2022 Honda CB650R - Oil and Filter change

  Рет қаралды 9,765

BMC MOTO UK

BMC MOTO UK

Күн бұрын

Пікірлер: 60
@stevietrucker4631
@stevietrucker4631 4 ай бұрын
I got charged £180 for a service at my local Honda dealership, next year I'll definitely do it myself. Cheers for showing us how simple it is to do.
@BMCMOTOUK
@BMCMOTOUK 4 ай бұрын
The dealerships can be expensive and have overheads to cover hence the higher prices but if your confident in doing your own servicing and maintenance then you'll save yourself an absolute fortune. I still had my bike serviced at the dealership whilst still under warranty but I also serviced the bike myself in-between the dealer services. Its a nice easy job on the CB650R and very satisfying doing it yourself! Thanks for watching and I'm glad it helped you out!
@recreativesigns4571
@recreativesigns4571 Жыл бұрын
Nice to see you back making content Sean. I hope you and Willy had a great adventure on your bikes and seeing Dave at his home in Austria. I’m sure as the weather improves into summer you’ll get plenty of footage out and about.
@BMCMOTOUK
@BMCMOTOUK Жыл бұрын
Cheers buddy, the adventure was awesome apart from the rain in Italy lol. It was great to spend a few days at Daves house in Austria as he's an absolute gem of a guy. I've used the bike every single day in May, the poor mini is feeling neglected lol
@ridewithimran1
@ridewithimran1 Жыл бұрын
After watching your video I am hoping to do my second service myself so good to see you showed everything in so much detail well done bro
@BMCMOTOUK
@BMCMOTOUK Жыл бұрын
Thanks Imran. Go for it buddy, doing an oil service is really easy and you'll save yourself a fortune!
@biker_dan
@biker_dan Жыл бұрын
Nice job well done. I went for K&N as it has the 17mm nut on the end. I agree hand tight too, nowt worse than a fully stuck filter.. I have been looking at making a wee oil burner for the pergola in winter, I will make one at some point.
@BMCMOTOUK
@BMCMOTOUK Жыл бұрын
Cheers Dan, yes hand tight is all that's required as there's nothing worse than trying to get a filter off that's been wound up too tight. Great idea with the oil burner, you'll need to make a couple of vids on that
@RodMatheson
@RodMatheson Жыл бұрын
Excellent step by step as always 👍
@BMCMOTOUK
@BMCMOTOUK Жыл бұрын
Cheers Rod, I think I need a hydraulic table lift. I'm getting too old for working on the floor lol
@SOLOMOTOUK
@SOLOMOTOUK Жыл бұрын
Good job done Sean 👍
@BMCMOTOUK
@BMCMOTOUK Жыл бұрын
Cheers Derek 👍
@rickyberkeley4362
@rickyberkeley4362 Жыл бұрын
I thought the second service was due at 8k miles? Did I miss something? Great vids by the way. Good job with the CB650R content. 👍🏾
@BMCMOTOUK
@BMCMOTOUK Жыл бұрын
Hi Ricky, Yes, you are absolutely correct about the service interval mileage. However, I had just added 4000 miles onto the bike in 3 weeks, so that warranted a service in my book. The oil is the blood of your engine, and by keeping that clean, you will prolong the life of your engine. Thanks for watching! All the best. Sean
@rickyberkeley4362
@rickyberkeley4362 Жыл бұрын
@BMC MOTO UK ah! Ok yeah fair enough, always good to give it a once over after a long journey. Interested to know if you got many more vids planned.
@BMCMOTOUK
@BMCMOTOUK Жыл бұрын
@Ricky Berkeley thanks Ricky, check out my Euro 23 playlist as there's 1 video out already on my trip with another 9 to follow
@drm3875
@drm3875 Жыл бұрын
I have this bike and sometimes i get crazy because the measures it is not correctly, and you have to check again and again.
@BMCMOTOUK
@BMCMOTOUK Жыл бұрын
I know what you mean, I have had that problem with cars too. Its always worth double checking the level then check once again after a ride for complete peace of mind!
@sandy-by1gk
@sandy-by1gk Жыл бұрын
Another top video Sean. Do you still have the mini? Hope your trip went well
@BMCMOTOUK
@BMCMOTOUK Жыл бұрын
Cheers buddy, I had an amazing time thanks! Yes still got the mini, it was basking in the sunshine so I could get the bike in the garage plus it gave me a chance to give the garage a good clean lol
@VASILLEVSKI1878
@VASILLEVSKI1878 8 күн бұрын
