2024 VForce4X Reed Valve First Look and Comparison

[@davidanderson2393]

Good to see a first hand look at the new reed valve, I should be receiving one in the next few days, the VForce 4R always gave a nice crisp low end response. Hope it brings back some of the crisp low rpm response like the carb model bikes were known to have, always enjoy your offroad testing.

[@Cee-FJedi]

I see a new addition to your garage in the near future... Something Italian and 300 maybe??? Thanks for the vid. Cheers

[@jimzigouris]

hi,if you want run with oil injection what is the option for 2024 on reed valves?

[@TokyoOffroad]

If you want to continue using oil injection on your 2024 EXC, or XC-W the only option currently is to use the stock reed valve. AFAIK no aftermarket reed valves with oil injection ports are currently available.

[@jimzigouris]

ok,many thanks@@TokyoOffroad

[@seniordiscount4960]

Hi, I put one of these on my 24 TE250 (OIl Inject deleted) . I have it really dialed in with the TSP ERM setup. I did a couple test runs around the property with the new Vforce block and noticed a lot more spooge than I was getting before the V force. runs good though. Did you get increased spooge? Thanks!

[@TokyoOffroad]

I get a little spooge, but not much. Certainly not excessive. I made a video recently which shows how much I get after a day of riding: kzbin.info/www/bejne/m5KafIWhnrikoqssi=6-niQ3BocQSQZDMt

[@enduroid]

hi sir how you feel after vforce4 reeds ıs the power significantly change or a little bit?

[@juandavidpelaez9860]

how does it work?

[@jonasfosse171]

Is there a V-force reed valve for 2021 ktm exc with oil injection?

[@TokyoOffroad]

The V4X26AM is recommended for all fuel injected TPI (oil injection) and TBI (premix only). If you go to the Moto Tassinari web page they have a model finder.

[@jonasfosse171]

@@TokyoOffroad Thanks! Yeah I saw that on their website, but was unsure if it was possible to run it with oil injection still working/connected.

[@keestojuusto6072]

@@TokyoOffroad Thanks I was looking for the info if these are compatible with TPI oil injected. I wasn't aware that they changed the oil injection location for the TBI models.

[@lacave9629]

Hello, is it possible to get feedback on this from now on please? :)

[@TokyoOffroad]

I’ve been using the VForce reed valve for quite a while now (over 70H on the bike), no issues and performance is great.

[@lacave9629]

@@TokyoOffroad What has changed in terms of performance compared to the original?