcsparrow616]

Looks great! I have a 2020 RST. I’ve been thinking about doing a 2” level on mine. I worries the front end will look higher than the back after it’s done. Do you notice this on yours? Thanks

[@DownInTX_CJ]

No it sits pretty good. Leveled and looks great

[@kcsparrow616]

If ya don’t mind me asking what was the total price?

[@kcsparrow616]

Also, is it minimal difference as far as look? Does it make the truck noticeable different in height?

[@DownInTX_CJ]

@@kcsparrow616 price of what? Lift wheels and tires?

[@kcsparrow616]

@@DownInTX_CJ leveling kit. Mine seems to be about 1 1/2 differ between front and back. Was that about what yours was? Thanks

[@emankayspoppa9070]

Did you notice any change in ride quality with the 2" leveling kit?

[@DownInTX_CJ]

Actually got better and I personally think was smoother man. RC is a good brand on more reasonable side cost wise. Very happy with their products everything else I have added is RC just ordered the 3.5 lift kit from them cause I actually want to be a little more higher.

[@emankayspoppa9070]

@@DownInTX_CJ awesome! Thanks for the response. Did you go with the struts or leveling spacer for the 2 inch leveling?

[@DownInTX_CJ]

@@emankayspoppa9070 I got the leveling spacer, the install was super easy with those, heard the struts can give you more labor lol and more components you got to loosen and take off so the spacer was good enough for me. Is recommended to get them re torqued about 500-1000 miles after install then you should be good for as long as you keep the truck. I installed at 420 miles I’m at 2100 now and running great!

[@emankayspoppa9070]

@@DownInTX_CJ your truck looks great bro. Thanks again.

[@DownInTX_CJ]

@@emankayspoppa9070 thanks man. I’m gonna post another one hear soon, added RC bed adding some rock lights in the wheel well and thinking of swapping out wheels.

[@gv8888]

Nice truck! How tall does it stand? From the ground to the highest point. Does it fit in a garage?

[@DownInTX_CJ]

I didn’t get to measure it. But I was able to fit in my garage to park it no problem. I sold the truck and no longer have. But it will fit guarantee it 😊

[@jaysway007]

Good to know....thanks for posting

[@cfus8987]

Very nice truck!

[@DownInTX_CJ]

Thanks man I appreciate it

[@ericsantiago9187]

Looks super clean. Any difference on gas mileage?

[@DownInTX_CJ]

Thank you man. Not that I know of. Seems to be the same to me. But also I don’t travel far for work.

[@cadethompson8708]

Now that it’s been a couple months, have u noticed any difference in gas mileage ?

[@Jzn693]

You get any rubbing on the upper control arm?

[@DownInTX_CJ]

No sir not at all.

[@fletcherwright7042]

Sweet 👍

[@juanlpz5189]

You think with a -18 offset you wouldn't have to trim anything?

[@DownInTX_CJ]

Possibly. Not much but you may have to, do you have a level kit?

[@Ibarra941]

Can’t find those side steps any help ?

[@DownInTX_CJ]

They actually discontinued the ones I have in the video, they changed over to the ones I attached link below for you! www.roughcountry.com/product/gm-cab-length-hd2-steps-srb01900

[@carsonstevens4621]

Are they significantly louder driving down the road then the stock?

[@DownInTX_CJ]

Sorry I was away for a bit. Not loud at all we’re actually very quiet. I loved the truck. Yes loved, but no longer have it, upgraded to a 4x4

[@JoseTorres-nm3vi]

Did you have to put a spacer on front wheels?

[@DownInTX_CJ]

No sir! No spacer needed. They are actually not that safe and you are risking them snapping off when you used them with a lift and/or leveling kit!

[@em625111]

How much you spend in total ?

[@DownInTX_CJ]

Wheels tires and lift. About $3500. side steps about $350

[@Turtle665]

Did that truck come with 20 inch tires stock?

[@DownInTX_CJ]

Yes they did

[@kevinswanson3910]

You got 35,s not 33 stalk is 33 ,275,big tires you got there I got the 3.0 in my rst 2021

[@kcsparrow616]

Nope he has just under 33”.

[@randallstucky9013]

Make more videos

[@DownInTX_CJ]

I will be soon man trying to get better with editing and what not. New mods and videos coming soon

[@pipedesigner]

Have you installed the 3.5 lift?

[@DownInTX_CJ]

Not yet man waiting for some parts they sent me wrong stuff and been waiting

[@KrookTheLok]

We need the video with the 3.5

[@billymartinez3293]

What is the offset on those wheels?

[@DownInTX_CJ]

-24 boss !