I show you how to change the oil, filter, and oil screen on a 2022 grom.
Пікірлер: 44
@VR6NAVYVW2 жыл бұрын
If you strip a bolt hole on a block or other aluminum threads, you aren't screwed. If you use a King Cert or Timecert you will actually be stronger than it was before. Its basically like a steel sleeve. You drill threads out and retap the hole. Then the Timecert gets red locktighted in and has your original thread in it. Now that the material is steel on the threads you will have many more torquing cycles. We use then when head studs get pulled out on high boost engines.
@Peruqt69Ай бұрын
Ever come across your bike making a strange noise when over 6000 rpm? Sounds like a gripping or slight grinding noise?
@davidreynolds3592 жыл бұрын
Thanks great video 👍🏻
@amonGustavo072 жыл бұрын
Do not torque those case bolts unless you have a very accurate torque wrench
@dominicelek9394 Жыл бұрын
So... You don't put it back together? Yes being sarcastic, what do you consider a very accurate torque wrench?
@user-er1ev6ey3n Жыл бұрын
@@dominicelek9394 hand tighten, tighten 1/8 of a turn by hand, criss cross pattern bottom bolt top bolt left bolt right etc
@joegarcia5611 Жыл бұрын
What we’re the torque specs on oil filter cover
@HondaRider1907 ай бұрын
not a chance I'm taking the case cover off to change the oil on a grom lol.
@G4meCr4sher4 ай бұрын
Specially on the older models with the oil spinner you should do! 2500km and i found 2mm thick mess and aluminium bits in the spinner….
@MotoJosh_3 ай бұрын
You have to to clean the filter
@jaimearroyo37887 ай бұрын
Found a rubber gasket in my oil after I changed it 2:00 can I still ride it or do I have replace it before riding, how important is it?
@Cake...2 жыл бұрын
Nice video. To get to the oil screen, did you need to loosen the rear set to remove the side cover. In other videos I've seen they remove the rear set but you seem to have removed the side cover without having to do this.
@DanesWorld20212 жыл бұрын
I did not remove the rear set, it maybe would have made it alittle easier but definitely not needed!
@Cake...2 жыл бұрын
@@DanesWorld2021 Thanks heaps for the information. Really helps immensely!
@gregoryhodge94523 ай бұрын
I was hoping that the filter would eliminate the screen.😢
@kawaiiowen5 ай бұрын
what did you clean the screen and the area the screen sits in with?
@nate5400 Жыл бұрын
How did u remove the bolt behind the footrest bracket??
@tiajenkins. Жыл бұрын
yea exactly my problem
@MotoJosh_3 ай бұрын
Take off the brake and footrest pedals there should be a bigger bolt and a smaller bolt
@PlasticinaVerde2 жыл бұрын
cant i just change the oil and filter?
@DanesWorld20212 жыл бұрын
You 100% can! I just did an in depth oil change since the engine was new and it had silicone that broke away from factory which can cause that screen to plug up and slow oil flow.
@joegarcia5611 Жыл бұрын
How did those torque specs work for you ?what we’re they 8 ft/lb
@Ryan-7192 жыл бұрын
Did you re seal the cover when cleaning the screen? Or was it a rubber gasket. Just got my 2023 grom
@DanesWorld20212 жыл бұрын
I reused the gasket that was there. Do not use a silicone gasket maker on these! Just get a new gasket from Honda if you are afraid to mess the old one up
@jamesgeorgevellavella19612 жыл бұрын
Damn I just bought the 22 new last week. But in Australia we won’t get it for a year like everything else
@Moonsauc3 Жыл бұрын
@@DanesWorld2021you ever get your grom?
@charkswitlazers Жыл бұрын
Have you experienced the transmission problems with your grom? Wanting to buy one but have seen other videos about that issue that Honda won’t fix
@rioaxjenjsndbejs3613 Жыл бұрын
I have the 4th 5th transmission noise issue on my 23 from under 250 miles. Based off what I read I’m gonna change oil and overfill the amount of oil and see if that works. This issues occurs after 20-30 mins of riding something to do with heat.
@charkswitlazers Жыл бұрын
@@rioaxjenjsndbejs3613 unfortunately I don’t think Honda will fix this issue. They’re notorious for letting things slide and just fixing it with the next model/design. The 2017-2023 CBR1000rr’s have engine problems. Been there done that. They don’t care.
@charkswitlazers Жыл бұрын
@C A no, no they aren’t. Settle down super rider.
@AlexSchuierer2 жыл бұрын
How often should you change the oil on a grom?
@DanesWorld20212 жыл бұрын
Depends on how you ride. If you beat on it often, change often, easy cruising probably every 1k
@VR6NAVYVW2 жыл бұрын
@@KaleRussum who would go 4000...crazy.
@dekzan Жыл бұрын
Can we use any synthetic 10 30 oil ?
@Mr.Gr0m2 жыл бұрын
What you clean the screen with?
@DanesWorld20212 жыл бұрын
A little brake clean will do the job
@Mr.Gr0m Жыл бұрын
@@DanesWorld2021 have you done a spark plug change yet?
@S1KMassie2 жыл бұрын
How often to clean screen
@DanesWorld20212 жыл бұрын
I believe the manual says like every 4-6 thousand, I’m going to check mine every thousand since I beat on this thing pretty hard. Wish I could ride it right now but I went down hard on it about 2 weeks ago and had to have shoulder surgery!
@S1KMassie2 жыл бұрын
@@DanesWorld2021 ahhh man that sucks. But I ride mine hard asf also. Practicing wheelies everyday and at 1500 miles currently with still factory oil 😅 I’m not riding because I put a new cam and intake on with Exhaust. So I’m waiting for stage 2 ecu. But I need that oil change asap. Thanks man
@HuntingWolf822 жыл бұрын
@@DanesWorld2021 what happened?
@DanesWorld20212 жыл бұрын
I came down a little weird from a second shift wheelie, threw me over the bars, landed straight on my shoulder and snapped my collarbone. It was super displaced so they had to put a plate and screws in
@K1774b6 ай бұрын
@@DanesWorld2021I hit some sand while leaned over in a turn and destroyed my collar bone too. Broken in 5 places and now have a titanium plate and 6 screws. Just shy of the first oil change when it happened. Hope you healed up well. Thanks for the video.