Hi, If I only use a rear-stand, will I still be able to drain all the oil or do I need a front one too?
@BMCMOTOUK
@BMCMOTOUK 8 күн бұрын
Hi there, you can easily change the oil by using the side stand. Just remember to have the bike level (sitting straight up) when checking your oil level
@stephen271
@stephen271 Жыл бұрын
Nice video mate 👍😊
@BMCMOTOUK
@BMCMOTOUK Жыл бұрын
Cheers buddy 👍
@aidangallacher9049
@aidangallacher9049 10 ай бұрын
Absolutely spot on mate! Subscribed, new to road bikes so this helped me massively! Recently purchased rear paddock stand and has the swingarm rubber L bracket's...got the hook attachments too and was wondering are the bobbins any better than the swingarm L brackets? Like any advantage? Also going to use your link for the front paddock stand...will this do for a Honda cb650r 2019? Cheers mate, Aidan
@BMCMOTOUK
@BMCMOTOUK 10 ай бұрын
Hi buddy and thanks for subscribing to my channel. I hope the videos will be if some use to you. Re the front Paddock stand, thus will do the 2019 model too plus you get an assortment of pins for the stand. My reasons for opting for that type of front stand was if I needed to remove the forks. That way the bike will still be supported. The L shape stand I bought was mainly so I could work on almost any bike as some bikes don't have the bobbins. I have a Suzuki Bandit as well as the Honda and these stands fit both bikes however, I need to change the pin for the Bandit as the hole in the bottom yoke is larger. An abba skylift is on my wish list but before I invest in that I need to sort the garage out as I've literally no room in there to work on bikes properly
@aidangallacher9049
@aidangallacher9049 7 ай бұрын
Hi mate, got the paddock stands you recommended and they work a dream, makes life so much easier. I plan to change the oil and filter for my 2019 cb650r...the filter looks so tight to get to and was looking at the tool you used...do you think this tool would fit my 2019 filter? Or even if I go for a tool that fits the 2019 filter will do the job? Like I say it just looks really tight but my filter does have the edges on it for a filter socket to fit so assuming it should do the job? Cheers mate, Aidan
@BMCMOTOUK
@BMCMOTOUK 7 ай бұрын
Hi Aiden, the tool will fit the filter no problem. It shouldn't be tight to remove and remember not to over tighten it on refitting the new filter. I usually just make them hand tight with a tiny nip just for good measure
@aidangallacher9049
@aidangallacher9049 7 ай бұрын
@@BMCMOTOUK cheers for speedy reply mate, I'll order this for the bike and get to it...keep your videos up mate you know what your doing, new sprocket and chain fitting video be good next or even just a degrease and lube. I'll be sure just to hand tighten with a slight nip anyway mate
@BMCMOTOUK
@BMCMOTOUK 7 ай бұрын
Thanks Aidan, much appreciated 👍 God knows when I'll get round to a chain and sprocket change as the chains and sprockets on both bikes are still like new, probably because I clean and lubricate them religiously. Glad the videos are a help to you as it makes them worthwhile knowing I've helped or given someone confidence to do their own maintenance and in turn saving them money on labour at a garage or dealership
@safganik
@safganik 3 ай бұрын
i'm getting soon a new E-CB650R, wanna know oil change is every 6000Km or 12000 ?, im living in extreme dusty weather algerian sahara
@BMCMOTOUK
@BMCMOTOUK 3 ай бұрын
Hi and welcome, off the top of my head I think it’s every 6000km. I personally service my bikes at around 3500 miles and do it myself. I did get the dealer to also service it for the first 2 years to maintain the warranty Congratulations on getting your new bike. I’ve not rode the e clutch version yet but one of the guys at work is waiting on his e clutch 650 coming so I may ask him for a ride on it lol
@SuperRider-RS
@SuperRider-RS Жыл бұрын
i changed oil n oil filter for trident, thankfully oil filter was positioned horizontal, didn't get messy whew
@BMCMOTOUK
@BMCMOTOUK Жыл бұрын
Good man! Doing your own servicing is awesome and you save a lot of money 😁
@SuperRider-RS
