2024 NEW DESIGN PF63 Oil Filter Cutaway L5P L8T 5.3 6.2

Will this new design oil filter help protect your engine from lifter failures? unlikely but it sure looks like greater flow ! Check out the cutaway of this new 6.6 L5P Duramax Oil filter also used on 6.6 L8T and the 5.3 / 6.2 engine variants.
Unsure if you will get a new or old design filter, but they can be purchased here: amzn.to/4danE6D
15w40 Engine Oil: amzn.to/3xM4hRk
5w30 Engine Oil: amzn.to/4d9KY4o
0w20 Engine Oil: amzn.to/447mhBw
3.0 Duramax Oil Drain Valve: amzn.to/3Qcojus
3.0 Duramax Oil Change: amzn.to/42RQOTh
3.0 Duramax Fuel Filter: amzn.to/3V8vLub
5.3/6.2 Oil 0W20 Pennzoil: amzn.to/42MDnEh
5.3/6.2 Oil Filter amzn.to/4danE6D
AC Delco 41-114 Spark Plug: amzn.to/48swr0l
ACDelco Fuel Filter: amzn.to/3QFfXex
3.0 Duramax Oil Change W/ PPE Oil Filter: amzn.to/3qmLR6o
3.0 Duramax Oil Change W/ ACDELCO: amzn.to/3QtmDO5
PPE OIL FILTER: amzn.to/3JP9j22
www.duramaxnews.com
www.bankspower.com/demonworks
www.gmparts.co...
As an Affiliate / Influencer, I earn from qualifying purchases. Your support is appreciated as it helps the channel to continue to test products!

[@ExtremDIY]

These AC Delco filters look great with high flow I wish their micron rating was better because they look awesome. Thanks for your content

[@dfields9511]

looks like they are made by Champion Labs. with that plastic core. Same ones that are branded as SuperTech at walmart

[@John115Yonkers]

I wish they would use a synthetic media (like PRBoss)!!! Then PERFECTION! I would ONLY use OEM if they did that GM can, Id pay more for it, especially with this change.

[@user-qb3vi5kk3t]

Go Microgard select even the gasket is synthetic

[@brendancrawford2894]

I wonder what the differences are between the PF63 and the UPF63R

[@DemonWorks]

I have a UPF63r sitting here that I can cut up and we can see the internals.

[@canamxmr4760]

I’m still browsing all your 3.0 content. Freaking lots man. Good info. Have you cut open the PPE one? Also, have you ever had any rattle/buzzing coming from the exhaust while idling?

[@DemonWorks]

I will link the oil filter video on the bottom of this message. Yes, a rattle/buzz is likely from the exhaust backpressure valve (2023/2024 trucks) you can have it replaced and it typically just comes right back. Some people have taken theirs apart and put some grease in there and it quieted it down, I have not tried that. kzbin.info/www/bejne/m4vFkKGZZ7aCnMk

[@canamxmr4760]

@@DemonWorks thanks man!

[@canamxmr4760]

@@DemonWorks sorry to bother you again brother…that’s the valve that’s right before the muffler? Or is that up under the dpf? Btw got yourself a new sub!

[@kevingross7139]

I saw this company. There oil bypass system look legit. Can you try out this system. Want to see what you think.

[@chriscab8333]

anyone try ordering see if they got the new or old variant?

[@RobertKeller-ed4wq]

Do all the AC Delco oil filters have metal end caps now ?

[@DemonWorks]

I am not sure I understand? these oil filters all have metal end caps

[@mooseman3136]

Still junk. The spring/bypass sitting in the end cap will leak and allow oil to go through unfiltered. The amount of holes doesn't change the amount of flow as the restriction would still be the total available out of the outlet which hasn't changed (total area inlet vs outlet). I have since gone to Wix for my LM2.

[@DemonWorks]

I have a video on the cutaways of all filters, I found the Wix to be decent compared to others, like the STP and PPE looking the best. As for the flow, I understand what you are saying but that is assuming the prior style input was matching the output.

[@jameswaas2405]

Couldn't agree more.canned element.

[@mikel3612]

Great video but where do you buy them, even GM Parts Online still list old number?

[@DemonWorks]

Currently, only from the dealer

[@user-qb3vi5kk3t]

Wal mart