@SuperRider-RS Жыл бұрын
@@BMCMOTOUK yup
@BMCMOTOUK
@BMCMOTOUK Жыл бұрын
Proud of you buddy! 👍
@harrycraddock1708
@harrycraddock1708 Жыл бұрын
Where the oil filter took from mate
@BMCMOTOUK
@BMCMOTOUK Жыл бұрын
What do you mean buddy?
@harrycraddock1708
@harrycraddock1708 Жыл бұрын
Sorry mate the tool you used to take the oil filter off 😂
@BMCMOTOUK
@BMCMOTOUK Жыл бұрын
@@harrycraddock1708 got ya! I bought it from Honda along with the filter.
@BMCMOTOUK
@BMCMOTOUK Жыл бұрын
@@harrycraddock1708 check link in the description 😀
@nigelmorgan1824
@nigelmorgan1824 Жыл бұрын
Hi there, I was wondering what rear rack you have fitted to your bike and also your opinion on how useful it is cheers
@BMCMOTOUK
@BMCMOTOUK Жыл бұрын
Hi Nigel, I fitted the Givi rack and pannier rails. As for usefulness, I don't know how I survived without one before. My Top box is the Givi E370NT Monolock Top Case - 37 Litre and I also fitted the Givi M5M Monolock Top Plate as I personally think it looks neater compared to the universal top plate you get with the top box. With regards to the panniers, I wasn't keen on the Givi cases/ bags so I modified my hangers to accept Kriega plates and I mounted my lomo bags instead. My modification was simple and completely reversible should I decide to mount the givi soft cases in the future. Hope this answers your questions. All the best, Sean
@nigelmorgan1824
@nigelmorgan1824 Жыл бұрын
@@BMCMOTOUK Cheers for that Sean
@BMCMOTOUK
@BMCMOTOUK Жыл бұрын
Your welcome Nigel
@Stoyan.Svilenov
@Stoyan.Svilenov 3 ай бұрын
You should tighten it at 30Nm
@BMCMOTOUK
@BMCMOTOUK 3 ай бұрын
Hand tight with a nip is more than enough for me 👌
@Stoyan.Svilenov
@Stoyan.Svilenov 3 ай бұрын
@BMCMOTOUK as a welder, hand tight can be fatal sometimes 😃 that's why i wrote it. But the video is just amazing. Thank you.
@BMCMOTOUK
@BMCMOTOUK 3 ай бұрын
Thanks buddy, I have been spannering for many years so you sort of get the feel for it. Off the top of my head I think the torque value is about 26Nm for the sump. Welding is a fine art and hats off to you! I can just about get by with it. The red mini in the background has been practically rebuilt by me and I had to weld in many new panels for that car. I even had to invest in a spot welder for that project, great bits of kit they are lol
@Stoyan.Svilenov
@Stoyan.Svilenov 3 ай бұрын
@BMCMOTOUK 26Nm is the oil filter, 30Nm is the oil drain :) I'm not profi, so i like to know how to, and what to.. :) but you're welcome
@JT7POV
@JT7POV Жыл бұрын
link to your front and rear stands?
@BMCMOTOUK
@BMCMOTOUK Жыл бұрын
Hi, please check my video description. Everything covered in this video is linked there. All the best
@manos69420
@manos69420 Жыл бұрын
The title is wrong , it should be CB650R instead of 560
@BMCMOTOUK
@BMCMOTOUK Жыл бұрын
Thanks for pointing that out buddy 👍
@manos69420
@manos69420 Жыл бұрын
@@BMCMOTOUK 👍
@BMCMOTOUK
@BMCMOTOUK Жыл бұрын
@manos69420 much appreciated sir!
@Docent82
@Docent82 Жыл бұрын
Привет из России. Если бы поставил на боковую подножку, слилось бы больше масла. И никогда, вообще никогда, не наливай масло в новый фильтр.
@BMCMOTOUK
@BMCMOTOUK Жыл бұрын
Thanks Buddy 👍
Motorbike Cleaning and Coating - New Owner (CB650R)
24:34
WhiteDetails
Рет қаралды 38 М.
Honda CB650R CBR650 Lams Derestriction | How to de restrict
8:23
Mitch Does Coffee
Рет қаралды 26 М.
Как Ходили родители в ШКОЛУ!
0:49
Family Box
Рет қаралды 2,3 МЛН
2020 CB650R first oil change
13:28
Brian Middleton
Рет қаралды 41 М.
Honda CB650R Modifications
10:28
EnglishBikerDan
Рет қаралды 102 М.
How to do an oil change on the new Himalayan 450
14:47
Avid biker
Рет қаралды 88
How to easy remove air filter of cb650r. -(tutorial)-/ Ang dumi.
7:39
Basic Maintenance / Oil Change | Guide | Honda CB650R
3:09
Chill Moto Rides
Рет қаралды 14 М.
How To Flush and Bleed Your Motorcycle Brakes | The Shop Manual
13:50
Suzuki GSX1250FA How to do an Oil Service
3:04
BMC MOTO UK
Рет қаралды 87
Honda CB650R (2019) - new crankcase cover
20:16
Donaldomoto
Рет қаралды 25 М.
Honda CB650R K&N Air Filter upgrade and Fuel Tank Removal
13:50
BMC MOTO UK
Рет қаралды 7 М.